1 / 12

Heat Treating Fibers for the Tagger Microscope

Heat Treating Fibers for the Tagger Microscope. Why?. J. M c Intyre, March19, 2012. Tagger Microscope Enclosure. J. M c Intyre, March19, 2012. Prototype Version. Straightening. Fiber Splicing. Preheating. Preheat Setup. No Water. Water. No Water. 1200 Watt Heater. Bending. Start.

almira
Download Presentation

Heat Treating Fibers for the Tagger Microscope

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Heat Treating Fibers for the Tagger Microscope J. McIntyre, March19, 2012

  2. Why? J. McIntyre, March19, 2012

  3. Tagger Microscope Enclosure J. McIntyre, March19, 2012

  4. Prototype Version J. McIntyre, March19, 2012

  5. Straightening J. McIntyre, March19, 2012

  6. Fiber Splicing J. McIntyre, March19, 2012

  7. Preheating J. McIntyre, March19, 2012

  8. Preheat Setup No Water Water No Water 1200 Watt Heater J. McIntyre, March19, 2012

  9. Bending Start Preheat Fibers then bend Finish J. McIntyre, March19, 2012

  10. Prototype vs. Full Scale Bending J. McIntyre, March19, 2012 Water

  11. Summary • Bending unit is designed for over night use: • Workers can use the morning to prepare a fiber bundle • Once preheated and set in position, electronics will control a gradual heat up of the fibers and secure the heater when the desired temperature is achieved. • Ambient losses will allow gradual cooling overnight so that workers can remove the bent bundle in the morning. • Foam insulation will completely surround the bending setup to control ambient losses to a manageable level. J. McIntyre, March19, 2012

  12. Tagger Microscope Enclosure Heat Treating Unit J. McIntyre, March19, 2012

More Related