1 / 39

Nitro New Program Training

Nitro New Program Training. December 1, 2009. Nitro bridges the gap between compact basic dispensers and large feature full dispensers too bulky for smaller kitchen environments Probe or probeless operation from the same unit Pre-wired power supply Password protected digital programming

quade
Download Presentation

Nitro New Program Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Nitro New Program Training December 1, 2009

  2. Nitro bridges the gap between compact basic dispensers and large feature full dispensers too bulky for smaller kitchen environments • Probe or probeless operation from the same unit • Pre-wired power supply • Password protected digital programming • Multi-lingual display • Quick change pump • Optional magnetic field reader and inductive probe

  3. Nitro Features • 100-260VAC 50/60Hz main power (constant power) • 24-480VAC trigger signals • Detergent pump output 6 oz./min (180ml / min) • Rinse pump output 1.3 oz./min (40ml / min)

  4. Nitro Button Functions SANITIZER PRIME button primes sanitizer and moves cursor left in programming EXIT button exits the programming and moves cursor right in programming ENTER button enters programming and accepts values entered Rinse Prime / UParrow primes rinse and increases value or moves cursor up Det. Prime / DOWNarrow primes detergent anddecreases value or moves cursor down

  5. Idle Screen & Priming • Idle / Default screen shown when unit is not being programmed • Unit will return to this screen during long periods of no button activity • Press and hold any prime button to prime each pump

  6. Language Screen- English • Press ENTER to modify language • Use UP & DOWN arrows to select between 4 languages • English, Spanish, Portuguese and French • Press ENTER to select desired language • Press DOWN arrow for Rack Count screen

  7. Rack Count • Displays number of rack counts registered • Rack counts are generated by rinse length in conveyor mode or machine operations in door mode • Press DOWN arrow for Information screen

  8. Information Screen • Displays the following information • DET • P = Probeless mode • C = Concentration mode • SP • Not applicable for probeless mode • Detergent set point in concentration mode • Input • Actual probe reading • Press DOWN arrow for new program

  9. New Program • Create new program • Can be for either door or conveyor machine types and probeless or concentration mode • Press ENTER to create new program

  10. Concentration Mode – Detergent Control Mode • Press ENTER to modify setting • Use UP or DOWN arrows to change between probeless or concentration • Press ENTER when concentration is displayed • Press DOWN arrow to advance to machine type

  11. Concentration Mode - Machine Type • Press ENTER to modify setting • Use UP or DOWN arrows to change between conveyor and door • Press ENTER when desired machine type is displayed • Press DOWN arrow to advance to trigger mode

  12. Concentration Mode – Trigger Mode • Press ENTER to modify setting • Use UP or DOWN arrows to change between Detergent/Rinse, Detergent Only or Rinse Only • Press ENTER when desired mode is displayed • Press DOWN arrow to advance to concentration set point

  13. Concentration Mode – Concentration Set Point • Press ENTER to modify setting • Use UP & DOWN arrows to adjust concentration set point • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to feed rate

  14. Concentration Mode – Feed Rate • Controls how quickly set point is reached, high feed rate can lead to over shooting – 5 is a good starting point • Press ENTER to modify setting • Use UP & DOWN arrows to adjust feed rate • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to feed limit

  15. Concentration Mode – Feed Limit • Limits the amount of time that the detergent pump will run without reaching set point • Press ENTER to modify setting • Use UP & DOWN arrows to adjust feed limit in minutes and seconds • Press DOWN arrow to advance to alarm delay

  16. Concentration Mode - Alarm Delay • Amount of time before detergent alarm sounds • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting (minutes / seconds) • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to alarm volume

  17. Concentration Mode - Alarm Volume • Sets volume of audible detergent alarm • Press ENTER to modify setting • Use UP or DOWN arrows to adjust volume • Press ENTER when desired volume is reached • Press DOWN arrow to advance to rinse speed

  18. Concentration Mode - Rinse Speed • Adjust rinse pump speed • Press ENTER to modify setting • Use UP & DOWN arrows to adjust rinse speed • Press ENTER when desired speed is displayed • Press DOWN arrow to advance to rinse length

  19. Concentration Mode – Rinse Delay • For door machine only • Delays rinse pump activation up to 15 seconds • Press ENTER to modify setting • Use UP & DOWN arrows to adjust rinse delay • Press ENTER when desired rinse delay is displayed • Press UP or DOWN arrow to advance to other screens

  20. Concentration Mode - Rinse Length • For conveyor machine type only • Rinse length should match the amount of rinse time per rack • Allows Nitro to count racks on a conveyor machine • Use UP & DOWN arrows to adjust rinse length • Press ENTER when desired length is displayed • Press DOWN arrow to advance to sanitizer speed

  21. Concentration Mode - Sanitizer Speed • Adjust sanitizer pump speed • Press ENTER to modify setting • Use UP & DOWN arrows to adjust sanitizer speed • Press ENTER when desired speed is displayed • Press DOWN arrow to advance to company name • Note: Advance to slide 34 for company name or proceed to next slide for probeless mode new programming

  22. Probeless Mode - Detergent Control Mode • Press ENTER to modify setting • Use UP or DOWN arrows to change between probeless or concentration • Press ENTER when desired mode is displayed • Press DOWN arrow to advance to machine type

  23. Probeless Mode - Machine Type • Press ENTER to modify setting • Use UP or DOWN arrows to change between conveyor and door • Press ENTER when desired machine type is displayed • Press DOWN arrow to advance to trigger mode

  24. Probeless Mode – Trigger Mode • Press ENTER to modify setting • Use UP or DOWN arrows to change between Detergent/Rinse, Detergent Only or Rinse Only • Press ENTER when desired mode is displayed • Press DOWN arrow to advance to recharge time

  25. Probeless Mode - Recharge Time • The “top off” or subsequent detergent feeds after initial new tank detergent feed • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting (minutes & seconds) • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to dwell time (conveyor mode) or dead cycles (door mode)

  26. Probeless Mode - Dwell Time • For conveyor machine type only • Amount of time between initial and subsequent recharges • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting (minutes / seconds) • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to initial charge

  27. Probeless Mode -Dead Cycles • For door machine type only • The number of machine operations that will not get a subsequent recharge • Press ENTER to modify setting • Use UP & DOWN arrows to adjust number of cycles between recharges • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to initial charge

  28. Probeless Mode -Initial Charge • The time the detergent will dispenser for a new tank of water • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting (minutes / seconds) • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to charge clock (conveyor mode) or charge activate (door mode)

  29. Probeless Mode - Charge Clock • For conveyor machine type only • Allows dispenser to provide initial charge after a defined period of time without trigger signals • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting (hours / minutes) • Press ENTER when desired setting is displayed • Press DOWN arrow to advance to rinse speed

  30. Probeless Mode –Charge Activate • For door machine type only • Allows the dispenser to recognize machine fill versus rinse cycle • Trigger mode must be set to “Rinse Only” • Press ENTER to modify setting • Use UP & DOWN arrows to adjust time setting • Press ENTER when desired seconds are displayed • Setting must be greater than normal rinse cycle time • Press DOWN arrow to advance to rinse speed

  31. Probeless Mode - Rinse Speed • Press ENTER to modify setting • Use UP & DOWN arrows to adjust rinse speed • Press ENTER when desired speed is displayed • Press DOWN arrow to advance to rinse length (conveyor mode) or sanitizer speed (door mode)

  32. Probeless Mode - Rinse Length • For conveyor machine type only • Rinse length should match the amount of rinse time per rack • Allows Nitro to count racks on a conveyor machine • Use UP & DOWN arrows to adjust rinse length • Press ENTER when desired length is displayed • Press DOWN arrow to advance to sanitizer speed

  33. Probeless Mode - Sanitizer Speed • Press ENTER to modify setting • Use UP & DOWN arrows to adjust sanitizer speed • Press ENTER when desired speed is displayed • Press DOWN arrow to advance to company name

  34. Company Name • Up to 16 characters • Press ENTER to modify setting • Use LEFT & RIGHT arrows to move between characters • Use UP & DOWN arrows to at adjust each character • Press ENTER when desired name is displayed • Press DOWN arrow to advance to rack count

  35. Rack Count • Displays number of rack counts registered • Rack counts are generated by rinse length in conveyor mode or machine operations in door mode • Press ENTER to reset and follow on-screen instructions • Press DOWN arrow to advance to enter code

  36. Enter New Code • Access Code gains access to system programming setup • Press ENTER to modify access code

  37. Enter Program Code • Use SANITIZER button to move cursor left and EXIT button to move cursor right • Use UP & DOWN arrows to change digit in each position • Press ENTER when access code is displayed • Note: Default value out of box is 0000

  38. Accept Program Code • Press EXIT to accept new access code • Press any other button to reject new access code

  39. Press EXIT to leave programming mode or use UP & DOWN arrows to navigate to other screens to make changes

More Related