1 / 17

Cogeneration in the Forest Products Industry January 2008 by Phil Zirngibl

Cogeneration in the Forest Products Industry January 2008 by Phil Zirngibl. What is Cogeneration?. Cogeneration is the production of electrical energy and another form of useful energy, such as heat or steam, through the sequential use of energy.

kaori
Download Presentation

Cogeneration in the Forest Products Industry January 2008 by Phil Zirngibl

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cogeneration in theForest Products IndustryJanuary 2008byPhil Zirngibl

  2. What is Cogeneration? • Cogeneration is the production of electrical energy and another form of useful energy, such as heat or steam, through the sequential use of energy. • Cogeneration is also often referred to as Combined Heat and Power or “CHP”. Source: US DOE

  3. Cogeneration – how much in the U.S.? • CHP generation represents 9% of electricity generation capacity in the US. • The Forest Products, Chemical and Oil Refining industries combined represent ~90% of the total CHP generation in the U.S. manufacturing sector. • The majority of cogeneration in the Forest Products Industry is from renewable fuels (biomass). Source: US DOE, Midwest CHP Center

  4. Forest Products Industry • Represented primarily by two groups; paper and lumber • Meets more than half its energy requirements through highly efficient cogeneration processes. • Since 1972: • Has increased energy self-sufficiency from 40 to 60% • Utilizes nearly 85% renewable resources for onsite generation • Reduced total energy usage by 30% • Reduced purchased energy by 53% Source: AF&PA

  5. Common Cogeneration Terms • STG = Steam Turbine mechanically coupled to a Generator • GTG = Gas Turbine mechanically coupled to a Generator • WHRB = Waste Heat Recovery Boiler • Combined Cycle GTG = GTG with a WHRB combined with STG • Simple Cycle GTG = Stand alone GTG • Heat Rate = Amount of fuel (in btu’s) required to generate one Kwh of electricity. Commonly expressed in btu/kwh.

  6. Types of cogeneration in the Forest Product Industry Number of facilities with cogeneration Approx 75% of existing cogeneration facilities are in the Paper Products Business Source: MECS 1998

  7. Cogeneration from Steam Boilers in Forest Products Plants (paper) Waste Wood Boiler Green Power Wood-based biomass Steam Turbine High pressure steam Generator Recovery Boiler Lignin Low pressure steam To manufacturing process requirements Typical heat rate ~ 4,500 btu/kwh or 76% efficient

  8. Typical Coal-fired utility generation Power Steam Turbine Boiler High pressure steam Coal Generator Low pressure steam Condenser Typical heat rate ~ 10,000 btu/kwh or 34% efficient

  9. Typical utility Combined Cycle GTG Power Gas Turbine Generator Hot Gas Natural Gas Steam Turbine Waste Heat Recovery Boiler High pressure steam Generator Low pressure steam Condenser Typical heat rate ~ 7,000 btu/kwh or 49% efficient

  10. Typical Simple Cycle GTG Power Gas Turbine Generator Hot Gas Natural Gas Exhaust Typical heat rate ~ 12,000 btu/kwh or 28% efficient

  11. Industrial cogeneration is significantly more efficient that other typical types of commercial electricity generation . . . Typical Heat Rates Typical Heat Rate (btu/kwh) Utility Scale

  12. Cogeneration – Advantages/Issues Advantages: • More efficient than commercial generation despite lack of scale. • Potential to increase renewable generation (esp. in Forest Products Industry) • Provides a reduction in GHG emissions. • Provides advantages of distributed generation (avoids issues w/constrained transmission system). • Potential for advantageous tax treatments • Continued development supported by provisions of the Energy Independence and Security Act of 2007 Issues: • Cogenerated renewable electricity from older installations not valued the same as from newer installations. • Cogenerated renewable electricity must be sold to be eligible for Sec 45 Fed Tax Credit. • Most recent version of Lieberman-Warner Climate Security Act of 2007 doesn’t recognize value of cogeneration. . . in fact, penalizes facilities with cogeneration.

  13. Green Power Green(Renewable) Power = Brown Power + REC* *REC = Renewable Energy Credit (renewable attributes of Green Power)

  14. State RPS

  15. U.S. Electricity Generation by Fuel Total = 4,065 Million MWH/yr * Source US DOE Oct ‘07

  16. Renewable Electricity Generation by type Total US Electric Generation by Fuel* Solar Wind Geothermal MSW/LFG Woody Biomass * Source US DOE Oct ‘07

  17. Renewable Electricity Generation from biomass GP generates ~ 8% of the electricity generated from woody biomass in the US . . . GP Generation from Woody Biomass U.S. generation from Woody Biomass Wood Waste Total US Electric Generation by Fuel* Blk Liquor Solar Wind Geothermal MSW/LFG ~ 8% Woody Biomass 38.7 MM MWH/yr * Source US DOE

More Related