1 / 56

Wireless Networking IEEE 802.11 In Depth Module-05

Wireless Networking IEEE 802.11 In Depth Module-05. Jerry Bernardini Community College of Rhode Island. Presentation Reference Material. CWNA Certified Wireless Network Administration Official Study Guide, Fourth Edition, Tom Carpenter, Joel Barrett Chapter-4 Pages 153-200

sinjin
Download Presentation

Wireless Networking IEEE 802.11 In Depth Module-05

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wireless NetworkingIEEE 802.11 In DepthModule-05 Jerry Bernardini Community College of Rhode Island Wireless Networking J. Bernardini

  2. Presentation Reference Material • CWNA Certified Wireless Network Administration Official Study Guide, Fourth Edition, Tom Carpenter, Joel Barrett • Chapter-4 Pages 153-200 • The California Regional Consortium for Engineering Advances in Technological Education (CREATE) project Wireless Networking J. Bernardini

  3. Bits, Bytes, Octets, Frames, Packets • Bits =1 or 0 • Bytes = 8 bits • Octets = 8 bits = Byte • Octet is used by telecommunication people • Byte is used by IT people • Frames = grouping of bits at layer-2 • Packets = grouping of bits at layer-3 • Datagrams = another term for packets Wireless Networking J. Bernardini

  4. Coding – ASCII Table Wireless Networking J. Bernardini

  5. OSI data flow CWNA Guide to Wireless LANs, Second EditionCCRI J. Bernardini

  6. IEEE 802.11 Physical Layer Standards • IEEE wireless standards follow OSI model, with some modifications • Data Link layer divided into two sublayers: • Logical Link Control (LLC) sublayer: Provides common interface, reliability, and flow control • Media Access Control (MAC) sublayer: Appends physical addresses to frames • Physical layer divided into two sublayers: • Physical Medium Dependent (PMD) sublayer: Makes up standards for characteristics of wireless medium (such as DSSS or FHSS) and defines method for transmitting and receiving data • Physical Layer Convergence Procedure (PLCP) sublayer: Performs two basic functions • Reformats data received from MAC layer into frame that PMD sublayer can transmit • “Listens” to determine when data can be sent CWNA Guide to Wireless LANs, Second EditionCCRI J. Bernardini

  7. Data Link Layer - Physical Layer- Data Units MSDU (MAC Service Data Unit) (From upper layers 2304 bytes max) 802.2 Logical Link Control LLC Data Link Layer (Layer-2) MPDU (MAC Protocol Data Unit) 802.11 Media Access Control MAC PSDU (PLCP Service Data Unit) (MPDU = PSDU name change to indicated service needed) PLCP PHY Layer Convergence Protocol Physical Layer (Layer-1) PPDU (PLCP Protocol Data Unit) PMD Physical Medium Dependent Modulated Radio Signal PHY = Physical Layer

  8. Where the IEEE 802.11 Standard Fits

  9. IEEE 802.3 CSMA/CD vs. IEEE 802.11 CSMA/CA • CSMA/CD is for wired collision handling • CSMA/CA is for wireless collision handling • CSMA = Carrier Sense Multiple Access • CD = Collision Detection • CA = Collision Avoidance • Why do collisions occur? • Answer = Two or more stations transmit at the same time • Why is it important to detect or avoid collisions? • Answer = Because there is data loss and retransmission is necessary • Wired networks are designed for the transmitting station to detect most collisions • Many collisions will not be detected by Wireless networks – therefore avoid collisions

  10. IEEE 802.11 Collision Handling CSMA/CA • In CSMA/CA a Wireless node that wants to transmit performs the following sequence: • Listen on the desired channel. • If channel is idle (no active transmitters) it sends a packet. • If channel is busy the node waits random time until transmission stops and then waits an additional time period. • If the channel is still idle at the end of the time period the node transmits its packet otherwise it repeats the process defined in 3 above until it gets a free channel. • Additional support mechanisms such as ACK, RTS/CTS can be used but increase overhead noticeably.

  11. CSMA/CA Collision Handling • 802.11 standard employs half-duplex radios-radios capable of transmission or reception-but not both simultaneously Wired LAN Listening 1 AP-1 Transmitting Data Frames Access Points 2 Listening Wireless Client Transmitting

  12. Carrier Sense Mechanisms • Physical Carrier Sense • Checks received signal strength using RSSI. • Virtual Carrier Sense • Uses a field called the Network Allocation Vector, (NAV) • Uses RTS/CTS protocol as an extension of CSMA/CA.

  13. CSMA/CA and ACK • CSMA/CA also reduces collisions via explicit frame acknowledgment • Acknowledgment frame (ACK): Sent by receiving device to sending device to confirm data frame arrived intact • If ACK not returned, transmission error assumed • CSMA/CA does not eliminate collisions and does not solve hidden node problem

  14. CSMA/CA Request to Send/Clear to Send • Request to Send/Clear to Send (RTS/CTS) protocol: Option used to solve hidden node problem • Significant overhead upon the WLAN with transmission of RTS and CTS frames • Especially with short data packets • RTS threshold: Only packets that longer than RTS threshold transmitted using RTS/CTS

  15. Interframe Spacing ensures no frame overlap and proper frame processing sequence • Interframe spaces (IFS): Intervals between transmissions of data frames • Short IFS (SIFS): For immediate response actions such as ACK, CTS, RTS, fragmented frames • SIFS times vary based upon PHY modulation • FHSS-28us, DHSS-10us, OFDM-16us, HR/DSS-10us, ERP-10us • Point Coordination Function IFS (PIFS): Time used by a device to access medium after it has been asked and then given approval to transmit • PIFS times = SIFS time + PHY slot time • Distributed Coordination Function IFS (DIFS): Standard interval between transmission of data frames • DIFS times = SIFS time + 2x PHY slot time • Extended IFS (EIFS): used when frame reception is incomplete or corrupted • EIFS longest time • EIFS time = SIFS + 8x ACK + Preamble + PLCP header length + DIFS

  16. Contention Window and Backoff Time • Contention Window is a range of integers which is chosen at random to become the backoff time • Backoff time is a random time used to establish a frame-to-transmit • Random Backoff Time = Random Integer x Slot Time • Slot time varies for PHY modulation • FHSS-50us, DHSS-20us, OFDM-9us, HR/DSS-20us, ERP Long Slot-20us, ERP Short Slot-9us, 802.1n-9us Wireless Networking J. Bernardini

  17. Ethernet and 802.11 Frames 1518 7 1 6 6 2 46 - 1500 4 • Ethernet Frame • Wireless Frame Preamble Source Destination Data FCS Type or Length Field Start Of Frame 10 or 18 2 4 or 6 Sync PLCP Header Start Of Frame 2 2 6 6 6 2 6 0 - 2304 4 FCS Source Destination Rec. Adr Trans. Adr Data Sequence Cntrl Duration ID Frame Cntrl MAC Packet DATA Unit, (MPDU)

  18. Frame Categories / Types • Management Frames • Beacon Frame • Probe Frames • Association Frames… more • Control Frames • RTS and CTS Frames • ACK – Acknowledgement Frames… more • Data Frames • Data Payload Frames

  19. Twelve Management Frame Types Wireless Networking J. Bernardini

  20. Eight Control Frames • Used to assist with the delivery of data frames Wireless Networking J. Bernardini

  21. Fifteen Data Frames • The frames that actually carry application data Wireless Networking J. Bernardini

  22. IEEE 802.11 Frame Formats (Bytes per field) CWNA Guide to Wireless LANs, Second Edition

  23. Frame Types and Sizes Wireless Networking J. Bernardini

  24. Transmitting on the WLAN: Fragmentation • Fragmentation: Divide data to be transmitted from one large frame into several smaller ones • Reduces probability of collisions • Reduces amount of time medium is in use • If data frame length exceeds specific value, MAC layer fragments it • Receiving station reassembles fragments • Alternative to RTS/CTS • High overhead • ACKs and additional SIFS time gaps

  25. IEEE 802.11 MAC Functions • Scanning- discover AP or BSS • Synchronization- all stations have the same clock • Frame Transmission- rules for frame transfer • Authentication-allow device in network • Association-after authentication associate with AP • Reassociation-roaming and association with new AP • Data Protection-data encryption protects data • Power Management-save power by sleeping transceiver • Fragmentation-breakup frame for efficiency and interfer. • RTS/CTS- solution to hidden node problem Wireless Networking J. Bernardini

  26. Beacon Management Frame • A special management frame that is used by a client stations seeking a wireless network to join. • Instead of beacon frames a station could use probe request and probe response frames • In an ad hoc (IBSS ) wireless network all stations take turns broadcasting the beacon frame Beacon Beacon S2 S1 AP Control Point Wireless Networking J. Bernardini

  27. Active Scanning (Probes) • A station could use probe request and probe response frames Instead of beacon frames • Station is configured with SSID and switched to a channel • Probe request sent by requesting station • All stations that have the same SSID and have normal configurations respond with a Probe Response frame • The process also involves waiting for ProbeDelay and MinChannel Timers Probe Response Probe Request S2 S1 AP Control Point Wireless Networking J. Bernardini

  28. Passive Scanning (Beacons) • Client stations listens for s beacon from an access point (AP) • If multiple beacons are received the strongest one is selected • The listening station then requests authentication and association Beacons Beacons S2 S1 AP Control Point Wireless Networking J. Bernardini

  29. Authentication and Association • Using the IEEE 802.11 State Machine • Stations are in one of three states • Unauthenticated / Unassociated • Authenticated / Unassociated • Authenticated / Associated • You cannot transmit data frames for processing until you are associated • You cannot transmit associated frames for processing until you are Authenticated Wireless Networking J. Bernardini

  30. IEEE 802.11 State Machine Wireless Networking J. Bernardini

  31. Slot Times • The amount of time a device waits after a collision before retransmitting a packet. • Radio defined time interval or clock tick. • FHSS Slot Time = 50 S • DSSS Slot Time = 20 S • Infrared Slot Time = 8 S • For DSSS: SIFS = 10 S PIFS = SIFS + 1 Slot Time = 10 S + 20 S = 30 S DIFS = PIFS + 1 Slot Time = 30 S + 20 S = 50 S • Time Unit = TU = 1,024 S  1 mS Beacon interval = 100 TU or 100 mS.

  32. Slot Time Notes • Short Slot Times - The amount of time a device waits after a collision before retransmitting a packet. You can increase throughput on 802.11g, 2.4-GHz radios by enabling short slot time (most .11g radios enable this by default). • Reducing the slot time from the standard 20 microseconds to the 9-microsecond short slot time decreases the overall backoff, which increases throughput. • Backoff, which is a multiple of the slot time, is the random length of time a station waits before sending a packet on the LAN. • Many 802.11g radios support short slot time, but some do not. • When short slot time is enabled, the wireless device uses the short slot time only when all clients associated to the 802.11g, 2.4-GHz radio support short slot time. • Short slot time is an 802.11g-only feature and does not apply to 802.11a radios. Wireless Networking J. Bernardini

  33. Communications Process • MAC Access Modes • DCF – CSMA/CA • DCF/PCF – Point Coordinators and Polling Contention Free Delivery Normal Delivery PCF DCF

  34. Communications Options • MAC Layer • Access Methods • DCF – RTS/CTS (optional) Distributed function Wireless MAC Avoids hidden node problem • DCF – PCF (optional) AP polls stations Superframes to allow station to eventually get access Superframe = Beacon + CFP + CP CFP = Contention-Free Period CP = Contention Period

  35. RTS/CTS • Sending unicast packets • Station can send RTS with reservation parameter after waiting for DIFS (reservation determines amount of time the data packet needs the medium) • Acknowledgement via CTS after SIFS by receiver (if ready to receive) • Sender can now send data at once, acknowledgement via ACK • Other stations store medium reservations distributed via RTS and CTS

  36. RTS/CTS DIFS data RTS sender SIFS SIFS CTS ACK receiver  NAV (RTS) DIFS  others NAV (CTS) Access to medium deferred contention NAV – Network Allocation Vector There are generally three setting in APs for RTS/CTS Off, On, and On with Threshold

  37. Fragmentation • Every network has an MTU (Maximum Transmission Unit) size. Packets larger than the allowable MTU size must be broken down into multiple smaller packets, or fragments, to enable them to traverse the network with lower bit error rates, (BER). • Fragment size can typically be set by the user using a threshold setting between 256 and 2,048 bytes. Header Data CRC Threshold Header Data -1 CRC Header Data -2 CRC Drawing not to scale.

  38. Dynamic Rate Switching Wireless Networking J. Bernardini

  39. Dynamic Rate Selection (DRS) • Dynamic Rate Selection or Adaptive Rate Selection/shifting. • 802.11a, 802.11g modes: 54, 48, 36, 24, 18, 12, 9, 6 Mbps • 802.11b mode: 11, 5.5, 2, 1 Mbps • Orinoco 2X mode: 108, 96, 72, 48, 36, 24, 18, 12 Mbps

  40. Example of Sensitivity vs. DR

  41. Data Rate Coverage Areas -85 dBm -76dBm -72 dBm 24 Mbps 18 Mbps 9 Mbps

  42. Chapter-4 Topics • . Wireless Networking J. Bernardini

  43. Wireless Networking J. Bernardini

  44. Wireless Networking J. Bernardini

  45. Wireless Networking J. Bernardini

  46. Wireless Networking J. Bernardini

  47. Association, Reassociation, Disassociation • Covered next week Wireless Networking J. Bernardini

  48. Regulatory Domain Requirements • Covered next week Wireless Networking J. Bernardini

  49. Point Coordination Function (PCF) • Polling: Channel access method in which each device asked in sequence if it wants to transmit • Effectively prevents collisions • Point Coordination Function (PCF): AP serves as polling device or “point coordinator” • Point coordinator has to wait only through point coordination function IFS (PIFS) time gap • Shorter than DFIS time gap

  50. DIFS and DCF frames • If point coordinator hears no traffic after PIFS time gap, sends out beacon frame • Field to indicate length of time that PCF (polling) will be used instead of DCF (contention) • Receiving stations must stop transmission for that amount of time • Point coordinator then sends frame to specific station, granting permission to transmit one frame • 802.11 standard allows WLAN to alternate between PCF (polling) and DCF (contention)

More Related