How to Troubleshooting AVG Remote Admin Installation?

1. How to Troubleshooting AVG Remote Admin Installation? AVG Antivirus is popular antivirus software which secure the user’s valuable data from external and internal threat. It provides cloud storage to the user so that they can store and access their document anywhere anytime. For the remote installation of AVG, it is very necessary that you use the PC’s local administrator’s account, and in domain network, you should use domain administrator account. It is essential that the account must have non-blank password due to security reasons. You can install this trusted antivirus through www.avg.com/retail download and install avg product key. Fix AVG Remote Admin Installation: 1.Check your Windows firewall settings: For this, you should know The DCOM port is TCP 135. And to open it, you have to click on the Start button, and then you have to click on Control Panel option. Now you have to double-click on Windows

2. Firewall, and then you have to click on the Exceptions tab. After this, you have to click on Add Port. Here in the Name box, you have to type DCOM_TCP135, and then you have to type 135 in the Port number box. Then you have to click on TCP, and then just click on OK button. At the end, you have to click on OK button. To open the port, you can type the command at a command prompt: netsh firewall add portopening protocol=tcp port=135 name=DCOM_TCP135 Remember, Windows 10 local administrator account is disabled by default. You have to enable it, if you want to perform the remote installation. 2.Check Administrator Rights: For this, you have to press the Windows-key. Now you have to open the Start menu. Here you have to type cmd and then you have to wait for sometime so that the results appear. Now you have to right-click on the Command Prompt result and then you have to select Run as administrator from the context menu. If you want to activate the disabled administrator account, then you have to type the command at a command prompt: net user administrator /active:yes As the administrator account is not password protected, but you should assign some password to it. For this, you have to type the command at a command prompt: net user administrator * and then hit the Enter key.

3. You have to type the desired password. Again you have to type it if it asks for confirmation. Now the Windows 10 is ready for remote AVG installation. 3.Enable Printer and File Sharing: For this, you have to go to Control Panel and then you have to select Network and Internet. After this, you have to choose Network and Sharing Center and then click on Change advanced sharing settings. Then you have to click on File Printer Sharing. Here you have to expand the network profile. Now under File and printer sharing, you have to select Turn on file and printer sharing. This method will help you to fix AVG Remote Admin Installation. If you are still facing any issues then you can visit to the site of AVG via avg.com/retail install and activate avg retail card. Visit website>>> http://www.avg-com-retail.support/ #www office com setup #www webroot com safe