1 / 12

1940 Tacoma Narrows Bridge Collapse (see enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

1940 Tacoma Narrows Bridge Collapse (see www.enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html). This is a linear 2nd-order ODE, which can be rearranged as. w n (= ) is the natural frequency , which equals for a RLC circuit and for a spring-mass-damper

iona-norman
Download Presentation

1940 Tacoma Narrows Bridge Collapse (see enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1940 Tacoma Narrows Bridge Collapse (see www.enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

  2. This is a linear 2nd-order ODE, which can be rearranged as • wn (= ) is the natural frequency, which equals • for a RLC circuit and for a spring-mass-damper • system. • z is the damping ratio, which equals • for a RLC circuit and for a spring-mass-damper • system. Second-Order System Dynamic Response • The general expression for a 2nd-order system is

  3. The two initial conditions used are and y(0)=0. Step-Input Forcing • For step-input forcing, there are 3 specific solutions of the ODE because there are 3 different roots of the characteristic equation (see Appendix I).

  4. Step-Input Forcing Figure 5.6

  5. Step-Input Forcing Terminology Figure 5.7

  6. In-Class Example • A second-order system with z = 0.5 and a natural frequency equal to 1/p Hz is subjected to a step input of magnitude A. Determine the system’s time constant.

  7. Figures 5.9 and 5.10 Sinusoidal-Input Forcing • For sinusoidal-input forcing, the solution typically is recast into expressions for M(w) and f(w) (see Eqns. 5.62-5.64 and Appendix I).

  8. In-Class Example • Is the RLC circuit (R = 2 W; C = 0.5 F; L = 0.5 H) underdamped, critically damped, or overdamped ? • With sine input forcing of 3sin2t: • What is its magnitude ratio ?

  9. The Decibel • The decibel is defined in terms of a power (P) ratio, or base measurand ratio (Q), or magnitude ratio by • The one-half power point, at which the output power is • one-half of the input power, corresponds to • 10log10(1/2) dB = -3 dB

  10. Roll off (dB/decade)

  11. Sine Input [F(t)=KAsin(wt)]: wt 1st-Order System Summary Step Input [F(t)=KA]: t/t

  12. Sine Input [F(t)=KAsin(wt)]: y(t) = f(KA, w/wn, z) w/wn 2nd-Order System Summary Step Input [F(t)=KA]: y(t) = f(KA, wnt, z) wnt

More Related