1 / 8

5 Common Plumbing Mistakes Owner Builders Make (And How to Avoid Them)

Discover the 5 most common plumbing mistakes owner-builders make and learn how to avoid them. Get expert tips to ensure a safe, efficient, and cost-effective plumbing setup for your project.

Owner13
Download Presentation

5 Common Plumbing Mistakes Owner Builders Make (And How to Avoid Them)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 5 Common Plumbing Mistakes Owner Builders Make (And How to Avoid Them)

  2. Why Plumbing Mistake #1 • Rough-In Stage: The plumbing rough-in happens before the walls are sealed, wherepipes arelaid through walls and floors. • Fit-Off Stage: This happens later, once the tiling and waterproofing are complete, and fixtures like taps and sinks are installed. • Mistake: If the rough-in is done incorrectly and the walls are closed, it can lead to costly repairs and delays. • Pro Tip: Confirm the rough-in is complete and correct before the walls are closed. Additionally, make sure your owner builder insurance is in place to protect against potential risks.

  3. Why Plumbing Mistake #2 • Mistake: Forgetting to order fixtures before the rough-in can delay the process and prevent proper installation. • Forgetting to Order Your Tapware and Fixtures • Why It Matters: Without the actual fixtures (e.g., taps, toilets), it’s impossible to get accurate placement, which can lead to delays and errors. • Pro Tip: Have all your fixtures selected and delivered before the rough-in, so the plumber can proceed without delays.

  4. Why Plumbing Mistake #3 • Changing Fixtures Mid-Build • MISTAKE: CHANGING FIXTURES MIDWAY THROUGH THE BUILD, SUCH AS OPTING FOR A NEW TOILET OR SINK AFTER PLUMBING HAS BEEN SET. • CONSEQUENCES: THIS CAN LEAD TO ADDITIONAL PLUMBING WORK, SUCH AS MOVING WATER POINTS OR REWORKING PIPES, WHICH CAN BE COSTLY. • PRO TIP: LOCK IN YOUR FIXTURE CHOICES BEFORE THE ROUGH-IN STAGE AND STICK TO THEM TO AVOID UNNECESSARY REWORK.

  5. Why Plumbing Mistake #4 • MISTAKE: HIRING UNLICENSED OR CHEAPER TRADESPEOPLE TO SAVE ON COSTS CAN LEAD TO SUBSTANDARD WORK AND POTENTIAL PLUMBING ISSUES LATER. • CONSEQUENCES: POORLY EXECUTED WORK, SUCH AS IMPROPERLY LAID PIPES, CAN LEAD TO PROBLEMS LIKE WATER HAMMER OR DRAINAGE ISSUES. • PRO TIP: ALWAYS HIRE A LICENSED PLUMBER WITH GOOD REVIEWS AND INSURANCE TO ENSURE THE WORK IS DONE CORRECTLY AND SAFELY. • Hiring the Cheapest Trade

  6. Plumbing Mistake #5 • Mistake: Rushing the plumbing job can lead to missed steps and faulty work. • Consequences: Skipping critical checks can result in plumbing issues down the line, causing expensive repairs and delays. • Pro Tip: Allocate enough time for inspections and don’t rush your trades to avoid mistakes and future plumbing problems. • Rushing The • Job

  7. Key Takeaways • Avoid Plumbing Mistakes: Understanding rough-in and fit-off stages, being prepared with fixtures, and hiring licensed professionals will save you time and money. • Prepare Early: Lock in fixture choices, avoid rushing the job, and make sure your work is inspected properly. • Protect Your Build: Make sure you have owner builder insurance in place for peace of mind throughout the process.

  8. THANK YOU • hello@theownerbuilderclub.com.au • www.ownerbuilderclub.com.au

More Related