1 / 13

Geotechnical Investigation

Geotechnical Investigation. Step 1 - Gather Existing Information Structure Data Bridge, building, road, wall, etc. Type - stories, loads, materials, etc Known Soil Data Your own knowledge of the area Geologic or other maps Other people Aerial photos. Geotechnical Investigation.

MikeCarlo
Download Presentation

Geotechnical Investigation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Geotechnical Investigation • Step 1 - Gather Existing Information • Structure Data • Bridge, building, road, wall, etc. • Type - stories, loads, materials, etc • Known Soil Data • Your own knowledge of the area • Geologic or other maps • Other people • Aerial photos

  2. Geotechnical Investigation • Step 2 - Field Investigation • Site Recon -Before you move any equipment to site, visit the site • A visual inspection can tell you a lot: • Site access • existing structures • evidence of old structures • environmental hazards • non-engineered fill • sinkholes • topography • condition of nearby structures

  3. Geotechnical Investigation • Step 2 - Field Investigation - cont’d • Subsurface Investigation • Test Pits - holes dug with a backhoe • Borings • Solid Flight • Hollow Stem • Rotary Wash

  4. Geotechnical Investigation • Step 2 - Field Investigation - cont’d • Borings used to obtain samples at various depths • Samples needed depend on project • Most common method of sampling is the • Standard Penetration Test - SPT • Recall SPT is 140 lb hammer dropped 30”

  5. Geotechnical Investigation • Borings - cont’d • Drill rig – Hollow Stem Auger - SPT

  6. Geotechnical Investigation • Borings - cont’d • Drill rig – Hollow Stem Auger - SPT

  7. Geotechnical Investigation • Borings - cont’d • Drill rig – Hollow Stem Auger - SPT

  8. Geotechnical Investigation • Borings – cont’d • # of borings project dependent • For a building, will typically start with corners and in the middle • Based on what is found, more borings can be drilled as needed to define areas of concern or to obtain additional data

  9. Geotechnical Investigation • Borings – cont’d • Layout depends on footprint too • Depth depends on anticipated soil conditions and foundation type • We want to be sure we sample all soil potentially influenced by the foundation system

  10. Geotechnical Investigation • Borings – What are we looking for? • Soil classification • Soft compressible soils • Competent foundation soils • Bedrock • Ground water • Any other subsurface that could affect the project

  11. Geotechnical Investigation • Step 3 – Laboratory Investigation • Most common tests include: • Plasticity (atterbergs) • Sieve • Moisture • Unit Weight • Proctor • Strength tests (unconfined, direct shear, etc.)

  12. Geotechnical Investigation • Step 4 – Design • The design process will take into account all data • Consider loads, soils, type and use of facility, etc. • GE often asks “what is needed” vs. what is calculated

  13. Geotechnical Investigation • Step 4 – Design – cont’d • Some of the main items conveyed to client: • Types of soils • Groundwater • Recommended foundation type or options plus design and construction criteria • Depth to bedrock • Excavatability • Soil compaction criteria • Slope recommendations • Retaining wall design • Boring and Lab test results

More Related