Shell and Tube Heat Exchangers

Shell and Tube Heat Exchangers. Goals: By the end of today’s lecture, you should be able to: describe the common shell-and-tube HE designs draw temperature profiles for parallel and counter-current flow in a shell-and-tube HE

1.03k views • 33 slides

Baffling in SHELL-AND-TUBE HEAT EXCHANGERS

388 views • 16 slides

2-4 Shell and Tube Heat exchanger

Outline. 2-4 Shell and tube heat exchangerWhy we use it ?Problem 8.1. engineering-resource.com. Problem Statement. 33,114 lb/hr of n-butyl alcohol at 210 0F is to be cooled to 105 0F using water from 95 to 115 0F. Available for the purpose is a 19 in. ID, two- pass shell exchanger with 204 tubes

1.4k views • 35 slides

Shell and tube heat exchanger

Done By Moh’d Saad Jalmood To Dr. Malek Al Ahmed. Shell and tube heat exchanger. HEADING. What’s a shell and tube heat exchanger? How dose it work ? Common types of shell and heat exchangers Some Pictures The END !!. What’s a Shell and Tube Heat Exchanger ??!.

743 views • 22 slides

Shell & Tube Heat Exchanger (STHE) Overpressure Protection from Tube Rupture

Shell & Tube Heat Exchanger (STHE) Overpressure Protection from Tube Rupture . Colin Deddis, BP Exploration Operating Co Ltd 19 July 2011. STHE Overpressure Protection Acknowledgements. Ian Wyatt, Atkins Ltd Stephen Murray, Health and Safety Executive Bruce Ewan, University of Sheffield

1.6k views • 33 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Choose of the right TEMA type and decide which stream goes in the tubes. Lecture series. Introduction to heat exchangers Selection of the best type for a given application Selection of right shell and tube Design of shell and tube . Contents.

1.14k views • 43 slides

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers. Group 4: Daniel Ehlers David Ehlig Erik Maki Darren Finney Tasnim Mohamed. http://brandguide.tamu.edu/downloads/logos/TAMU-logos-rgb/TAM-Logo/TAM-Logo.png. http://www.jscengineers.com/wp-content/uploads/2011/10/DayRefinery.jpg.

1.11k views • 41 slides

Shell & Tube Heat Exchanger (STHE) Overpressure Protection from Tube Rupture

Shell & Tube Heat Exchanger (STHE) Overpressure Protection from Tube Rupture. Colin Deddis, BP Exploration Operating Co Ltd 19 July 2011. STHE Overpressure Protection Acknowledgements. Ian Wyatt, Atkins Ltd Stephen Murray, Health and Safety Executive Bruce Ewan, University of Sheffield

919 views • 33 slides

Operation of shell and tube heat exchangers

Done by: Keith Goh 3S1 (14) Ng Soon Zhou 3S1 (23) Xiong Xingyu 3S1 (30). Operation of shell and tube heat exchangers. Content. Operations. Two fluids, of different starting temperatures, flow through the heat exchanger. Operation. Operation. Shell and Tube. Shell and Tube.

443 views • 19 slides

SHELL AND TUBE HEAT EXCHANGER

SHELL AND TUBE HEAT EXCHANGER. SHELL AND TUBE HEAT EXCHANGER. With respect to tube layout in the tube bundle, the tubes are commonly laid out on a square pattern or on a triangular pattern .

547 views • 12 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Choose of the right TEMA type and decide which stream goes in the tubes. Lecture series. Introduction to heat exchangers Selection of the best type for a given application Selection of right shell and tube Design of shell and tube. Contents.

1.62k views • 43 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Introduction to Heat Exchanger. A heat exchanger can be defined as any device that transfers heat from one fluid to another or from or to a fluid and the environment. Whereas in direct contact heat exchangers, there is no intervening surface between fluids

1.43k views • 31 slides

Shell and Tube Heat Exchanger

Shell and Tube Heat Exchanger. Frank Faulkenberg Jimmy Huser John Snodgrass Eric Bush David Giles. ME 414: Thermal Fluids.

418 views • 25 slides

HEAT EXCHANGER

HEAT EXCHANGER. By Farhan Ahmad Department of Chemical Engineering, University of Engineering & Technology Lahore. Criteria for the selection of heat exchanger. Suitable on the grounds of operating pressure and temperature, fluid-material compatibility, handling, extreme thermal conditions

685 views • 31 slides

DESIGN OF SHELL AND TUBE HEAT EXCHANGER

DESIGN OF SHELL AND TUBE HEAT EXCHANGER. BY-RAHUL OMAR 0616651020 B.TECH.F(CH). Heat Exchanger Includes. Shell Tubes Working fluids. Heat Exchanger Shell. More expensive to manufacture than tubes Material. Heat Exchanger Tubes. Number of tubes Tube wall thickness

576 views • 9 slides

Heat Exchanger Descaling Chemical | Heat Exchanger Tube Cleaning | How To Remove Limescale From Heat Exchangers

Our water scale cleaning products are designed to be eco friendly and free from toxic chemicals and powders which could harm the environment. Our water scale removers are also safer for equipment and remove more deposits with less damage to the surfaces very easily.

191 views • 6 slides

Tube in Tube Heat Exchanger Market Overview and Cost Structure Analysis

Global Tube in Tube Heat Exchanger Market is classified on the basis of applications and geography. A heat exchanger transfers thermal energy (enthalpy) between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at diverse temperatures and in thermal contact. Loads of heat exchangers are used in the industry.

80 views • 4 slides

Advantages of coiled flow inverter over shell and tube heat exchanger

This study addresses the comparison of CFI over shell and tube heat exchanger. Helical coils have been used in place of baffles as well as of tubes by which, cost is decreased for the same heat exchanger. Normal CFI gives higher heat transfer rates, heat transfer coefficient and less pressure drop up to certain range of Reynolds no. Although everything goes in favor of CFI but simultaneously it has a drawback that at higher Reynolds no. its thermal characteristics get down.

59 views • 2 slides

“Fix Tube Sheet” Heat Exchanger

Gasket. Shell side Outlet. Tube side Inlet. Gasket. Tube Sheet. Shell. End Flange. Cover. Distributor. Saddle. Gasket. Tube side Outlet. Shell side Inlet. Tube Sheet. “Fix Tube Sheet” Heat Exchanger. General Assembly view. Tube Sheet. Baffle. Shell. Tube. Cover.

407 views • 10 slides

2-4 Shell and Tube Heat exchanger

2-4 Shell and Tube Heat exchanger. Outline. 2-4 Shell and tube heat exchanger Why we use it ? Problem 8.1. Problem Statement.

568 views • 35 slides

Shell and Tube Heat Exchanger | Stalwart International

Stalwartu2019s experienced team of engineers have been providing solutions for a wide spectrum of heat exchangers used in various process conditions.

109 views • 7 slides

Shell and tube heat exchangers

AMETEK Fluoropolymer shell and tube heat exchangers are used mostly in the chemical processing industry for heating, cooling, condensing, and evaporating highly corrosive liquids and gases. Sulfuric Acid is the chemical most used with AMETEK FPP heat exchangers. The process of making sulfuric acid can vary, but any company dealing with the manufacturing process has a high potential for the use of a fluoropolymer heat exchanger in their process. Other Acids commonly requiring fluoropolymer heat exchangers are Hydrochloric, Nitric and Hydrofluoric Acids. Another chemical manufacturing industry fluoropolymer heat exchangers are used in is the Chlor-Alkali manufacturing process. The Chlor-Alkali process produces chlorine as well as sodium hydroxide, ammonia hydroxide and hydrogen peroxide through an electrolytic cell. Once the process is complete, the chlorine must be cooled and dried, and the caustic must be condensed. Other applications ideal for fluoropolymer shell and tube heat exchangers is manufacturing of bromine, electronic chemical market which produces ultra-high purity acids for the SEMI conductor industry and Lead Acid Battery industry which uses sulfuric acid in the manufacture of battery paste.

146 views • 2 slides