30 likes | 38 Views
Mapeiu2019s extremely high level of flexibility in its production processes is thanks mainly to the professionalism and expertise of the R&D laboratories. This is why Mapei pays so much attention to new trends in materials and proposes a range of systems that provide technical support to help complete the installation of resilient and textile flooring.
E N D
EC1 Plus system for laying linoleum flooring Public areas Internal flooring Installation of resilient flooring TOPCEM PRONTO Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick- drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres of water. Workability time: 40-60 minutes. Set to light foot traffic: after 12 hours. Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings.
Residual humidity after 4 days: less than 2%. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 18-20 kg/m² per cm of thickness according to the grade of compacting. Thermal efficiency: λ = 2,008 W/m·K. Packaging: 25 kg bags. ECO PRIM T Solvent-free acrylic primer with a very low emission level of volatile organic compounds (VOC) for absorbent and non-absorbent substrates. TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Dilution rate: as is on non-absorbent surfaces, 1 : 1 or 1 : 2 on absorbent surfaces. Waiting time before applying smoothing compounds: 1-5 hours according to the surrounding conditions and the absorption of the substrate. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller or brush. Consumption: 0.10-0.20 kg/m². Packaging: 5 and 20 kg drums. ULTRAPLAN Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: New or existing substrates, preparing them to receive all kinds of flooring where a high resistance to loads and traffic required. It is for interior use only. Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres. Workability time: 20-30 minutes. Thickness applied: from 1 to 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 12 hours for ceramic tiles, natural stone, resilient and wood coverings. Application: trowel, rake or pump. EMICODE: EC1 R Plus - very low emission. Colour: grey. Storage: 12 months. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 23 kg bags.
Adhesive Linoleum floor covering