1 / 39

Chapter 6

Chapter 6. Costs. Table of Contents. 6.1 The Nature of Costs 6.2 Short-Run Costs 6.3 Long-Run Costs 6.4 The Learning Curve 6.5 Costs of Producing Multiple Goods. Introduction. Managerial Problem

drushing
Download Presentation

Chapter 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6 Costs

  2. Table of Contents • 6.1 The Nature of Costs • 6.2 Short-Run Costs • 6.3 Long-Run Costs • 6.4 The Learning Curve • 6.5 Costs of Producing Multiple Goods

  3. Introduction • Managerial Problem • Technology choice at home versus abroad: In the United States, firms use relatively capital-intensive technology • Will that same technology be cost minimizing if they move their production abroad? • Solution Approach • First, a firm must determine which production processes are technically efficient so that it can produce the desired level of output without waste. Second, a firm should pick from these technically efficient processes the one that is also economically efficient (minimum cost). By minimizing costs, a firm can increase its profit. • Empirical Methods • When considering costs, a good manager includes opportunity costs or foregone alternatives. • To minimize costs, a manager should distinguish short-run costs from long-run costs. • Firms may reduce costs overtime based on experience or its learning curve. • If a firm produces several goods, individual cost may depend on the cost of producing multiple goods.

  4. 6.1 The Nature of Costs • Explicit and Implicit Costs • Explicit costs are direct, out-of-pocket payments for labor, capital, energy, and materials. • Implicit costs reflect only a foregone opportunity rather than explicit, current expenditure. • Opportunity Costs • The opportunity cost of a resource is the value of the best alternative use of that resource. • Value of Manager’s Time example: Maoyong owns and manages a firm. He pays himself only $1k per month but could work for another firm and make $11k per month. Working for another firm is the best alternative use of his time, so his opportunity cost of time is $11k. • Relevance of Considering Opportunity Cost • Maoyong example: Assume monthly revenue is $49k and explicit costs are $40k, including Maoyong’s monthly wage. The accounting profit is $9k and Maoyong collects $10k per month (profit + wage). However, his opportunity cost is $11k. So, he incurs an economic loss of $1k.

  5. 6.1 The Nature of Costs • Costs of Durable Inputs • Durable inputs are usable for a long period, perhaps for many years. • Capital such as land, buildings, or equipment are durable inputs. • Costs of Durable Inputs (truck example) • There are two problems. First, how to allocate the initial purchase cost over time. Second, what to do if the value of the capital changes over time. • Solution if there is a rental market: The accountant may expense the truck’s purchase price or may amortize it over the life of the truck, following IRS rules. The firm’s opportunity cost of using the truck is the amount that the firm would earn if it rented the truck to others. • Solution if there is no rental market: The opportunity cost of capital of using the truck a year would be the interest forgone in a year.

  6. 6.1 The Nature of Costs • Sunk Costs • Sunk cost is a past expenditure that cannot be recovered. • If an expenditure is sunk, it is not an opportunity cost. So we should not consider it for managerial decisions. • However, sunk costs appear in financial accounts. • Managers Should Ignore Sunk Costs • A firm paid $300k for a parcel of land but the market value is now $200k. If the firm builds a plant on this land, the value for the firm becomes $240k. • Is it worth carrying out production on this land or should the land be sold for its market value of $200k? • The land’s opportunity cost is $200k and the market value loss of $100k is a sunk cost. The sunk cost cannot be recovered and should not be considered in the decision. The values to compare are $240 versus $200. Certainly, the firm should carry out production on this land.

  7. 6.2 Short-Run Costs Common Measures of Cost • Fixed Cost (F)does not vary with the level of output; includes expenditures on land, office space, production facilities, and other overhead expenses; are often sunk costs, but not always. • Variable Cost(VC) changes as the quantity of output changes; refers to the costs of variable inputs. • Total Cost (C) is the sum of fixed and variable costs. • F and VC should be based on inputs’ opportunity costs.

  8. 6.2 Short-Run Costs • Average Fixed Cost (AFC)falls as output rises because the fixed cost is spread over more units. • Average Variable Cost (AVC) or variable cost per unit of output may either increase or decrease as output rises. • Average Cost (AC) or average total cost may either increase or decrease as output rises.

  9. 6.2 Short-Run Costs • Marginal Cost: MC = ΔC/Δq • Marginal cost (MC) is the amount by which a firm’s cost changes if the firm produces one more unit of output; ∆C is the change in cost when the change in output, ∆q, is 1 unit. • Marginal Cost: MC = ΔVC/Δq • Marginal cost also equals the change in variable cost from a one-unit increase in output. • Marginal Cost using Calculus: MC = dC/dq = dVC/dq • Marginal cost is the rate of change of cost as we make an infinitesimally small change in output. MC=dVC/dq because dF/q=0.

  10. 6.2 Short-Run Costs • Cost Curves: Total Values • Panel a of Figure 6.1 shows the variable cost (VC), fixed cost (F), and total cost (C) curves that correspond to Table 6.1 • Graphs: Total, Variable and Fixed Costs • The fixed cost curve, F, is a horizontal line at $48. • The variable cost curve, VC, is zero at zero units of output and rises with output. • The total cost curve, C, is the vertical sum of the VC and F curves, so it is $48 higher than the VC curve at every output level. VC and C curves are parallel.

  11. 6.2 Short-Run Costs Figure 6.1 Cost Curves

  12. Table 6.1 How Cost Varies with Output

  13. 6.2 Short-Run Costs • Cost Curves: Average and Marginal Values • Panel b of Figure 6.1 shows the average fixed cost, average variable cost, average cost, and marginal cost curves. • Graphs: Average Costs and Marginal Cost • The marginal cost curve, MC, cuts the average variable cost, AVC, and average cost, AC, curves at their minimums. • The height of the AC curve at point a equals the slope of the line from the origin to the cost curve at A. • The height of the AVC at b equals the slope of the line from the origin to the variable cost curve at B. • The height of the marginal cost is the slope of either the C or VC curve at that quantity.

  14. In the short run, the firm increases output by using more labor. However, each extra worker increases output by a smaller amount. Diminishing marginal returns to labor determine the shape of the production function. The production function determines the shape of the variable cost curve. As output increases, variable cost increases more than proportionally because of diminishing marginal returns. The production function determines the shape of the marginal cost, average variable cost, and average cost curves. 6.2 Short-Run Costs Production Functions and the Shapes of Short-Run Costs Curves

  15. 6.2 Short-Run Costs • Production Functions & Shapes of Cost Curves: Graph Analysis • If input prices are constant, the firm’s production function determines the shape of the variable cost curve. • The Variable Cost Curve • The VC and the total product curve have the same shape, Figure 6.2. • The total product curve uses the horizontal axis measuring hours of work. • The variable cost curve uses the horizontal axis measuring labor cost: VC = wL. • The VC of 6 units of output is $240 ($10*24).

  16. 6.2 Short-Run Costs Figure 6.2 Variable Cost and Total Product

  17. MC = ∆VC/∆q 6.2 Short-Run Costs The Marginal Cost Curve • In the short run, capital is fixed. So, the change in variable cost as output increases by one unit, MC, is the change in the cost of labor. • The marginal cost equals the wage times the extra labor necessary to produce one more unit of output. • Marginal cost is the change in variable cost as output increases by one unit. • Diminishing marginal returns determine the shape of the marginal cost curve. • The marginal cost curve is U-shaped. ∆VC/∆q = w(∆L/∆q) • Remember MPL = Δq/ΔL • So, ΔL/Δq is just the inverse of MPL. • Marginal cost equals wage divided by marginal product of labor. • Marginal product of labor and marginal cost move in opposite directions as output changes. MC = w/MPL

  18. AVC = VC/q 6.2 Short-Run Costs The Average Cost Curve VC/q = wL/q • Average variable cost is the variable cost divided by output. • Diminishing marginal returns to labor also determine the shape of the average variable cost curve. • The average variable cost curve is U-shaped. • The average cost curve is also U-shaped. • In the short run, capital is fixed. So the variable cost is wL. • The average variable cost is wL divided by output. • Remember APL = q/L • So, L/q is just the inverse of APL. • Average variable cost equals wage divided by average product of labor. • Average product of labor and average variable cost move in opposite directions. AVC = w/APL

  19. 6.2 Short Run Costs • Short-Run Cost Summary • In the short run, the cost associated with fixed inputs is fixed, while the cost from inputs that can be adjusted is variable. • Given that input prices are constant, the shapes of the variable cost and the cost-per-unit curves are determined by the production function. • Where there are diminishing marginal returns, the variable cost and cost curves become relatively steep as output increases, so the average cost, average variable cost, and marginal cost curves rise with output. • The average cost and average variable cost curves fall when marginal cost is below them and rise when marginal cost is above them, so the marginal cost cuts both these average cost curves at their minimum points.

  20. 6.3 Long Run Costs • Input Choice • In the long run, the firm adjusts all its inputs so that its cost of production is as low as possible. • The firm can change its plant size, design, build new machines, and otherwise adjust inputs that were fixed in the short run. • Technically and Economically Efficient • From among the technically efficient combinations of inputs that can be used to produce a given level of output, a firm wants to choose that bundle of inputs with the lowest cost of production, which is the economically efficient combination of inputs. • To do so, the firm combines information about technology from the isoquant with information about the cost of production.

  21. 6.3 Long Run Costs • An isocost represents all the combinations of inputs that have the same (iso-) total cost. • In Figure 6.3, the $200 isocost line represents all the combinations of labor and capital that the firm can buy for $200. • Properties of Isocosts • The points at which the isocost lines hit the capital and labor axes depends on the firm’s cost, and on the input prices. • Isocost lines that are farther from the origin have higher costs than those closer to the origin. • The slope of each isocost line is the same: ∆K/∆L = –w/r, the rate at which the firm can trade capital for labor in input markets

  22. 6.3 Long Run Costs Figure 6.3 A Family of Isocost Lines

  23. 6.3 Long Run Costs • Isocost and Isoquant Combined • The firm minimizes its cost by using the combination of inputs on the isoquant that is on the lowest isocost line that touches the isoquant. • Isocost and Isoquant Combined: Graph Analysis • In Figure 6.4, the lowest possible isoquant that will allow the beer manufacturer to produce 100 units of output is tangent to the $2,000 isocost line. • At x, the bundle of inputs are L = 50 workers and K = 100 units of capital. • At x, the isocost is tangent to the isoquant, so the slope of the isocost, –w/r = –3, equals the slope of the isoquant, which is the negative of the marginal rate of technical substitution. • Notice, y and z also produce 100 units of output but at a cost of $3,000. The x input combination is economically efficient.

  24. 6.3 Long Run Costs Figure 6.4 Cost Minimization

  25. The Lowest Isocost Rule The firm minimizes its cost by using the combination of inputs on the isoquant that is on the lowest isocost line that touches the isoquant. The Tangency Rule: MRTS = - w/r At the minimum-cost bundle, x, the isoquant is tangent to the isocost line. The slope of the isoquant (MRTS) and the slope of the isocost are equal. The Last-Dollar Rule: (MPL/w) = (MPK/r) Cost is minimized if inputs are chosen so that the last dollar spent on labor adds as much extra output as the last dollar spent on capital. Thus, spending one more dollar on labor at x gets the firm as much extra output as spending the same amount on capital. 6.3 Long Run Costs Three Equivalent Rules to Minimize Costs in the Long-Run

  26. 6.3 Long Run Costs • Factor Price Changes • How should the firm change its behavior if the cost of one of the factors changes? • If one factor becomes relatively cheaper, the firm should substitute factors considering the slopes of the isoquant and isocost curves. • Factor Price Changes: Graph Analysis • In Figure 6.5, the initial wage = $24 and the rental rate of capital = $8. The lowest isocost line ($2,000) is tangent to the q = 100 isoquant at x(L = 50, K = 100). • When the wage falls from $24 to $8, the isocost lines become flatter: Labor is relatively less expensive than capital now. • The slope of the isocost lines falls from –w/r = –24/8 = –3 to –8/8 = –1. • The new lowest isocost line ($1,032) is tangent at v (L = 77, K = 52). • Thus, when the wage falls, the firm uses more labor and less capital to produce a given level of output, and the cost of production falls from $2,000 to $1,032.

  27. 6.3 Long Run Costs Figure 6.5 Effect of a Change in Factor Price

  28. In the long run, returns to scale determine the shape of the production function, and the production function, in turn, determines the shape of the AC curve and other cost curves. If a production function has increasing returns to scale at low levels of output, constant returns to scale at intermediate levels of output, and decreasing returns to scale at high levels of output, the LRAC curve must be U-shaped. LRAC curves can have many different shapes depending whether the production process has economies or diseconomies of scale. Perfectly competitive firms typically have U-shaped AC curves. Noncompetitive markets may be U-shaped, L-shaped, everywhere downward sloping, everywhere upward sloping or have other shapes. 6.3 Long-Run Costs Production Functions and the Shapes of Long-Run Costs Curves

  29. 6.3 Long Run Costs • LRAC as the Envelope of SRAC Curves • The long-run average cost is always equal to or below the short-run average cost. Any input combination in the short run is also available in the long run. However, changing capital levels to reduce costs are only available in the long run. • In the long run, the firm chooses the plant size that minimizes its cost of production, so it picks the plant size that has the lowest average cost for each possible output level. • LRAC as the Envelope of SRAC Curves: Graph Analysis • At q1, in Figure 6.7, the firm opts for the small plant size, whereas at q2, it uses the medium plant size. • If there are only three possible plant sizes, with short-run average costs SRAC1, SRAC2, and SRAC3, the long-run average cost curve is the solid, scalloped portion of the three short-run curves (envelope curve). • LRAC is the smooth and U-shaped long-run average cost curve.

  30. 6.3 Long Run Costs Figure 6.7 Long-Run Average Cost as the Envelope of Short-Run Average Cost Curves

  31. 6.4 The Learning Curve • Learning by Doing • Learning by doing refers to the productive skills and knowledge that workers and managers gain from experience. • Workers add speed with practice. Managers learn how to organize production more efficiently, assign tasks based on worker’s skills, and reduce inventory costs. Engineers optimize product designs with experimentation. • For these and other reasons, the average cost of production tends to fall over time, and the effect is particularly strong with new products. • Learning Curve and Costs • The learning curve is the relationship between average costs and cumulative output. • Thecumulative output is the total number of units of output produced since the product was introduced. • If a firm is operating in the economies of scale section of its average cost curve, expanding output lowers its cost for two reasons. Its average cost falls today because of economies of scale, and also because of learning by doing.

  32. 6.5 Costs of Producing Multiple Goods • Joint Production is Less Costly • If a firm produces two or more goods that are linked by a single input, the cost of one good may depend on the output level of another. For example, cattle provide beef and hides. • A firm enjoys economies of scope if it is less expensive to produce goods jointly than separately. • It is less expensive to produce beef and hides together than separately, so there are economies of scope. • Economies of Scope: SC = [C(q1,0) + C(0,q2) - C(q1, q2)]/C(q1, q2) • C(q1, 0) is the cost of producing q1 of the first good, C(0, q2) is the cost of producing q2 of the second good, and C(q1, q2) is the cost of producing both goods together. • If SC is zero, the cost of producing the two goods separately, C(q1,0) + C(0,q2), is the same as producing them together, C(q1, q2). There are no economies of scope. • If SC is positive, it is less expensive to produce goods jointly than separately. There are economies of scope. • If SC is negative, there are diseconomies of scope, and the two goods should be produced separately.

  33. Managerial Solution • Managerial Problem • Technology choice at home versus abroad: In the United States, firms use a relatively capital-intensive technology • Will that same technology be cost minimizing if they move their production abroad? • Solution • The answer depends on relative factor prices and whether the firm’s isoquant is smooth. • If the isoquant is smooth, even a slight difference in relative factor prices will induce the firm to shift along the isoquant and use a different technology with a different capital-labor ratio. • If the isoquant has kinks, the firm will use a different technology only if the relative factor prices differ substantially.

  34. Table 6.2 Bundles of Labor and Capital That Cost the Firm $200

  35. Figure 6.6 Long-Run Cost Curves

  36. Table 6.3 Returns to Scale and Long-Run Costs

  37. Table 6.4 Shape of Average Cost Curves in Canadian Manufacturing

  38. Figure 6.8 Learning by Doing

  39. Figure 6.9 Technology Choice

More Related