1 / 23

Duct Testing Quickie Set-Up Guide

Duct Testing Quickie Set-Up Guide. RetroTec Blower Door Duct Tester DM-2 Meter. Color Coded Connections . Retrotec DM-2 will work with all of these devices. Input B Ref B Ref A Input A. Program your DM2 for Duct Tester (or Blower Door). Turn Manometer ON Press On/Off button

dionne
Download Presentation

Duct Testing Quickie Set-Up Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Duct Testing • Quickie Set-Up Guide

  2. RetroTecBlower DoorDuct TesterDM-2 Meter

  3. Color Coded Connections

  4. Retrotec DM-2 will work with all of these devices

  5. Input B Ref B Ref A Input A

  6. Program your DM2 forDuct Tester (or Blower Door) Turn Manometer ON PressOn/Off button PressExitbutton Set Up Manometer Press Setup button Arrow up or down to Device Setup, then press Enter Enable/disable Devices Highlight with up down arrows, right arrow clicks yes/no Du 200 and/or 1000 can eliminate duct tester DU 200 for a dedicated blower door meter can eliminate blower door 1000 for a dedicated duct test meter HitEXITonce set up Scroll and select Mode Set Up press Enter Enable/Disable different tests Flow cfm @ 50 Pa should be active: to change scroll to test pressure then press Enter.Change to desired pressure, then press Enteragain. For Duct Tester change to 25 pa Exit, Exit to get to the main screen

  7. N = .60 ( located in Setup ) Time = 1 second ( toggle Time Avgbutton) Zero = On ( toggle Auto Zero button)

  8. Meter always wants to go back to default screen, always just press Exit to return to previous screen • You can change the Full Screen Timeout duration by pressing Setupand scroll down to Full Screen Timeout (15 seconds is a good start)

  9. Check Devices Enabled • Toggle Device to see what is enabled • Should display only the devices you want to use • For Duct Test • Press Setup • Arrow up/down to Device Setup • Press Enter • Highlight Du 200 and click YES with right arrow • Press Exit • Select Mode Set UP • Press Enter • Set to 25 Pascals • Press Range/Config to select the plate install on fan • Hint: to start your tests with a good guess at the correct Plate • use the “Mid” plate

  10. Duct Testing Enable the flow @ 25pa for Total Leakage duct test Turn Offthe @25 when doing Leakage to Exterior Click@Pressure button to turn this function on and off

  11. Retrotec Duct TestSet up for Duct TestPress ONPress Exit (to continue)Pressure and Flow @ 25Set Pressure (to 25 Pascals)Punch Buttons 2 and 5Press EnterPress Exit Twice (to Stop Test)

  12. Makes your meter much easier to use Yes for Duct Tester NOfor Blower Door

  13. Press Mode • Shows two channels A&B • Toggle through Mode again to look at fields: • Channels A & B • Pressure / Flow • Air Changes/Hour + volume ft3 • Press @Pressure to get meter to convert and display CFM @25 for Ducts • Reminder: Use actual 25 Pascal for Leakage to Exterior Test (Do Not use the @25 setting)

  14. Automatic Run Recommended Once equipment is set up and meter settings are correct, it is recommended to run the fan speed through manometer PressSet Pressure Duct Tester: Set to @25 Pa Press Enter The fan will respond automatically Be prepared!

  15. Retrotec Duct TesterPlease confirm contents: Meter Case DM-2 Meter Power Supply/Charger “Umbilical” Cord Useful Forms + Handouts Manual

  16. Retrotec Duct TesterPlease confirm contents: Large Case Fan + Duct Plates Low Mid Power Cord Tubing:Red, Green, Blue (and extras) Static Pressure Tap Bungee Cords Tube Fittings Duct Mask / Masking Tape

  17. On-Site Equipment List • Smoke Tube • TEC Exhaust Flow Meter • Pressure Pan • Foam Blocks • Flashlight / Headlight • Cordless Drill + Bits + Extra Battery • Screw Drivers • Vise Grips/Wrench • “Duct” Tape • Leatherman/Knife + Cardboard • Ladder / Stool • Calculator + Camera • Booties + Tyvek Suit • Trash Bags + Paper Towels

More Related