1 / 33

Irradiation Facilities at CYCLONE (HIF – LIF – NIF)

Irradiation Facilities at CYCLONE (HIF – LIF – NIF). Guy Berger. Université catholique de Louvain. Centre de Recherches du Cyclotron. Outline. CYCLONE Heavy Ion irradiation Facility (HIF) Light Ion irradiation Facility (LIF) Neutron Irradiation Facilities (NIF): Q – T2

Download Presentation

Irradiation Facilities at CYCLONE (HIF – LIF – NIF)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Irradiation Facilities at CYCLONE(HIF – LIF – NIF) Guy Berger Université catholique de Louvain Centre de Recherches du Cyclotron

  2. Outline • CYCLONE • Heavy Ion irradiation Facility (HIF) • Light Ion irradiation Facility (LIF) • Neutron Irradiation Facilities (NIF): Q – T2 • 2006 Utilization • Foreseen upgrades

  3. CYCLONE • Protons up to 75 MeV • a and heavy ions between 0,6 and 27,5 MeV/AMU Heavy ions produced with an ECR source High charge state (E = 110 Q² / M) «Cocktails» (fast ion changing)

  4. CYCLONE

  5. Heavy Ion irradiation Facility (HIF) • First device testing in LLN: 1992 • Qualification tests : Novembre 1996

  6. HIF Beam: Homogeneity ±10 % on diam. of 25 mm LET range from 0,4 to 56 MeV/mg/cm² Flux from a few part/s cm² to a few 104 Monitoring: Flux Uniformity Calibration: Scan in X and Y Flux calibration with PIPS detector ESA SEU monitor

  7. HIF

  8. HIF

  9. HIF MHS CP65656EV 32K8 SRAM SEU results

  10. Light Ion irradiation Facility (LIF) New Localization

  11. LIF • Energy: • CYCLONE primary energy 65 MeV • DUT energy between 10 and 62 MeV • Flux: Between a few 10 p/s cm² and 5E8 p/s cm²

  12. LIF • Diffusion foil 250µm lead foil • Beam transport tube • avoid the energy losses in and activation of the surrounding air • Beam collimators • between 10 and 80 mm in step of 10 mm in diameter • 2 plane laser diodes and camera. • Water phantom (X-Y-Z)

  13. LIF • Energy degraders • 30 plastic slabs (10 different thicknesses, 3 of each) • Energies between 9.3 and 62 MeV available • X-Y table • Similar to existing HIF one. • Clamp on plate

  14. LIF • large fluxestransmission chamber and annular detector calibrated vs. a precision faraday cup • low fluxes scintillators • 1 thin scintillator placed before the first collimator plate • 1thick scintillator placed at 0 ° for calibration purpose

  15. LIF • FieldPoint PLC • Motor controllers and A/D I/O cards from National Instruments • LabVIEW environment • Beam data flux, reached fluence, dose, energy … • Beam line status. • Component positioning and selection. • Automatic procedures (detector calibration, beam profile …).

  16. Neutron Lines (NIF) Two lines are available: • Mono Energetic Line • High Flux Line

  17. Monoenergetic Neutron Line (Q cave) • Reaction: 7Li (p,n) 7Be Q= - 1,644 MeV • Thin target • Peak energy range: from 25 to 65 MeV • Homogeneity± 10 % on a 25 mm diameter spot • Typical flux: with 10µA proton beam • 10 6n/ cm² s

  18. High Flux Neutron Line (T2 cave) • Reaction: 9Be + d  n + X using a 50 MeV beam • 1 cm thick target • Mean energy: 20.4 MeV (1 MeV equivalent ≈ 1.95) • Typical flux: 7.3 * 1010 neutrons / cm² s at 9 cm from target(spot size ≈ 25 mm diameter)

  19. High Flux Neutron Line (T2 cave) New fixture system • Motor controlled (LabView) • Laser alignment system

  20. High Flux Neutron Line (T2 cave)

  21. High Flux Neutron Line (T2 cave) • Dosimetry - Geometry and the deuterons integrated current  • - Absorbed dose with alanine pellets (range: 50 Gyup to80 kGy, corresponding to 1012 up to • 3.5 x 1015 (1 Mev n/cm²) • Beam control from user station • Monitoring integrated beam current, T° and relative humidity • Coolingduring irradiation down to - 20 degrees • Cold storage after irradiation at -10 degrees

  22. Beam Scheduling • HIF : In 2006 nearly 1400 h scheduled (57 days). Two 5 days period per month ( Monday 8 AM to Friday 12 PM ). • LIF : About 200 h/year scheduled. • NIF : On request.

  23. CYCLONE Beamtime breakdown For 2006

  24. CMS – SLHC in Louvain la Neuve Probe station with cold chuck and instruments: Fully operational !! LabView interface that allow flexible electrical measures, with different instruments and input parameters. Charge Collection Efficiency setup in collab. with CERN (RD50): In construction !! Will have Sr-90 beta source + Hamamatsu photomultiplier (S+P) and 2 lasers beams(visible) facing each other (L), read-out electronics for 7 channels: to study the signal generated on double-sides detectors, measure charge collection efficiency and transient current for very hard irradiated silicon. The tests could be done in a large scale of temperature. L S + P

  25. Foreseen Upgrades and Developments • Co60 source: Refurbishing ready in Q2 2008 • Dose rate (max): 50 Krad/hour (close to the source) • Dose rate (min): 0.3 Krad/hour (1.5 m from source) • LIF flux upgrade: To reach usable flux for SLHC testing • Universal Tester for SEE Characterization: 2008 Developedby TIMA Grenoble France

More Related