1 / 16

Intermediate Microeconomics

Intermediate Microeconomics. Utility Theory. Utility. A complete set of indifference curves tells us everything we need to know about any individual’s preferences over any set of bundles. However, our goal is to build a model that is useful for describing behavior.

Download Presentation

Intermediate Microeconomics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Intermediate Microeconomics Utility Theory

  2. Utility • A complete set of indifference curves tells us everything we need to know about any individual’s preferences over any set of bundles. • However, our goal is to build a model that is useful for describing behavior. • While indifference curves are often sufficient for this, they are somewhat cumbersome. • Therefore, we will often think of individual preferences in terms of Utility

  3. Utility • Utility is a purely theoretical construct defined as follows: • If an individual strictly prefers bundle A-{q1a,q2a,..,qna} to another bundle B-{q1b,q2b,..,qnb}, then an individual is said to get “a higher level of utility” from bundle A than bundle B. • If an individual is indifferent between a bundle A-{q1a,q2a,..,qna} and another bundle B-{q1b,q2b,..,qnb}, then an individual is said to get “the same level of utility” from bundle A than bundle B. • How is utility related to happiness?

  4. Utility Function • A utility functionU is just a mathematical function that assigns a numeric value to each possible bundle such that: • If an individual strictly prefers bundle A-{q1a,q2a,..,qna} to another bundle B-{q1b,q2b,..,qnb}, then U(q1a,q2a,..,qna) > U(q1b,q2b,..,qnb) • If an individual is indifferent between a bundle A-{q1a,q2a,..,qna} and another bundle B-{q1b,q2b,..,qnb}, then U(q1a,q2a,..,qna) = U(q1b,q2b,..,qnb) • We can often think of individuals using goods as “inputs” to produce “utils”, where production is determined by utility function. * So how do utility functions relate to Indifference curves? (hill of utility)

  5. Constructing a Utility Function • Consider again my preference over Tostitos and Doritos. • What is a utility function can captures my preferences over these goods? • How do we get Indifference Curves from this utility function? • Why wouldn’t this utility function be a good approximation for my preferences over Coke and Chips?

  6. Other Commonly Used Utility Functions • Two other commonly used generic forms for utility functions are: • Quasi-linear Utility: U(q1,q2) = q1a + q2 for 0 < a < 1. • Example? • Cobb-Douglas Utility: U(q1,q2) = q1aq2b for some positive a and b. • Example? • Do they exhibit Diminishing MRS? • To understand what types of situations they would be appropriate models for, let us look deeper at MRS.

  7. Marginal Utility • How does a consumer value a little more of a particular good? • Consider the ratio of the change in utility (ΔU) associated with a small increase in q1 (Δq1), holding the consumption of other goods fixed, or • What happens when Δq1 gets really small? q2 q’2 Δq1 u=8 u=4 q’1 (q’1+Δq1)

  8. Marginal Utility • Marginal Utility of a good 1 (MU1) - the rate-of-change in utility from consuming more of a given good, or “MU1 - the partial derivative of the utility function with respect to good 1” • So what is general expression for marginal utility of good 1 for following utility functions? • U(q1,q2) = aq1 + bq2 • U(q1,q2) = q1aq2b • U(q1,q2) = q1a+ q2

  9. Marginal Utility • So what is the value of marginal utility of good 1 at the bundles {4, 1} and {4, 4} given the following utility functions? • U(q1,q2) = 4q1 + q2 • U(q1,q2) = q13q22 • U(q1,q2) = q10.5 + q2

  10. Comparing Utility functions • Quasi-linear – MRS depends only on quantity of q1 • Cobb-Douglas – MRS depends on quantity of both goods. q2 q2 q1 q1

  11. Ordinal Nature of Utility • There is a major constraint with this concept of marginal utility as a way to measure how much someone values “a little more” of a good. • A Utility function is constructed to summarize underlying preferences. • Since preferences were strictly ordinal, so must be the utility function. • Utility level of one bundle is only meaningful in as much as it is higher, lower, or the same as another bundle. • How much higher isn’t informative. • This also means marginal utility is not very informative in and of itself. • e.g. What does it mean behaviorally that marginal utility equals 16?

  12. Marginal Utility Consider the following thought exercise: • Suppose we increase individual’s q1 by “a little bit” (Δq1), • How much q2 would he be willing to give up for this much more q1? • For small (Δq1), individual’s change in utility will be approximately Δq1 * MU1(q1,q2) • Therefore, we would have to decrease some Δq2 large enough such that: Δq1*MU1(q1,q2) + Δq2*MU2(q1,q2) = 0 or • What does this mean if Δq2 andΔq1 are small? q2 4 Δq1 Δq2 u=4 1 q1

  13. Marginal Utility and MRS • Therefore, MRS is both: • The slope of an indifference curve at a particular point, and • The negative ratio of marginal utilities at that particular point. • Should this be surprising?

  14. Interpreting MRS Equations • Consider the following generic Cobb-Douglas utility functions: U(q1,q2) = q1aq2b U(q1,q2) = aq1 + bq2 • MU1 ? • MU1 ? • MRS? • So what will be value of MRS for the following? • MRS for U(q1,q2) = q10.4q20.6 at {4,4}? • MRS for U(q1,q2) = 5q1 + q2 at {9, 1}? • How do we interpret these values?

  15. Ordinal Nature of Utility and MRS • Consider the following utility functions: u(qq,q2) = q10.2q20.4 v(qq,q2) = q13q26 • What is the expression for MRS for each? • What does this imply? • How is this possible?

  16. Marginal Utility and MRS • Recall our discussion of MRS in the context of indifference curves. • We could only describe MRS at any given point by approximating the slope of each Indifference curve. • With utility function, we can easily calculate MRS at any given bundle. • Given MRS is key to thinking about an individual’s willingness to make trade-offs, this will be important. • In general, modeling preferences in terms of utility functions helps allows us to capture general aspects of preferences in a very manageable way.

More Related