1 / 35

Validation of capsule filling machine

A Seminar on. Validation of capsule filling machine . Validation vs Qualification Why to validate? Who should do Equipment Validation? Parts of Equipment Validation Validation of capsule filling machine

fearghus
Download Presentation

Validation of capsule filling machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Seminar on Validation of capsule filling machine

  2. Validation vs Qualification • Why to validate? • Who should do Equipment Validation? • Parts of Equipment Validation • Validation of capsule filling machine • References Content:

  3. VALIDATION • Action of proving and documenting that any process, procedure or method actually and consistently leads to the expected results • QUALIFICATION • Action of proving and documenting that any premises, systems and equipment are properly installed, and/or work correctly and lead to the expected results • The term qualification is normally used for equipment, utilities and systems, and validation for processes In this sense, qualification is part of validation. Validation vs qualification

  4. Equipment validation is Vital for • Safety • Fewer interruptions of work • Elimination of premature replacement • cGMP requirement • Reduction of variation in results • Greater confidence in the reliability of results Why to validate?

  5. The user has the ultimate responsibility for equipment qualification. • DQ should always be done by the user. • While IQ for a small and low cost instrument is usually done by the user, and IQ for large, complex and high cost instruments should be done by the vendor. • OQ can be done by either the user or the vendor. • PQ should always be done by the user Who should do Equipment Validation?The vendor or the user?

  6. Equipment qualification / validation includes following things : • User requirements specification (URS) • Design qualification (DQ) • Installation qualification (IQ) • Operational qualification (OQ) • Performance qualification (PQ) Equipment qualification

  7. Validation of capsule filling machine

  8. types of capsule filling machine

  9. Conti…

  10. Conti…

  11. Conti…

  12. Conti…

  13. control parameters for hard gelatin capsule filling machine

  14. control parameters for soft gelatin capsule filling machine

  15. Basic document that is root for all validation and qualification activities • The goal of working out user requirement specifications is to document the needs of the manufacturing department • A well prepared URS is the key to project success • Project without detailed URS have a tendency to demand lots of change later on thus increase cost and start up time • For evaluation of URS, the coordinated approach among production, QA, engineering units of the pharmaceutical company Is required • Some companies even use the services of external resources to create a URS User requirements specification

  16. The key aspects of any URS is to generate a document detailing all the GMP requirements the technical system has to fulfill. • A detail URS will result in a better and more competitive offer for the technical system. • Without comprehensive URS, a pharmaceutical company cannot get a clear understanding of supplier and may be led to a wrong decision. Conti…

  17. Operational requirements of capsule filling equipment • Operation: Production speed_____capsule per minute • Capsule will be filled to the target weight +/-_____%. • The machine shall not experience more than ____% downtime at production speed up to, during an eight-hour production run • Product contact part: shall be constructed from material acceptable to the product Certificates for material, weld and finish shall be provided. Product contact parts are defined Conti…

  18. Power Failure and Recovery: On power failure, the system shall fall into a “safe state”. On power restoration, the system shall not restart without operator or communication-link input Emergency-stop: buttons shall be supplied within the reach of the operator at normal operator stations Alarms and Warnings: Conti…

  19. Conti…

  20. DATA AND SECURITY : Controls provided with a data collection system intended for use in the manufacture of pharmaceutical products shall comply with 21 CFR, Part 11 of the FDA cGMP regulations. Data Collection: Data required for collection Machine rate Alarms and warnings. System status (e.g. “off,” “ on,” “standby” states, etc.) Other (specify) Conti…

  21. ENVIRONMENT • Physical condition • The capsule filler shall be installed in an environment with a temperature range of ______ to ______ °Fahrenheit and relative humidity range of ______ to _____ %. • Vibration levels are: Negligible Other (specify) • Electromagnetic interference levels are: Negligible Other (specify) Conti…

  22. Cleaning The equipment will be cleaned using the following compounds/cleaning agents/detergents: ______________. It is anticipated the equipment will be cleaned on a _____________ basis. Conti…

  23. The Installation Qualification will confirm details from the engineering specifications, equipment purchase order cGMP guidelines and requirements, verify that the equipment has been installed as specified by the vendor Installation Qualification(IQ)

  24. Purchase Details: • The purchase order no. & date shall be checked • The accessories & their spare parts if any shall be checked as per purchase order • The delivery period shall be as per purchase order • Supplier or manufacturer name & address shall be checked • Any deviation observed should be informed to the supplier or manufacturer Conti…

  25. Details of the Equipment • Equipment name, make & model no. shall be recorded • In-house identification no. shall be recorded • Location for installation shall be checked • Utilities required shall be listed down • A detailed specification must be written which highlight those parts of machine that are in product contact • Where stirring devices or augers are used to ensure homogeneity and improve flow then specification of these parts must be checked Conti…

  26. Acceptance CriteriaFor IQ • Fulfill the selection criteria & its purpose of Application • The equipment shall be as per purchase order • Accessories received shall be as per purchase order • Should meet pre-selected design parameters • Manufacturer/supplier shall provide complete equipment manual • Material of construction shall be as per purchase order Conti…

  27. Before initiating OQ ensure that SOP for operation and Cleaning of Capsule Filling Machine is available. • Purpose:To train the qualification team for performing OQ Operational Qualification (OQ)

  28. Procedure • Check all the dynamic attributes of the capsule filler conform to the required specifications • Initiate the actual operation of the equipment to ensure that machine is operate within the desired rate of output. • The operation of indicators, controls and alarms is verified • Oil leaks that could contaminate the process are observed Conti…

  29. Acceptance criteria • All operating inputs provided on the equipment when tested shall-successfully comply -meet tolerance limit • The equipment should successfully perform when operated as per SOP • Critical alarm/indicators provided on the equipment- --calibrated • The equipment when operated shall not - produce abnormal sound -show any discrepancy in its smooth operation. Conti…

  30. PQ activities demonstrates and documents that the equipment is able to perform its intended functions within the variable process limits for a specific product • Acceptance criteria are developed according to the regulatory requirements and production parameters • To ensure that the quality and purity of the product is maintained Performance Qualification(PQ)

  31. The PQ process may also include several challenges to the system challenging the operating limits. The PQ's require replicate testing; triplicate testing as the generally accepted minimum. The PQ will also test the extremes of the operation, or the peak load conditions, but it does not include testing to failure. Conti…

  32. Procedure • The accuracy and precision of placebo powder fill will be evaluated for each capsule size that will be used in normal production • Record the number of damaged capsules • Capsules from throughout the lot/different batches should be tested for weight uniformity • Capsules from throughout the lot/different batches should be tested for blend content uniformity • Production speed i.e capsule per minute should be evaluated Conti…

  33. Berry I.R., and Nash R.A., ”Pharmaceutical Process validation” second edition, revised and expanded; Marcel Dekker series; 83-110 • www.usvalidation.com • SyedImtaiazHaider,Pharmaceutical Master Validation Plan,, st. Luicepress, 114,119,120. references

More Related