1 / 13

Figure 5.1: Milling machine (left) and steer support parts (right)

Figure 5.1: Milling machine (left) and steer support parts (right). Production cycle. Batch of 12. Production cycle. Batch of 60. Batch of 120. Batch of 300. Time [minutes]. 60. 240. 300. 120. 180. Produce steer supports (1 box corresponds to 12 units = 12 scooters).

vivek
Download Presentation

Figure 5.1: Milling machine (left) and steer support parts (right)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Figure 5.1: Milling machine (left) and steer support parts (right)

  2. Production cycle Batch of 12 Production cycle Batch of 60 Batch of 120 Batch of 300 Time [minutes] 60 240 300 120 180 Produce steer supports (1 box corresponds to 12 units = 12 scooters) Set-up from Ribs to Steer support Produce ribs (1 box corresponds to 24 units = 12 scooters) Set-up from steer support to ribs Figure 5.2: The impact of Set-up times on Capacity

  3. Capacity 0.5 1/p 0.45 0.4 0.35 0.3 0.25 0.2 0.15 0.1 0.05 0 Batch Size 10 50 90 130 170 210 250 290 330 370 410 450 490 530 570 610 650 Figure 5.3.: Capacity as a function of the batch size

  4. Figure 5.4: The impact of batch sizes on inventory

  5. Inventory [in units of xootrs] 133 Steer support inventory Rib inventory 200 260 460 520 600 800 860 1060 1120 1200 1400 1460 Time [minutes] Production cycle Produce ribs Produce steer supports Idle time Set-up from Ribs to Steer support Set-up from steer support to ribs Figure 5.5: The impact of Set-up times on Capacity

  6. Milling Machine Assembly process Set-up time, S 120 minutes - Per unit time, p 2 minutes/unit 3 minutes/unit Capacity (B=12) 0.0833 units/minute 0.33 units/minute Capacity (B=300) 0.4166 units/minute 0.33 units/minute Figure 5.6: Data from the scooter case about set-up times and batching

  7. Capacity 0.5 1/p 0.45 0.4 0.35 Capacity of slowest step other than the one requiring set-up 0.3 0.25 0.2 0.15 0.1 0.05 0 Batch Size 10 50 90 130 170 210 250 290 330 370 410 450 490 530 570 610 650 Batch size is too small, process capacity could be increased (set-up step is at the bottleneck) Batch size is too large, could be reduced with no negative impact on process capacity (set-up is not at the bottleneck) Figure 5.7: Choosing a “good” batch size

  8. Inventory Peak Inventory Inventory Time Production Deplete inventory Production cycle Inventory Time Shipment arrives Order cycle Figure 5.8: Different patterns of inventory levels

  9. Cost per week C(Q) 90 80 70 Cost per week C(Q) 60 50 Inventory cost 40 30 Ordering fees 20 10 0 3000 4000 5000 6000 7000 8000 9000 Order quantity 10000 11000 12000 13000 14000 15000 16000 17000 Figure 5.9: Inventory and ordering costs for different order sizes

  10. Inventory Imax Slope: 1/p-R Slope: -R Time T1 T2 T Figure 4.10: Inventory trajectory for the case of internal production

  11. Extraction Filtering Bottling Set-up time, S - Requires a 30 min. down-time followingevery 4h of production - Capacity (while operating) 80 barrels/h 100 barrels/h 120 barrels/h Figure 5.10: Data for the production of orange juice

  12. Compute Capacity as function ofbatch size Compute cycletime (CT) of the rest of the process Solve for batchsize: Cap(B)=1/CT Set-up times dominate Analyze Set-up timesand Set-upcosts Compute set-upcosts and inventory costs Use EOQmodel or oneof its variants Set-up costs dominate • Set-up time reduction, SMED • Process lay-out Reduce the need for batches Figure 5.11.: Summary of batching

  13. Responsiveness High Set-up occurs atnon-bottleneck=> use smaller batches Reduce set-up times Set-up occurs At bottleneck=> use larger batches Now Higher frontier Low High perunit costs Low perunit costs Costs Figure 5.12.: Choosing a batch size and reducing set-up costs / time

More Related