1 / 3

DANSYL-POLYMYXIN SYNTHESIS

DANSYL-POLYMYXIN SYNTHESIS. REFERENCE: Schindler and Tueber . Antimicrob . Agents Chemother . 8 :95-104, 1975. . Kris-itd.unair.ac.id (for education purpose only). METHOD:

walden
Download Presentation

DANSYL-POLYMYXIN SYNTHESIS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DANSYL-POLYMYXIN SYNTHESIS REFERENCE: Schindler and Tueber. Antimicrob. Agents Chemother. 8:95-104, 1975. Kris-itd.unair.ac.id (for education purpose only)

  2. METHOD: Make column using Sephadex G-25 in a 50 x 2.5 column. (Bed vol. approx - 100 ml, uses 10-15g dry bead.) Equilibrate column with at least 100 ml of 10mM Na2HPO4 pH7.1/0.145M NaCl buffer. Dissolve 40mgs of Polymyxin B sulfate in 1.2 ml of 0.1M NaHCO3. Dissolve 10mgs of Dansyl-chloride in 0.8 ml of acetone. Add the polymyxin to the Dansyl-chloride and place in the dark for 90 min at room temperature. After incubation load the mixture onto a Sephadex G-50 column (50 x 2.5 cm) equilibrated with 10mM Na-phosphate buffer (pH 7.1) containing 0.145M NaCl. Collect 5-6ml fractions.

  3. The Dansyl-Polymyxin comes out in a fairly broad peak ahead of the unreactedDansyl-chloride peak. Location of the Dansyl-Polymyxin in the collected fractions can be determined by holding a UV lamp over the fractions and looking for fluorescence. The fluorescence of the Dansyl-Polymyxin is yellowish, while the unreactedDansyl-chloride is more blue-green. The fractions containing the Dansyl-polymyxin are extracted into about 1/2 volume of n-butanol. The butanol is then evaporated to dryness in a glass petri dish place inside a dessicator which is then evacuated and placed at temperature of 37C. This takes about 24 hrs. The dried Dansyl-Polymyxin is dissolved in 3 ml of buffer (5mM Hepes, pH 7.0) and stored in aliquots at -20C. The concentration of the Dansyl-polymyxin is determined by dinitrophenylation assay. NOTE:  DPX is now commercially available from Molecular Probes (P13238) in addition to other fluorescently labelledpolymxin B compounds.

More Related