1 / 20

Drift property in non-uniform B field.

Drift property in non-uniform B field. T.Sawada June 18, 2004. Electron drift in E and non-uniformed B field. Drift velocity of electron in E, B field (Langevin equation) First order Runge-Kutta integration was applied. Strategy of correction. Determine by the data of B=0 (vd=5cm/usec).

sherry
Download Presentation

Drift property in non-uniform B field.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Drift property in non-uniform B field. T.Sawada June 18, 2004

  2. Electron drift in E and non-uniformed B field • Drift velocity of electron in E, B field (Langevin equation) • First order Runge-Kutta integration was applied

  3. Strategy of correction • Determine by the data of B=0 (vd=5cm/usec). • Execute Runge-Kutta intergration in non-uniform B

  4. Run # 28911 (CR) before correction Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer Z (mm) Layer-dependence of resZ Z-dependence of resZ ( at -1400 < z < -1300 )

  5. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 0 Layer = 1

  6. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 2 Layer = 3

  7. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 4 Layer = 5

  8. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 6 Layer = 7

  9. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 8 Layer = 9

  10. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 10 Layer = 11

  11. Run # 28911 (CR) before correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 12 Layer = 13

  12. Run # 28911 (CR) after correction Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer Z (mm) Layer-dependence of resZ Z-dependence of resZ ( at -1400 < z < -1300 )

  13. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 0 Layer = 1

  14. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 2 Layer = 3

  15. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 4 Layer = 5

  16. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 6 Layer = 7

  17. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 8 Layer = 9

  18. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 10 Layer = 11

  19. Run # 28911 (CR) after correction ( -1400 < z < -1300 ) Cut condition: chi2Pad > 0.02 , chi2Z > 0.02 , -0.4 < lambda (dip angle) <0.4 resZ (mm) resZ (mm) Layer = 12 Layer = 13

  20. Summary • The Mean Value of the residual of Layer(5~13) aprroached almost 0 !! ( Correction of Layer(0~1) is parhaps needed consideration of non-uniformity of the electronic field around Target-holder. ) • I intend to study the following in future :  > improvement of resZ of Layer(0~4) > Z-dependance of resZ.

More Related