1 / 5

Basic Humidifier Design (1)

Basic Humidifier Design (1). Ribbon heater (Omega KH-108/5-P. Wire through thermal cutoff switch Selco P/N: UP72-70C. Secure using metal tape. Water inlet/outlet ports. Basic Humidifier Design (2). Swagelok fittings drilled for 1/8-inch OD tubes, press fit and glued in place.

Antony
Download Presentation

Basic Humidifier Design (1)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Basic Humidifier Design (1) Ribbon heater (Omega KH-108/5-P Wire through thermal cutoff switch Selco P/N: UP72-70C Secure using metal tape Water inlet/outlet ports

  2. Basic Humidifier Design (2) Swagelok fittings drilled for 1/8-inch OD tubes, press fit and glued in place Swagelok fittings drilled through to accommodate ¼-inch OD tubes

  3. Basic Humidifier Design (3) Slide ¼-inch stainless tubing into each end of Accurel tubing (tight fit). 0.21-inch ID Accurel tubing

  4. Basic Humidifier Design (4) Slide Accurel tubing with end tubes through larger aluminum tube. Assemble humidifier end fitting and cap

  5. Basic Humidifier Design (5) Completely assembled humidifier.

More Related