1 / 57

First analysis steps

First analysis steps. o quality control and optimization o calibration and error modeling o data transformations Wolfgang Huber Dep. of Molecular Genome Analysis (A. Poustka) DKFZ Heidelberg. Acknowledgements. Anja von Heydebreck Günther Sawitzki

shino
Download Presentation

First analysis steps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. First analysis steps o quality control and optimizationo calibration and error modelingo data transformations Wolfgang Huber Dep. of Molecular Genome Analysis (A. Poustka) DKFZ Heidelberg

  2. Acknowledgements Anja von Heydebreck Günther Sawitzki Holger Sültmann, Klaus Steiner, Markus Vogt, Jörg Schneider, Frank Bergmann, Florian Haller, Katharina Finis, Stephanie Süß, Anke Schroth, Friederike Wilmer, Judith Boer, Martin Vingron, Annemarie Poustka Sandrine Dudoit, Robert Gentleman, Rafael Irizarry and Yee Hwa Yang: Bioconductor short course, summer 2002 and many others

  3. a microarray slide Slide: 25x75 mm 4 x 4 or 8x4 sectors 17...38 rows and columns per sector ca. 4600…46000 probes/array Spot-to-spot: ca. 150-350 mm sector: corresponds to one print-tip

  4. Terminology sample: RNA (cDNA) hybridized to the array, aka target, mobile substrate. probe: DNA spotted on the array, aka spot, immobile substrate. sector: rectangular matrix of spots printed using the same print-tip (or pin), aka print-tip-group plate: set of 384 (768) spots printed with DNA from the same microtitre plate of clones slide,array channel: data from one color (Cy3 = cyanine 3 = green, Cy5 = cyanine 5 = red). batch: collection of microarrays with the same probe layout.

  5. Image Analysis Raw data • scanner signal • resolution: • 5 or 10 mm spatial, • 16 bit (65536) dynamical per channel • ca. 30-50 pixels per probe (60 mm spot size) • 40 MB per array spot intensities 2 numbers per probe (~100-300 kB) … auxiliaries: background, area, std dev, …

  6. R and G for each spot on the array. Image analysis 1. Addressing. Estimate location of spot centers. 2. Segmentation. Classify pixels as foreground (signal) or background. • 3. Information extraction. For • each spot on the array and each • dye • foreground intensities; • background intensities; • quality measures.

  7. Segmentation adaptive segmentation seeded region growing fixed circle segmentation Spots may vary in size and shape.

  8. Localbackground ---- GenePix ---- QuantArray ---- ScanAlyze

  9. followed by Dilation: same withmaximum Local background estimation by morphological opening Image is probed with a window (aka structuring element), eg, a square with side length about twice the spot-to-spot distance. Do this separately for red and green images. This 'smoothes away' all structures that are smaller than the window  Image of the estimated background Erosion: at each pixel, replace its value by the minimum value in the window around it.

  10. ? What is (local) background? usual assumption: total brightness = background brightness (adjacent to spot) + brightness from labeled sample cDNA

  11. Quality measures Spot quality • Brightness: foreground/background ratio • Uniformity: variation in pixel intensities and ratios of intensities within a spot • Morphology: area, perimeter, circularity. Slide quality • Percentage of spots with no signal • Range of intensities • Distribution of spot signal area, etc. How to use quality measures in subsequent analyses?

  12. spot intensity data n one-color arrays (Affymetrix, nylon) two-color spotted arrays Probes (genes) conditions (samples)

  13. Microarrays are measurement instruments • have limited measurement precision (‘error bars’) • need calibration • involve technology optimization and fine-tuning • may fail or be mis-operated Technology is complex and crossdisciplinary (biotechnology, nanotechnology, chemistry, physics, robotics; plus the application areas: molecular biology, oncology, pathology, medicine…) Technology and the ways it is applied are still evolving Computational statistics and data analysis can contribute

  14. Raw data are not mRNA concentrations The problem is less that these steps are ‘not perfect’; it is that they may vary from array to array, experiment to experiment.

  15. Systematic Stochastic o similar effect on many measurements o corrections can be estimated from data o too random to be ex-plicitely accounted for o “noise” Calibration Error model Sources of variation amount of RNA in the biopsy efficiencies of -RNA extraction -reverse transcription -labeling -photodetection PCR yield DNA quality spotting efficiency, spot size cross-/unspecific hybridization stray signal

  16. measured intensity of probe k in sample i unspecific gain actual abundance aik, bik all unknown: need to approximately determine from data

  17. Implications quantity of interest data No non-linear terms necessary: Saturation can be avoided in the experiments. Data from well-performed experiments shows no evidence for gross deviations from affine linearity. The flexibility (and complexity) lies in the number of parameters: twice the number of data points! parameters must not all be independent need to make simplifiying assumptions, to reduce the effective number of independent parameters to manageable size. Quality control: verify that assumptions hold for the data at hand Normalization, calibration: estimate parameters for the data at hand Error modeling: control the error bars both of measured yik and of estimated normalization parameters aik,bik

  18. bi per-sample normalization factor bk sequence-wise labeling efficiency log hik ~ N(0,s22) “multiplicative noise” ai per-sample offset Lik local background provided by image analysis eik ~ N(0, bi2s12) “additive noise” A typical set of assumptions

  19. Discussion and extensions Sequence-wise factors bkneed not be explicitely determined if only interested in relative expression levels The simplifying assumptions bring down number of parameters from 2dn to ~2d - the 'rest' is modeled as stochastic, aka noise. Here, array calibration terms ai, bi same for all probes on array - can extend this to include print-tip or plate effects Here, probe affinities bk same for all arrays - can extend this to include batch effects

  20. Quality control: diagnostic plots and artifacts

  21. PCR plates Scatterplot, colored by PCR-plate Two RZPD Unigene II filters (cDNA nylon membranes)

  22. PCR plates

  23. PCR plates: boxplots

  24. array batches

  25. print-tip effects

  26. spotting pin quality decline after delivery of 5x105 spots after delivery of 3x105 spots H. Sueltmann DKFZ/MGA

  27. spatial effects R Rb R-Rbcolor scale by rank another array: print-tip color scale ~ log(G) color scale ~ rank(G) spotted cDNA arrays, Stanford-type

  28. Batches: array to array differences dij = madk(hik -hjk) arrays i=1…63; roughly sorted by time

  29. Density representation of the scatterplot (76,000 clones, RZPD Unigene-II filters)

  30. Calibration (aka normalization) o Correction for systematic variations (e.g. dye efficiencies Cy3/Cy5, detector gain, sample mass) o A parameter estimation task Raw data is heteroskedastic, i.e. variance is not constant ('different data points have different error bars') need for either weighted regression or variance stabilizing data transformation Outliers, long-tailed distributions need for robust methods that do not sensitively depend on e.g. normality

  31. Ordinary regression Minimize the sum of squares residual: "fit" - "data" Problem: all data points get the same weight, even if they come with different variance ('precision') - this may greatly distort the fit! Solution: weight them accordingly (some weights may be zero)

  32. Least Median Sum of Squares Regression: Weighted regression If wik = 1/varik, then minimizing SoS produces the maximum-likelihood estimate for a model with normal errors.

  33. minimize Least trimmed sum of squares regression - least sum of squares - least trimmed sum of squares

  34. But what is the variance of a measured spot intensity? To estimate the variance of an individual probe, need many replicates from biologically identical samples. Often unrealistic. Idea: o use pooled estimate from severalprobes who we expect to have about the same true (unknown) variance varpooled = mean (var individual probes) o there is an obvious dependence of the variance on the mean intensity, hence stratify (group) probes by that.

  35. dependence of variance on mean

  36. Decomposition: signal = (true concentration x gain factor x multiplicative noise) + additive offset + additive noise bi per-sample normalization factor bk sequence-wise labeling efficiency log hik ~ N(0,s22) “multiplicative noise” ai per-sample offset Lik local background provided by image analysis eik ~ N(0, bi2s12) “additive noise”

  37. variance-vs-mean dependence data (cDNA slide) model  quadratic depen-dence of vVar(Yik) on uE(Yik)

  38. variance stabilization • Xu a family of random variables with EXu=u, VarXu=v(u). • Define • var f(Xu ) independent of u “stabilized”

  39. variance stabilizing transformations Advantage: eliminates the need to explicitely account for the variance-mean dependence through weighted regression (cumbersome) - on the transformed scale, all data have the same weight

  40. the arsinh transformation - - - log u ——— arsinh((u+uo)/c)

  41. the transformed model: estimation of parameters from data o for exact replicates: straightforward by maximum likelihood. But we also want to process data sets that involve different samples! o solution: if most (more than half) genes are unchanged, that's almost as good o minority: act as outliers. Use robust variant of ML estimator, à la Least Trimmed Sum of Squares regression.

  42. effects of different data transformations

  43. log generalized log (variance stabilizing) cDNA slide data from H. Sueltmann

  44. Summary log-ratio 'generalized' log-ratio o advantages of variance-stabilizing data-transformation: generally better applicability of statistical methods (hypothesis testing, ANOVA, clustering, classification…) o R package vsn

  45. Oligonucleotide chips

  46. Affymetrix files Main software from Affymetrix: MAS - MicroArray Suite. DAT file: Image file, ~10^7 pixels, ~50 MB. CEL file: probe intensities, ~400000 numbers CDF file: Chip Description File. Describes which probes go in which probe sets (genes, gene fragments, ESTs).

  47. Image analysis DAT image files  CEL files Each probe cell: 10x10 pixels. Gridding: estimate location of probe cell centers. Signal: • Remove outer 36 pixels  8x8 pixels. • The probe cell signal, PM or MM, is the 75th percentile of the 8x8 pixel values. Background: Average of the lowest 2% probe cells is taken as the background value and subtracted. Compute also quality values.

  48. Data and notation PMijg , MMijg= Intensity for perfect match and mismatch probe j for gene g in chip i. i = 1,…, n one to hundreds of chips j = 1,…, J usually 16 or 20 probe pairs g= 1,…, G 8…20,000 probe sets. Tasks: calibrate (normalize) the measurements from different chips (samples) summarize for each probe set the probe level data, i.e., 20 PM and MM pairs, into a single expression measure. compare between chips (samples) for detecting differential expression.

  49. expression measures: MAS 4.0 Affymetrix GeneChip MAS 4.0 software uses AvDiff, a trimmed mean: o sort dj = PMj -MMj o exclude highest and lowest value o J := those pairs within 3 standard deviations of the average

  50. Expression measures MAS 5.0 Instead of MM, use "repaired" version CT CT= MM if MM<PM = PM / "typical log-ratio" if MM>=PM "Signal" = Tukey.Biweight (log(PM-CT)) (… median) Tukey Biweight: B(x) = (1 – (x/c)^2)^2 if |x|<c, 0 otherwise

More Related