1 / 25

Resident Physics Lectures

Resident Physics Lectures. Attenuation Math. Attenuation. Reduction in amplitude & intensity as sound travels through medium Causes absorption sound energy converted to heat dominant influence in soft tissue reflection scattering. Absorption. Units decibels (dB)

neblett
Download Presentation

Resident Physics Lectures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Resident Physics Lectures Attenuation Math

  2. Attenuation • Reduction in amplitude & intensity as sound travels through medium • Causes • absorption • sound energy converted to heat • dominant influence in soft tissue • reflection • scattering

  3. Absorption • Units decibels (dB) • dB indicates signal gain “+” indicates signal gets larger “-” indicates signal gets smaller • ultrasound absorption is always negative dB • sound always loses intensity • negative sometimes implied dB indicates fraction of intensity lost

  4. Logarithm Review x = log10(y) means10 to what power = y ?or10x = y

  5. Logarithms Review log 1 = 0 log 10 = 1 log 100 = 2 log 10n = n log (1/10) = 10-1 = -1 log (1/100) = 10-2 = -2 log (1/1000) = 10-3 = -3

  6. Gain & Decibels Power In Tissue (attenuation) • decibel definition dB =10 X log10 [power out / power in] Power Out Power Ratio = Power Out / Power In • dB =10 X log10 [power ratio]

  7. Gain & Decibels Power In Tissue (attenuation) Power Out • Power Ratio > 1 • Amplifier • Power Out > Power In • Log [Power ratio] >0 Power Ratio = Power Out / Power In • Power Ratio < 1 • Absorber / Attenuator • Power Out < Power In • Log [Power ratio] <0 • dB =10 X log10 [power ratio]

  8. Power Ratio Power Ratio = Power Out / Power In • dB =10 X log10 [power ratio] logarithms log 1 = 0 log 10 = 1 log 100 = 2 log 10n = n log (1/10) = 10-1 = -1 log (1/100) = 10-2 = -2 log (1/1000) = 10-3 = -3 • Decibel calculation • Power ratio dB • 1 0 • 10 10 • 100 20 • 1/100 -20 • 10 n n X 10 • 2 3

  9. dB Attenuation • dB / 10 indicates # of powers of ten attenuation • Every increase of 10 dB indicates another factor of 10 attenuation

  10. dB: Try Again 10 dB: 1 factor of 10 or 10 you morons 60 dB: 6 factors of 10 or 1,000,000, nyuk, nyuk, nyuk 20 dB: 2 factors of 10 or 10 X 10 or 100 10 dB = 1 power of 10 = 10 20 dB = 2 powers of 10 = 100 60 dB = 6 powers of 10 = 1,000,000

  11. Logarithm Law • Log(A x B) = Log(A) + Log(B) • Log(20) = Log(10) + Log(2)

  12. Logarithm Law • 16 dB = 10 dB + 3 dB + 3 dB X10 X2 X2 = X40 - 16 dB means signal is reduced by a factor of 40

  13. Attenuation & Frequency • Attenuation affected by • medium • frequency • As frequency increases, so does attenuation • bass sound carries farther than treble • high frequency = poorer penetration

  14. Attenuation In Soft Tissue Rule of Thumb • 0.5 dB / cm attenuation for each MHz frequency • “cm” refers to distance of sound travel • other texts may say 1 dB / cm depth / MHz • 1 cm depth equivalent to 2 cm sound travel

  15. Rule of Thumb0.5 dB/cm/MHz • To calculate attenuation (dB) simply multiply rule of thumb by round trip distance & by frequency • 5 MHz sound; 10 cm sound travel • attenuation = 0.5 dB/cm/MHz X 10 cm X 5 MHz = 25 dB • 3.5 MHz sound; 4 cm sound travel • attenuation = 0.5 dB/cm/MHz X 4 cm X 3.5 MHz = 7 dB

  16. Attenuation Coefficient • Attenuation Coefficient = 0.5 * Freq. (dB/cm) (dB/cm/MHz) * (MHz) • indicates fraction of beamintensity lost per unit distanceof sound traval

  17. Attenuation Coefficient • Attenuation Coefficient = 0.5 * Freq. (dB/cm) (dB/cm/MHz) * (MHz)

  18. Attenuation CoefficientComments • Attenuation Coefficient = 0.5 * Freq. (dB/cm) (dB/cm/MHz) (MHz) • Longer path increased attenuation • Higher frequency  increased attenuation coefficient • Higher attenuation coefficient  more attenuation

  19. dB vs. Intensity Ratio • dB attenuation =10 X log10 [intensity ratio] • Fraction attenuated = 1 - intensity ratio dB Intensity Fraction atten. Ratio atten. 1 .79 .21 2 .63 .37 3 .50 .50 4 .40 .60 5 .32 .68 10 .1 .90 20 .01 .99 30 .001 .999

  20. Soft Tissue Attenuation Calculation Attenuation = Attenuation Coefficient X Path Length Freq. Atten Coef. Atten(dB). % Int. Red. Atten(dB) % Int. Red. dB / cm 1 cm 1 cm 10 cm 10 cm 2.0 1.0 1 21 10 90 3.5 1.8 1.8 34 18 98 5.0 2.5 2.5 44 25 99.7 7.5 3.8 3.8 58 38 99.98 10.0 5.0 5.0 68 50 99.999

  21. Attenuation • Why dB? • dB’s can be added together • Rule of thumb doesn’t always work • Attenuation higher in lung & bone than in soft tissue • Attenuation in lung and bone not proportional to frequency Class during lecture on attenuation

  22. Attenuation Coefficients 0.5 dB/cm/MHz is soft tissue average assumed by scanner Tissue Attenuation Coefficient (dB/cm/MHz) • Fat 0.6 • Brain 0.6 • Liver 0.5 • Kidney 0.9 • Muscle 1.0 • Heart 1.1

  23. Half Intensity Depth • Decreases with increasing frequency HID = 3 dB / Attenuation Coefficient HID = 3 dB / Freq (MHz) * 2 Frequency Atten Coef. HID (MHz) dB/cm cm ------------------------------------------------------ 1 0.5 6.0 2 1.0 3.0 5 2.5 1.2 10 5.0 0.6

  24. Attenuation • half intensity depth (HID) • depth where intensity = 50% of original • corresponds to 3dB attenuation 180 150 HID 100 66 39

  25. Practical Implications of Attenuation • limits maximum imaging depth • higher frequencies result in • increased attenuation • decreased imaging depth • improved axial resolution

More Related