FORM 1000 – APPLICATION TO DRILL, RECOMPLETE OR REENTER. FORM 1000 – APPLICATION TO DRILL, RECOMPLETE OR REENTER. This presentation will assist you in the completion of the Form 1000. The application to drill, recomplete or reenter. Date of Last Revision: 2007
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
This presentation will assist you in the completion of the Form 1000. The application to drill, recomplete or reenter.
Date of Last Revision: 2007
Rule Requirement: OAC 165:10-3-1
Explanation of Form: All operators shall file Form 1000 before any oil, gas, injection, disposal, service well or stratigraphic test hole is drilled, recompleted, re-entered or deepened. Such notice shall include the name(s) and address(s) of the surface owner(s) of the land upon which the well is to be located. The Commission shall process the application and mail a copy of the permit to drill or re-enter to the surface owner(s). Upon approval, the operator will have six months to commence the permitted operations. A six month extension may be granted without fee providing the Conservation Division staff determines that no material change of condition has occurred, if written request for such extension is received from the operator prior to the expiration of the original permit. Only one extension may be granted. A copy of the approved permit shall be posted at the well site. [Reference OAC 165:10-3-1 and 165:10-1-25 and 165:10-7-31]
Question concerning this Form: Geology Department (405) 521-3086
Box 1: OTC/OCC OPERATOR NUMBER – This is the five digit number that you were given when you became a registered operator with the State of Oklahoma
Box 2: API NUMBER: Leave blank for drilling of a new well. Complete this box only if well is being recompleted, reentered, deepen or amended.
Box 3: NOTICE OF INTENT: Be sure and check the appropriate operation.
Box 4: TYPE OF DRILLING OPERATION: Check type of operation and type of well that will be either drilled, recompleted or reentered.
Box 5: SURFACE LOCATION OF WELL
Box 6: MARK SURFACE LOCATION AND OUTLINE LEASE OR SPACING UNIT IN INK
Box 7: Well will be ________ feet from nearest spacing unit or lease boundary
Box 8: LEASE NAME and WELL NUMBER
Box 9: COMPLETEOPERATOR INFORMATION
Box 10: COMPLETE SURFACE OWNER INFORMATION
Box 11: Is well located on lands under federal jurisdiction?
Box 12: Will a water well be drilled? And Will surface water be used?
Box 13: Date Operation to Begin
Box 14: LIST TARGET FORMATIONS AND DEPTHS (LIMITED TO TEN)
Box 15: SPACING ORDER NUMBER(S) AND SIZE OF UNIT(S)
Box 16: PENDING APPLICATION C.D. NUMBER(S)
Box 17: LOCATION EXCEPTION ORDER NUMBER(S)
Box 18: INCREASED DENSITY ORDER NUMBER(S)
Box 19: WELL DEPTH: This is the same as measured depth for horizontal well
Box 20: GROUND ELEVATION
Box 21: BASE OF TREATABLE WATER
Box 22: SURFACE CASING
Box 23: ALTERNATE CASING PROGRAM USED?
Box 24: CHECKALTERNATIVE CASING PROCEDURE TO BE USED
Box 25.1: COMPLETE PIT INFORMATION
Box 26.1: OCC USE ONLY – Do Not Write in this Box.
Box 27: PROPOSED METHOD FOR DISPOSAL OF DRILLING FLUIDS (MUST BE COMPLETED)
Box 25.2: PIT INFORMATION for additional pits (attach separate sheet if more than two pits will be used)
Box 26.2: OCC USE ONLY – Do Not Write in this Box.
Box 28: Mark Bottom Hole location(s) and outline lease or spacing unit in ink
Box 29: Complete Bottom Hole Information for Directional Well
Box 30: CompleteBottom Hole Information for Horizontal Lateral(s)
Box 31: AFFIDAVIT FOR ALTERNATIVE CASING PROGRAM (Complete if using alternate casing per Box 23 and 24 from the front of this form)
INTENT TO DRILL CHECKLIST - : OCC USE ONLY – Do Not Write in this Box.