1 / 46

Tuesday, September 12, 2006

Tuesday, September 12, 2006. Nothing is impossible for people who don't have to do it themselves. - Weiler. BlueGene/L. Shared Memory. Adding more CPUs increase traffic on shared memory-CPU path. Cache coherent systems increase traffic associated with cache/memory management. Today.

imani-watts
Download Presentation

Tuesday, September 12, 2006

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Tuesday, September 12, 2006 Nothing is impossible for people who don't have to do it themselves. - Weiler

  2. BlueGene/L

  3. Shared Memory • Adding more CPUs increase traffic on shared memory-CPU path. • Cache coherent systems increase traffic associated with cache/memory management

  4. Today • Classification of parallel computers. • Programming Models

  5. von Neumann Architecture • A common machine model known as the von Neumann computer. • Uses the stored-program concept. The CPU executes a stored program that specifies a sequence of read and write operations on the memory.

  6. How to classify parallel computers? • Flynn's Classical Taxonomy (1966)

  7. Single Instruction, Single Data (SISD): • A serial (non-parallel) computer • Single instruction: only one instruction stream is being acted on by the CPU during any one clock cycle • Single data: only one data stream is being used as input during any one clock cycle • This is the oldest and until recently, the most prevalent form of computer • Examples: most PCs, single CPU workstations and mainframes.

  8. Single Instruction, Single Data (SISD): .

  9. Single Instruction, Multiple Data (SIMD): • A type of parallel computer • This type of machine typically has an instruction dispatcher, a very high-bandwidth internal network, and a very large array of very small-capacity instruction units. • Apply same operation to different data values. • Picture & analogy.

  10. Single Instruction, Multiple Data (SIMD): • Single instruction: All processing units execute the same instruction at any given clock cycle . • Multiple data: Each processing unit can operate on a different data element. • Best suited for specialized problems characterized by a high degree of regularity, such as image processing.

  11. Single Instruction, Multiple Data (SIMD): • SIMD systems have fallen out of favor as general purpose computers • Still important in fields like signal processing • Examples: • Thinking machine corporation Connection module (CM-1 and CM-2), Maspar

  12. SIMD approach is used in some processors for special operations • Intel Pentium processors with MMX includes small set of SIMD-style instructions designed for use in graphic transformations that involve matrix-vector multiplication. • AMD K6/Athlon processors 3D Now!

  13. Single Instruction, Multiple Data (SIMD): .

  14. Multiple Instruction, Single Data (MISD): • A single data stream is fed into multiple processing units. • Each processing unit operates on the data independently via independent instruction streams. • Does not exist in practice. • Analogy.

  15. Multiple Instruction, Single Data (MISD): • Some conceivable uses might be: • Multiple frequency filters operating on a single signal stream • Multiple cryptography algorithms attempting to crack a single coded message.

  16. Multiple Instruction, Single Data (MISD):

  17. Multiple Instruction, Multiple Data (MIMD): • Currently, the most common type of parallel computer. • Most modern computers fall into this category.

  18. Multiple Instruction, Multiple Data (MIMD): • Multiple Instruction: every processor may be executing a different instruction stream • Multiple Data: every processor may be working with a different data stream • Examples: • Most current supercomputers, networked parallel computers and multi-processor SMP computers.

  19. Single Program Multiple Data (SPMD) • SPMD is a subset of ?

  20. Single Program Multiple Data (SPMD) • SPMD is a subset of MIMD • Simplification for software • Most parallel programs in technical and scientific computing are SPMD

  21. Other approaches to parallelism • Vector computing • (parallelism?) • Operations performed on vectors, often groups of 64 floating point numbers. • A single instruction may cause 64 results to be computed using vectors stored in vector registers. • Memory bandwidth is an order of magnitude greater than non-vector computers.

  22. Parallel Programming Models • Abstraction above hardware and memory architectures. • Inspired by parallel architecture.

  23. Shared Memory Model • Tasks share a common address space, which they read and write asynchronously. • Various mechanisms such as locks / semaphores may be used to control access to the shared memory. • An advantage of this model from the programmer's point of view is that the notion of data "ownership" is lacking, so there is no need to specify explicitly the communication of data between tasks.

  24. Threads Model • A single process can have multiple, concurrent execution paths.

  25. Threads Model • Each thread has local data, but also, shares the entire resources of the program. • Threads communicate with each other through global memory (updating address locations). • This requires synchronization constructs to ensure that more than one thread is not updating the same global address at any time. • Threads are commonly associated with shared memory architectures.

  26. Threads Model Vendor proprietary versions • Problem? Standardization efforts.

  27. From a programming point of view, threads implementations comprise: • A library of subroutines (POSIX threads) • Very explicit parallelism; • Requires significant programmer attention to detail. • APIs such as Pthreads are considered low level primitives.

  28. From a programming point of view, threads implementations comprise: • A set of compiler directives (OpenMP) • Higher level construct to relieve the programmer from manipulating threads • Used with Fortran, C, C++ for programming shared address space machines.

  29. In both cases, the programmer is responsible for determining all parallelism.

  30. Message Passing Model • A set of tasks that use their own local memory during computation. • Multiple tasks can reside on the same physical machine as well across an arbitrary number of machines. • Tasks exchange data through communications by sending and receiving messages.

  31. Message Passing Model • Data transfer usually requires cooperative operations to be performed by each process. • A send operation must have a matching receive operation.

  32. Message Passing Model From a programming point of view: • Message passing implementations commonly comprise a library of subroutines. • The programmer is responsible for determining all parallelism.

  33. Message Passing Model • Variety of message passing libraries have been available since the 1980s. • Problem: portability • In 1992, the MPI Forum was formed with the primary goal of establishing a standard interface for message passing implementations. • MPI is now the "de facto" industry standard for message passing. • For shared memory architectures, MPI implementations usually don't use a network for task communications.

  34. Data Parallel Model • Most of the parallel work focuses on performing operations on a data set. • A set of tasks work collectively on the same data structure, however, each task works on a different partition of the same data structure. • Tasks perform the same operation on their partition of work, for example, "add 4 to every array element".

  35. Data Parallel Model

  36. Data Parallel Model • SIMD machines. • On shared memory architectures, all tasks may have access to the data structure through global memory. • On distributed memory architectures the data structure is split up and resides as "chunks" in the local memory of each task.

  37. Data Parallel Model • Programming with the data parallel model is usually accomplished by writing a program with data parallel constructs. • Compiler Directives:Allow the programmer to specify the distribution and alignment of data.Fortran implementations are available for most common parallel platforms. • Distributed memory implementations of this model usually have the compiler convert the program into standard code with calls to a message passing library (MPI usually) to distribute the data to all the processes. All message passing is done invisibly to the programmer. • High Performance Fortran (HPF): Extensions to Fortran 90 to support data parallel programming.

  38. Hybrid Model Environment of networked SMP machines Combination of the message passing model (MPI) with either the threads model (POSIX threads) or the shared memory model (OpenMP).

  39. Historically, architectures were often tied to programming models.

  40. Message passing model on a shared memory machine MPI on SGI Origin. • The SGI Origin employed the CC-NUMA type of shared memory architecture, where every task has direct access to global memory. • Ability to send and receive messages with MPI.

  41. Shared memory model on a distributed memory machine Kendall Square Research (KSR) ALLCACHE approach. • Machine memory was physically distributed, but appeared to the user as a single shared memory (global address space). • This approach is referred to as "virtual shared memory". • KSR approach is no longer used. No common distributed memory platform implementations currently exist.

  42. There certainly are better implementations of some models over others.

  43. Networks for Connecting Parallel Systems • Simple buses, 2-D and 3-D meshes, hypercube network topologies … • In the past, understanding details of topologies was important for the programmers.

  44. CPU Parallelism Superscalar parallelism.

  45. CPU Parallelism • Amount of parallelism by superscalar processors is limited by instruction look ahead. • Hardware logic for dependency analysis is 5-10% of total logic on conventional microprocessors

  46. CPU Parallelism Explicitly parallel instructions. • Each instruction contains explicit sub-instructions for each of the use of each of the different functional units in the CPU • Very long instruction word (VLIW) ISAs. • Relies on compilers to resolve dependencies. Instructions that can be executed concurrently are packed into groups and sent to processor as a single long instruction word. • Example: Intel Itanium

More Related