1 / 43

Optimal Control Theory

Optimal Control Theory. Prof .P.L.H .Vara Prasad. Dept of Instrument Technology Andhra university college of Engineering. Overview of Presentation. What is control system Darwin theory Open and closed loops Stages of Developments of control systems Mathematical modeling

zoey
Download Presentation

Optimal Control Theory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Optimal Control Theory Prof .P.L.H .Vara Prasad Dept of Instrument Technology Andhra university college of Engineering

  2. Overview of Presentation What is control system Darwin theory Open and closed loops Stages of Developments of control systems Mathematical modeling Stability analysis Dept of Inst Technology Andhra university college of Engineering

  3. What is a control system ? A control system is a device or set of devices to manage, command, direct or regulate the behavior of other devices or  systems. Dept of Inst Technology Andhra university college of Engineering

  4. Darwin (1805) Feedback over long time periods is responsible for the evolution of species. vito volterra - Balance between two populations of fish(1860-1940) Norbert wiener - positive and negative feed back in biology (1885-1964) Dept of Inst Technology Andhra university college of Engineering

  5. Open loop & closed loop “… if every instrument could accomplish its own work, obeying or anticipating the will of others … if the shuttle weaved and the pick touched the lyre without a hand to guide them, chief workmen would not need servants, nor masters slaves.” Hall (1907) : Law of supply and demand must distrait fluctuations Any control system- Letting is to fluctuate and try to find the dynamics. Dept of Inst Technology Andhra university college of Engineering

  6. Closed loop Due to feed back Complex More stable Effect of non-linearity can be minimized by selection of proper reference signal and feed back components Open loop Accuracy depends on calibration. Simple. Less stable. Presence of non-linearities cause malfunctions

  7. Effects of feedback System dynamics normal improved Time constant 1/a 1/(a+k) Effect of disturbance Direct -1/g(s)h(s) reduced Gain is high low gain G/(1+GH) If GH= -1 , gain = infinity Selection of GH is more important in finding stable low Band width high band width

  8. Robot using pattern- recognition process

  9. Temperature control system

  10. Analogous systems

  11. Mathematical model of gyro

  12. Mathematical modeling of physical systems

  13. Stages of Developments of control systems Dept of Inst Technology Andhra university college of Engineering

  14. Example of 2nd order system

  15. optimization Maximize the profit or to minimize the cost dynamic programming . Non linear optimal control

  16. Nature of response -poles

  17. Unit step response of a control system Dept of Inst Technology Andhra university college of Engineering

  18. Steady state errors for various types of instruments Dept of Inst Technology Andhra university college of Engineering

  19. For Higher order systems Rouths –Hurwitz stability criterion & its application Dept of Inst Technology Andhra university college of Engineering

  20. Locus of the Roots of Characteristic Equation Dept of Inst Technology Andhra university college of Engineering

  21. Root Contour Dept of Inst Technology Andhra university college of Engineering

  22. Performance Indices

  23. Frequency response characteristics- Polar plots

  24. Bode plots

  25. Phase & gain margins

  26. Nyquist plots Third order system First order system Second order system

  27. Nyquist stability

  28. Limitations of Conventional Control Theory Applicable only to linear time invariant systems. Single input and single output systems Don’t apply to the design of optimal control systems Complex Frequency domain approach Trial error basis Not applicable to all types of in puts Don't include initial conditions

  29. State Space Analysis of Control Systems Definitions of State Systems Representation of systems Eigen values of a Matrix Solutions of Time Invariant System State Transition Matrix

  30. Definitions State – smallest set of variables that determines the behavior of system State variables – smallest set of variables that determine the state of the dynamic system State vector – N state variables forming the components of vector Sate space – N dimensional space whose axis are state variables

  31. State space representation

  32. State Space Representation

  33. Solutions of Time Invariant System Solution of Vector Matrix Differential Equation X|= Ax (for Homogenous System) is given by X(t) = eAt X(0) (1) Ø(t) = eAt = L -1 [ (sI-A)-1 ] (2)

  34. Solutions of Time Invariant System…(Cont’d) Solution of Vector Matrix Differential Equation X|= Ax+Bu (for Non- Homogenous System) is given by X(t) = eAt X(0) +∫t0 e ^{A(t - T)} * Bu(T) dT

  35. Optimal Control Systems Criteria Selection of Performance Index Design for Optimal Control within constraints

  36. Performance Indices Magnitudes of steady state errors Types of systems Dynamic error coefficients Error performance indexes

  37. Optimization of Control System State Equation and Output Equation Control Vector Constraints of the Problem System Parameters Questions regarding the existence of Optimal control

  38. Controllability A system is Controllable at time t(0) if it is possible by means of an unconstrained control vector to transfer the System from any initial state Xt(0) to any other state in a finite interval of time. Consider X| = Ax+Bu then system is completely state controllable if the rank of the Matrix [ B | AB | …….An-1B ] be n.

  39. Observability A system is said to be observable at time t(0) if, with the system in state Xt(0) it is possible to determine the state from the observation of output over a finite interval of time. Consider X| = Ax+Bu, Y=Cox then system is completely state observable if rank of N * M matrix [C* | A*C* | …… (A*)n-1 C*] is of rank n .

  40. Liapunov Stability Analysis Phase plane analysis and describing function methods – applicable for Non-linear systems Applicable to first and second order systems Liapunov Stability Analysis is suitable for Non-linear and|or Time varying State Equations

  41. Stability in the Sense of Liapunov Stable Equilibrium state Asymptotically Stable Unstable state

  42. Liapunov main stability theorem

  43. Thank you

More Related