1 / 12

LATERALLY-DRIVEN DEFORMATION-ROBUST MEMS GYROSCOPES

LATERALLY-DRIVEN DEFORMATION-ROBUST MEMS GYROSCOPES WITH THREE SETS OF SYMMETRICALLY ARRANGED FOLDED-BEAM SUSPENSIONS. Speaker : 張淵哲 2009 / 11 / 10. Introduction.

Download Presentation

LATERALLY-DRIVEN DEFORMATION-ROBUST MEMS GYROSCOPES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LATERALLY-DRIVEN DEFORMATION-ROBUST MEMS GYROSCOPES WITH THREE SETS OF SYMMETRICALLY ARRANGED FOLDED-BEAM SUSPENSIONS Speaker : 張淵哲 2009/ 11 / 10

  2. Introduction The MEMS vibratory gyroscope, which detects the Coriolis force proportional to the angular velocity, is used in a wide range of applications, such as personal mobile devices and systems that control the stability of automobiles and robotics. In particular, gyroscopes used in automotive systems, have to guarantee long-term stability and high-reliability for over ten years, even when used at a wide range of temperatures and when subject to mechanical vibratory disturbances.

  3. STRUCTURE DESIGN OF DEFORMATION ROBUST GYROSCOPES

  4. FABRICATION PROCESS

  5. SEM micrograph of gyroscopic structure

  6. SIMULATIONS AND RESULTS

  7. pressure controllable laser doppler vibrometer Mode frequencies

  8. Temperature and pressure controllable probe tester

  9. The signal read-out circuitry and experimental setup

  10. CONCLUSION The SAF helps to improve and reduce the mode frequency shift in a wide temperature range. Additionally, by triangularly arranging the three sets of SAF, the nearest spurious mode was able to be separated by more than several kHz from the drive and sense modes. Future research will focus on improving the linearity of the frequency shift.

  11. Thanks for your listening !!

More Related