1 / 1

Stability analysis of metallic nanowires: Interplay of Rayleigh and Peierls Instabilities

Stability analysis of metallic nanowires: Interplay of Rayleigh and Peierls Instabilities. Daniel Urban and Hermann Grabert. cond-mat/0307279. (b). (a). (a)Yanson et al. Nature 400 , p.144 (1999) (b) Scheer et al. Nature 394 , p.154 (1998). Ohnishi et al. Nature 395 , p.780 (1998).

flo
Download Presentation

Stability analysis of metallic nanowires: Interplay of Rayleigh and Peierls Instabilities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Stability analysis of metallic nanowires: Interplay of Rayleigh and Peierls Instabilities Daniel Urban and Hermann Grabert cond-mat/0307279 (b) (a) (a)Yanson et al. Nature 400, p.144 (1999) (b) Scheer et al. Nature 394, p.154 (1998) Ohnishi et al. Nature 395, p.780 (1998) Au nanowires: Kondo et al. Phys. Rev. Lett 79, p.3455 (1997) Kondo et al. Science 289, p.606 (2000) Images of gold nanowires show approx. cylindrical geometries with certain “magic” radii Conductance measurements for Au in a STM-setup, showing four different contacts at T=4.2K. Untied et al. Phys. Rev. B 56, p. 2154 (1996) Histogram of conductance values, measured for Potassium at T=4.2K with an MCBJ-device. Yanson, PhD thesis, Universiteit Leiden (2001) Conductance histogram for STM gold nanowires at T=4.2K. Inset: typical conductance vs. time staircase. Costa-Krämer et al. Phys. Rev B 55, p.12910 (1997) Rayleigh instability: Peierls instability: • Known from quantum mechanics of 1d systems • Linear chains lower their energy by dimerization • Known from classical • continuum mechanics • Due to surface tension • For a length L > 2  R cylindrical leads perturbated cylindrical wire: R(z) cylindrical leads 2R0 L • Which cylindrical configurations are stable? • look at axisymmetric deformations • calculate scattering matrix in orders of  • calculate density of states • calculate grand canonical potential • cylindrical wire with radius R0 is stable if and for arbitrary deformations • is called stability coefficient stability criterion:  > 0 for all q Matching the wave functions on the boundaries determines the S-matrix that describes the perturbated wire. Fabrication: • 3D metallic nanowires can be produced by • Scanning tunneling microscopy (STM) • Mechanically controllable break junctions (MCBJ) • Electron-beam irradiation of thin metal films 1m Conductance quantization: ??? ??? Why are these wires stable at all? Jellium model: Results: Stability analysis: • Free electron gas confined by a hard wall • potential (given by the wire geometry) • Ions = incompressible jellium background • Open system, electron reservoirs at both ends • Volume conservation constraint • This model requires: • Strong delocalisation of the valence electrons • Good screening • Nearly spherical Fermi surface • Conditions satisfied for s-orbital metals like • the alkali metals and partially gold Stability diagrams: (a) (b) (a) (b) • Stability diagram for a cylindrical wire of length LkF=1000 at three different temperatures. Red areas are unstable (<0) at T=0.05TF, the solid and the dotted lines show the contours of the unstable regions for T=0.01TF and T=0.005TF respectively. The dashed blue line shows the criterion for the Rayleigh instability (qR0 = 1). • Extent of the regions of instability as a function of temperature • Stability diagram for a cylindrical wire of length LkF=1000 at zero temperature. Red areas are unstable (<0). The dashed blue line shows the criterion for the Rayleigh instability (qR0=1), the dotted lines show the criterion for the Peierls instability (q = 2kF() ). • Extent of the regions of instability as a function of wire length

More Related