1 / 22

Magnetic Fusion Power Plants

Magnetic Fusion Power Plants. Farrokh Najmabadi MFE-IFE Workshop Sept 14-16, 1998 Princeton Plasma Physics Laboratory. Fusion should demonstrate that it can be a safe, clean, & economically attractive option. Gain Public acceptance:

thina
Download Presentation

Magnetic Fusion Power Plants

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Magnetic Fusion Power Plants Farrokh Najmabadi MFE-IFE Workshop Sept 14-16, 1998 Princeton Plasma Physics Laboratory

  2. Fusion should demonstrate that it can be a safe, clean, & economically attractive option • Gain Public acceptance: • Use low-activation and low toxicity material and care in design. • Have operational reliability and high availability: • Ease of maintenance, design margins, and extensive R&D. • Have an economically competitive life-cycle cost of electricity: • Low recirculating power; • High power density; • High thermal conversion efficiency.

  3. Utility Input R &D Needs Development Plan Design Options Mission and Goals Present Data base and Designs Evaluation Based on Customer Attributes Attractiveness Characterization of Critical Issues Feasibility Assessment Assessment Based on Attractiveness & Feasibility Redesign

  4. For superconducting tokamaks,It is b/e (i.e.,bR0/a) that is important, not b • Fusion power density, P ~ b2BT4 =(b/e)2(eBT2)2 • Almost Constant for BT fixed at the TF coil MHD Figure of Merit eBT2 e = a/R

  5. bA/S ( Plasma b) bp /A ( Bootstrap current fraction) Tokamak Research Has Been Influenced by the Advanced Design Program Current focus of tokamak research “Conventional” high-b tokamaks (Pulsed operation) 2nd Stability high-b tokamaks (Too much bootstrap) Advanced tokamak (Balanced bootstrap) PU: Pulsed Operation SS: 2nd Stability FS: 1st Stability, steady-state RS: Reversed-shear

  6. Our Vision of Tokamaks Has Improved Drastically in the Last Decade

  7. Key Performance Parameters of ARIES-RS

  8. ARIES-RS is a conceptual 1000MWe power plant based on a Reversed-Shear tokamak plasma

  9. The ARIES-RS Replacement Sectors are Integrated as a Single Unit for High Availability Key Features • No in-vessel maintenance operations • Strong poloidal ring supporting gravity and EM loads. • First-wall zone and divertor plates attached to structural ring. • No rewelding of elements located within radiation zone • All plumbing connections in the port are outside the vacuum vessel.

  10. The ARIES-RS Blanket and Shield Are Segmented to Maximize Component Lifetime Outer blanket detail • Blanket and shield consists of 4 radial segments. • First wall segment, attached to the structural ring, is replaced every 2.5 FPY. • Blanket/reflector segment is replaced after 7.5 FPY. • Both shield segments are lifetime components: * High-grade heat is extracted from the high-temperature shield; * Ferritic steel is used selectively as structure and shield filler material.

  11. The divertor is part of the replacement module, and consists of 3 plates, coolant and vacuum manifolds, and the strongback support structure The divertor structures fulfill several essential functions: 1) Mechanical attachment of the plates; 2) Shielding of the magnets; 3) Coolant routing paths for the plates and inboard blanket; 4) “superheating” of the coolant; 5) Contribution to the breeding ratio, since Li coolant is used.

  12. Three RF Launchers Are Needed for Current Profile Control in ARIES-RS • The ICRF fast wave launcher uses a folded waveguide cavity with capacitive diaphragms and coax feed • Folded waveguides offer a compact and robust structure and can be built out of low-activation material with thin copper coating.

  13. The ARIES-RS Utilizes An Efficient Superconducting Magnet Design TF Coil Design • 4 grades of superconductor using Nb3Sn and NbTi; • Structural Plates with grooves for winding only the conductor. TF Strcuture • Caps and straps support loads without inter-coil structure; • TF cross section is flattened from constant-tension shape to ease PF design.

  14. Alternative Confinement Systems • No current-drive (low recirculating power): • Stellarators (SPPS): recent advances bring the size in-line with advanced tokamaks. Needs coils and components with complicated geometry. • No superconducting TF coils • Spherical tokamaks (ARIES-ST): Potential for high performance and small size devices for fusion research but requires high beta and perfect bootstrap alignment. Center-post is a challenge. • RFP (TITAN): Simple magnets and potential for high performance. Steady-state operation requires resolution of the conflict between current-drive and confinement.

  15. Stellarator Power Plant Study focused the US Stellarator Activity on Compact Stellarators • Modular MHH configuration represented a factor of two improvement on previous stellarator configuration with attractive features for power plants. • Many critical physics and technology areas were identified.

  16. Spherical Tokamak Option Fusion development devices (e.g., neutron sources): • Modest size machines can produce significant power; • Planned experiments should establish the physics basis. Power Plants: • Recirculating power fraction (mainly Joule losses in the center-post) is the driving force: Maximize plasma beta and minimize the distance between plasma and center-post.

  17. The ARIES-ST Study Has Identified Key Directions for Spherical Tokamak Research • Substantial progress is made towards optimization of ST equilibria with >95% bootstrap fraction: • b = 54%, k = 3; • A feasible center-post design has been developed; • Several methods for start-up has been identified; • Current-drive options are limited; • 1000-MWe ST power plants are comparable in size and cost to advanced tokamak power plants.

  18. Reversed-Field Pinches • High engineering beta as the toroidal field in the plasma is mainly produced by the currents flowing in the plasma. • TITAN Design: Major Radius 3.9 m Minor Radius 0.6 m Neutron wall loading 18 MW/m2 Poloidal b 0.22 Toroidal field at plasma surface -0.4 T Plasma current 18 MA

  19. Reversed-Field Pinches • Pulsed RFP power plants are not attractive (large formation/startup voltseconds, high loop voltage). • Steady-state RFPs require efficient current-drive systems (bootstrap current is small). • Helicity injection (e.g., oscillating fields current drive) is an option but can cause increased transport. • Requires toroidal divertors, impact on dynamo is unknown. • Requires a conducting shell for stability.

  20. Advanced Technologies: High-Temperature Superconductors • YBCO • Highly textured tapes. Short tapes is produced • High current density even at liquid nitrogen temperature as long as B is parallel to the surface of the tape. • BSSCO (2212-2223 varieties) • Wires and tapes have been manufactures (100’s m) • Easier to manufacture than YBCO but they less impressive performance. • Much higher current density and critical field capability compared to Nb3Sn at 4.2K

  21. Advanced Technologies: High-Temperature Superconductors • Physics Implications: • Operation at higher fields (limited by magnet structures and wall loading) • Smaller size, plasma current and current drive requirements. • Engineering Implications: • Operation at higher temperatures simplifies cryogenics (specially is operation at liquid nitrogen temperature is possible) • Decreased sensitivity to nuclear heating of cryogenic environment.

  22. Conclusions • Customer requirements establish design requirements and attractive features for a competitive commercial product. • Progress in the last decade is impressive and indicates that fusion can achieve its potential as a safe, clean, and economically attractive power source. • Additional requirements for fusion research: • A reduced cost development path • Lower capital investment in plants. • For fusion energy objectives, our program must address clearly the relationship between developing an attractive fusion product, the cost of an energy R&D pathway, the changing market place, and quality of environment issues such as global climate change.

More Related