1 / 13

External Convection: Laminar Flat Plate

External Convection: Laminar Flat Plate. For a constant property, laminar flow a similarity solution exists for the flow field u ( y ). Major flow parameters:. local boundary layer thickness. local skin friction coefficient. average skin friction coefficient.

leyna
Download Presentation

External Convection: Laminar Flat Plate

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. External Convection: Laminar Flat Plate For a constant property, laminar flow a similarity solution exists for the flow field u(y) Major flow parameters: local boundary layer thickness local skin friction coefficient average skin friction coefficient

  2. External Convection: Laminar Flat Plate For a constant property, laminar flow a similarity solution exists for the flow field u(y) Major heat transfer parameters: local thermal boundary layer thickness uniform surface temperature, Ts local Nusselt number (Pr > 0.6) average Nusselt number uniform surface heat flux, q”s local Nusselt number (Pr > 0.6) average Nusselt number

  3. External Convection: Turbulent Flat Plate For turbulent flow, only empirical relations exist local skin friction coefficient uniform surface temperature, Ts uniform surface heat flux, q”s local Nusselt number (Pr > 0.6) Average parameters assuming xc for Rex,c = 5×105 average skin friction coefficient uniform surface temperature, Ts average Nusselt number For xc= 0 or L >> xc (Rex,L>> Rex,c) average skin friction coefficient uniform surface temperature, Ts average Nusselt number

  4. External Convection: Starting Length where • The effect of an unheated starting length (USL) can be represented on the local Nusselt number as: • Parameters a, b, C, & m depend on • thermal boundary condition: uniform surface temperature (UST) or uniform heat flux (UHF) • flow conditions: laminar or turbulent

  5. External Convection: Starting Length p = 1 (laminar throughout) p = 4 (turbulent throughout) numerical integration for laminar/turbulent flow • Uniform Surface Temperature (UST) • Uniform Heat Flux (UHF) • The Nusselt number (and heat transfer coefficient) are functions of the fluid properties (ν,ρ,α,cp,k) • the effect of variable properties may be considered by evaluating all properties at the film temperature • most accurate solutions often require iteration on the film properties

  6. External Convection: Cylinder in Cross Flow • As with flat plate flow, flow conditions determine heat transfer • Flow conditions depend on special features of boundary layer development, including onset at stagnation point, separation, and onset of turbulence • Stagnation point: location of zero velocity and maximum pressure • boundary layer development under a favorable pressure gradientacceleration of the free stream flow • There is a minimum in the pressure distribution p(x) and toward the rear of the cylinder, the pressure increases. • boundary layer development under an adverse pressure gradient

  7. External Convection: Cylinder in Cross Flow note: • Separationoccurs when the momentum of the free stream flow is insufficient to overcome the adverse pressure gradient • the velocity gradient reduces to zero • flow reversal occurs accompanied by a downstream wake • Location of separation depends on boundary layer transition

  8. External Convection: Cylinder in Cross Flow Afis the area projected perpendicular to free stream drag coefficient • Force (FD) imposed by the flow on the cylinder is composed of two phenomena • friction  boundary layer shear stress • form drag (pressure drag)  pressure differential due to wake

  9. External Convection: Cylinder in Cross Flow • Thermal considerations: uniform surface temperature, Ts • heat transfer a function of the angel of separation θ • empirical correlations are used to determine average Nusselt numbers • Hilpert correlation: Pr ≥ 0.6 • also suitable for non-circular cylinders • Churchill and Bernstein: ReDPr > 0.2

  10. External Convection: Sphere in Cross Flow evaluate fluid properties at T∞except for μs which is evaluated at Ts • Similar flow issues as cylinder in cross flow arise • Thermal considerations: uniform surface temperature, Ts • heat transfer again defined by empirical correlations • Whitaker correlation: • 0.71 < Pr < 380 • 3.5 < ReD < 7.6×104

  11. External Convection: Impinging Jet • Impinging jet consists of a high speed flow impacting a flat surface • generates large convection coefficients • The flow and heat transfer are affected by a number of factors • shape/size of jet, velocity of jet, distance from plate, … • Significant hydrodynamic features: • mixing and velocity profile development in the free jet • stagnation point and zone • velocity profile development in the wall jet

  12. External Convection: Impinging Jet • Local Nusselt number distribution: • Average Nusselt number based on empirical correlations for single nozzles and arrays of nozzles • function of Reynolds number, Pr, distance along wall (ror x), height of jet (H)

  13. External Convection: Impinging Jet valid for valid for • Martin correlation: uniform surface temperature, Ts • single round nozzle • Martin correlation: uniform surface temperature, Ts • single slot nozzle

More Related