1 / 22

PLASTIC DEFORMATION

PLASTIC DEFORMATION. Dislocations and their role in plastic deformation. What are dislocations?. Dislocations are line defects that exist in metals There are two types of dislocations: edge and screw The symbol for a dislocation is

Download Presentation

PLASTIC DEFORMATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PLASTIC DEFORMATION Dislocations and their role in plastic deformation

  2. What are dislocations? • Dislocations are line defects that exist in metals • There are two types of dislocations: edge and screw • The symbol for a dislocation is • The dislocation density in annealed metals is normally r = 106/cm2

  3. Types of dislocations Screw Edge

  4. Dislocation motionplastic deformation Note: Dislocations normally move under a shear stress

  5. How does a dislocation move?

  6. Stress field of a dislocation

  7. Analog to an electric charge

  8. Modes of deformation • Slip • Twinning • Shear band formation

  9. Slip • Dislocations move on a certain crystallographic plane: slip plane • Dislocations move in a certain crystallographic direction: slip direction • The combination of slip direction and slip plane is called a slip system

  10. Slip….. • Slip planes are normally close-packed planes • Slip directions are normally close-packed directions Recall for fcc close-packed planes are {111} Close-packed directions are <110>

  11. Slip systems

  12. Dislocation interaction Positive Positive Repulsion   Positive Negative Attraction & Annihilation  Note: More positive-positive interactions in reality

  13. Positive-positive dislocation interaction • Results in more stress to move dislocations (or cause plastic deformation):called work hardening • This type of interaction also leads to dislocation multiplication which leads to more interactions and more work hardening

  14. Twinning • Common in hcp and bcc structures • Limited deformation but help in plastic deformation in hcp and bcc crystals • Occurs on specific twinning planes and twinning directions

  15. Compare slip and twinning

  16. Shear band formation • Limited non-homogeneous deformation • Very large localized strain e~1 or 100% • Occurs especially under high strain rates • Mechanism of deformation still unclear

  17. Plastic deformation movement of dislocations Strengthening methods

  18. Cold working • Deformation at temperatures below 0.4 Tm • Dislocation density increases from 106/cm2 to 1010-12/cm2 • High dislocation density results in a large number of dislocation interactions which results in high strength and hardness

  19. Solid solution strengthening • Interaction between stress fields of alloy atoms and dislocations • This is the purpose of alloying

  20. Grain size refinement • Small grains result in higher strength • Small grains is equivalent to a large number of grain boundaries in the same volume • Grain boundaries act as barriers to dislocation motion

  21. Mechanism Strength is inversely proportional to grain size s = s0 + kyd-1/2 Hall-Petch equation Smaller grains have more boundary area and hence more barriers to dislocation motion

  22. Precipitation hardening • Precipitates are second-phase particles • Hard precipitates act as barriers to dislocation motion • Applicable only to some alloy systems

More Related