1 / 12

Heat Treating Steel

Heat Treating Steel. By: Louie Mysse Brandon Okerlund. Heat Treatment Processes. Tempering Annealing Stress Relieving Normalizing Quenching. Tempering. Reheating a Hardened Material Increases Ductility and Toughness Three Components Temperature Time Cooling Rate.

nevaeh
Download Presentation

Heat Treating Steel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Heat Treating Steel By: Louie Mysse Brandon Okerlund

  2. Heat Treatment Processes • Tempering • Annealing • Stress Relieving • Normalizing • Quenching

  3. Tempering • Reheating a Hardened Material • Increases Ductility and Toughness • Three Components • Temperature • Time • Cooling Rate

  4. Annealing • Heating and holding a suitable temperature followed by an appropriate cooling rate. • Quenching has to occur • Produces desirable changes in the material properties or microstructure

  5. Stress-Relief • Relieves stresses that remain locked in a structure as a consequence of a manufacturing sequence • Welding • Cutting with a torch • Machining

  6. Normalizing • Both Thermal and Microstructure point of view • Thermal • Heating then cooled in still or slightly agitated air

  7. Quenching • Rapid cooling of steel from an elevated temperature • Typical Quenching techniques • Water • Oil • Air

  8. How To Heat Treat In Shop • What is the hardness required? • Refer to Heat Treater’s Guide • How Deep do You Need the Treatment? • Case • Through • What type of Heat Treatment is required? • Tempering, Annealing, Stress-Relief, Normalizing, Quenching

  9. How To Heat Treat In Shop • Turn On Furnace • Set To Appropriate Temperature • Determine from references • Place Metal In Furnace When Up to Temperature • Leave for determined time • Remove and Immediately Quench • Quench in appropriate fluid • Oil, Water, Air • Re-Set Furnace Temperature (Tempering) • Place Metal Back in Furnace (Tempering) • Leave for determined time • Remove and Cool at Designated Rate (Tempering)

  10. Sample Annealing Video

  11. Ordering Heat Treating Processes • Establish the type of steel that will be used • Determine the desired properties • Hardness • Case/Through • Choose the proper quenching technique

  12. References • Metals Handbook Desk Edition, Second Edition. • JR Davis, Davis and Associates, 1998, ASM International • Steel Aluminum Stock List and Reference Book, • Jorgensen Steel, Earle M. Jorgensen Co., 1998. (Section S.)

More Related