1 / 15

Update on alignment kit and stave 250 frame M.Gibson (RAL)

Update on alignment kit and stave 250 frame M.Gibson (RAL). Overall photo of the installation. and one bridge structure. Prototype stavelet frame from QMUL. One bridge structure. light strip for pin hole illumination. Alignment laser.

Download Presentation

Update on alignment kit and stave 250 frame M.Gibson (RAL)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Update on alignment kit and stave 250 frameM.Gibson (RAL)

  2. Overall photo of the installation. and one bridge structure Prototype stavelet frame from QMUL One bridge structure light strip for pin hole illumination Alignment laser

  3. Two bridge structures sitting adjacent to each other at the correct spacing. one can see the Y and the combined X and theta adjusters Moveable upper bridge to which is fixed the Y stage and vacuum jig Y adjuster Fixed lower bridge Combined X and Theta

  4. Detail of one bridge structure sitting over a prototype stavelet This space required for side mounted SMD version

  5. Under granite store with one storage pod completed. Awaiting more bits from OM Detail of under granite store

  6. Stave frame clamp base fulcrum Lifting screw Fixed base Awaiting the clamp arms

  7. Basic Vacuum Jig Components Pillar to link jig to Y stage from underneath One of three vacuum cups and connectors Floating vacuum connection from lower jig to outside world Edge supports Two of 4 load springs Bottom plate Ball joints Top plate Bottom plate

  8. Free state of jig Fixed plate to provide X,Y and theta At maximum extension ball is entirely within the top plate Lifting plate to give Z Silicon edge to provide compression to on detector Contact to stave surface

  9. At typical compression extension ball is visible

  10. Items still being worked on • Awaiting delivery of the required wall components.(OM at RAL) • Awaiting delivery of the required storage components (OM at RAL) • Ivan is working on the software but see ‘current problems’ • The two part self aligning jigs are progressing, hopefully sticking and alignment trials next week

  11. Current Problems • Unfortunately the aluminium section that supports the optics has a CTE that is too big. (It is also in Y the critical direction. The plan is to replace it with a simple fabricated Carbon Fibre (CF) box section using Pultruded CF square tubes and commercially available CF sheet . • Sketch almost ready for construction.

  12. Proposed stave 250 frame basic outline Frame for stave 250 Flexibles to accommodate changes in length as satve and frame are cooled Movable clamp to hold stave cooling pipes Swaglok self sealing quick release couplings

  13. Working drawing soon to be passed out for comment to wire bonders, electrical testers etc. Frame has top and bottom covers and the entire frame sits in an insulated box for testing purposes .

  14. Other box related issues • Material for the outer insulative box is at RAL. Aluminium faced panel with 25mm thick insulation (same as the current box but thicker) .Waiting for final sign off on stave 250 frame to get dims correct. Will have a double glazed window. • Will be fabricated at RAL just like all the other boxes.

  15. Module Shipping • I gather from Peter (P) that we will be receiving modules in at least 2 types of shipping boxes for stave 250. With frame and without frame • I encourage you to make only ONE solution for the real thing. Because.... A) This minimises the chance of operator error (two boxes = double the chance of a mistake) B) we will need only ONE solution to the how to get from box to vacuum jig problem C) It will speed up the process. D) We should try and reduce the handling steps ‘cos they are always fraught! E) At least one of these current solutions means no electrical checking prior to mounting!

More Related