1 / 32

7.3: Circuits and Techniques for High-Resolution Measurement of On-Chip Power Supply Noise

7.3: Circuits and Techniques for High-Resolution Measurement of On-Chip Power Supply Noise. Elad Alon, Vladimir Stojanovi ć , and Mark Horowitz Stanford University Rambus Inc. Motivation and Challenges. Scaling leads to drastic reduction in required supply grid impedance

teenie
Download Presentation

7.3: Circuits and Techniques for High-Resolution Measurement of On-Chip Power Supply Noise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 7.3: Circuits and Techniques for High-Resolution Measurement of On-Chip Power Supply Noise Elad Alon, Vladimir Stojanović, and Mark Horowitz Stanford University Rambus Inc.

  2. Motivation and Challenges • Scaling leads to drastic reduction in required supply grid impedance • Supply noise a concern even for digital circuits • CAD tools to quantify supply noise exist • But haven’t been verified • Measuring supply noise is challenging • 20 GS/s, 8-bit ADC’s aren’t cheap 1mΩ(!)

  3. Measurement Approaches • Sub-sampling oscilloscope • Measure repetitive waveforms • Collect probability distribution of noise • Can’t measure noise dynamics • Need distribution and spectrum to characterize effects of noise on circuits. • Measure autocorrelation to find spectrum of supply noise • Extension of sub-sampling technique • Only need 2 low rate samplers

  4. Outline • Random Noise and Autocorrelation • Measurement Circuits • Measurement Results • Measurement Validation • Conclusions

  5. Random Supply Noise • Supply noise is basically deterministic • But extremely complicated to calculate • “Noise” is a label for a random process • Characterized by its frequency spectrum • Which can be found through autocorrelation

  6. Autocorrelation • Autocorrelation measures how correlated a process is with a delayed version of itself • For a stationary (time-invariant) process: • R() = E[V(t-/2)·V(t+/2)] R(τ) • Example: zero-mean white noise • Each time sample independent • Therefore autocorrelation is σ2 δ() σ2 τ

  7. Power Spectral Density • Power Spectral Density (PSD) is the Fourier transform of R White Noise PSD R(τ) ω τ Low-pass Filtered White Noise R(τ) PSD ω τ

  8. Measuring Autocorrelation • Autocorrelation is an average property • Don’t need to know V for all t • Just need pairs of samples • Nyquist frequency set by minimum  • Not by sampling rate V   Tsamp

  9. Outline • Random Noise and Autocorrelation • Measurement Circuits • Measurement Results • Measurement Validation • Conclusions

  10. Measurement System Block Diagram

  11. Sampler Implementation

  12. Sampling switch • PMOS switch to achieve bandwidth • Separate, higher supply • VddQ = 1.3 V • Noise on VddQ couples to sample node through switch parasitics • VddQ heavily decoupled to Vss

  13. VCO-based ADC • VCO converts V to f • Count clock edges to estimate f • Measures average VCO frequency • Filters high frequency noise

  14. VCO-based ADC cont’d • Simple, cheap ADC • High resolution • 1 LSB = 1/(TwinKVCO) • Random VCO phase dithers count by 1 • Increases resolution with averaging • Bad accuracy • But don’t care since we’re calibrating

  15. Outline • Random Noise and Autocorrelation • Measurement Circuits • Measurement Results • Measurement Validation • Conclusions

  16. Chip Details • 0.13 m tech. with four 1-10 Gb/s serial links1 • Can measure digital (Vdd) and analog (VddA) supplies • Noise generators for validation ASIC Link C Link D Link B Link A Measurement Circuits 1 See papers 21.3 and 21.4 for more information on these links

  17. ADC Calibration Curves • Kvco  2.6 GHz/V • With 1 s conversion: • 1 LSB = 385 V

  18. Measured Supply Noise:Deterministic Variations • All 4 links running at 4 Gb/s, 231 PRBS data • Check for deterministic waveform • ~20mV peak-to-peak noise on Vdd and VddA

  19. Measured Supply Noise:Stationary PSD • 3 frequencies from deterministic noise: • 200 MHz - ASIC core • 400 MHz - ref clock & some link logic • 4 GHz - tail current modulation

  20. Measured Supply Noise:Stationary PSD • Random noise appears mostly white • Saw periodic variations in the supply • Could random noise vary as well?

  21. Outline • Random Noise and Autocorrelation • Measurement Circuits • Measurement Results • Measurement Validation • Conclusions

  22. Are we measuring true supply noise? • We used a separate supply VddQ • Sensitive to low frequency VddQ noise • Is VddQ quiet at low frequencies? • We assumed the noise was stationary • Noise might vary with time • How do we measure varying noise?

  23. Is VddQ really quiet? • Key accuracy concern: • Is VddQ really quiet at low frequencies? • Validation method: • Take 2 waveform measurements • First one with noise averaged out • Second one with noise un-averaged • Compare the 2 measured waveforms

  24. Generating Vdd and VddQ Noise • On-chip noise generators inject square-wave currents onto grid • Current causes on-chip Vss to rise relative to board Vss • If VddQ uncoupled to on-chip Vss: • On-chip VddQ has “half” of Vdd signal

  25. Effect of VddQ Noise on Measurement • Vmeasured(t) = Vdd(t) + avg(VddQ(t->t+Twin)) • If Twin = noise pulse-width: • Noise adds triangle wave to measurement • Height of triangle indicative of VddQ noise

  26. Measured VddQ Noise • Twin = 500 ns • Inject noise onto VddA at 4 MHz and at 1 MHz • Height of “triangle” for 1 MHz noise is negligible. • VddQ noise is minimal.

  27. Is Supply Noise Stationary? • Chip clocks may modulate noise. • Number of transitions random, timing periodic. Clock Chip Current • Modulation is repetitive • Supply noise is cyclostationary. • At same time point in each cycle, noise statistics are the same.

  28. Cyclostationary Noise Clock Vdd   t t • Cyclostationary: R, PSD different at each t. • Keep track of t when measuring R. • Can measure average (stationarized) PSD. • By randomly choosing t. • This is the noise many applications care about.

  29. Measured Cyclostationary Noise Example • Measure PSD of random noise at two different times to see example behavior • Reduce link data-rate to 2 Gb/s to make cyclostationarity more apparent • Most digital logic quiet at end of the cycle.

  30. Measured Supply Noise:Cyclostationary PSDs • Measurement verifies cyclostationary behavior • 1 GHz noise at t2, but not at t1 • Link clock is 1 GHz for this data-rate • Link relatively quiet at t1, active at t2

  31. Conclusions • Noise spectrum is relatively easy to measure • Just need 2 low-rate samplers • VCO provides cheap, high-resolution ADC • Supply noise is not stationary • But often only interested in time average noise • Can measure cyclostationary statistics too • Measurement circuits can validate CAD tools • Designers can check circuits with verified noise

  32. Acknowledgements • This work was funded by C2S2, the MARCO Focus Center for Circuit & System Solutions • V. Abramzon and B. Nezamfar at Stanford University • Rambus RaSer X design team

More Related