1 / 6

KEK Test Beam Phase II Plan

KEK Test Beam Phase II Plan. Makoto Yoshida (Osaka Univ.) MICE FT workshop @ Daresbury 2005/8/30. Layout of T585. Step 1. High momentum parallel beam without magnetic field Check light yield 3HF dependence 2500 ppm / 5000 ppm on the 4 th station Angle dependence

Download Presentation

KEK Test Beam Phase II Plan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. KEK Test BeamPhase II Plan Makoto Yoshida (Osaka Univ.) MICE FT workshop @ Daresbury 2005/8/30

  2. Layout of T585

  3. Step 1 • High momentum parallel beam without magnetic field • Check light yield • 3HF dependence • 2500 ppm / 5000 ppm on the 4th station • Angle dependence • Dead channel (efficiency) • Cross talk between fibers / views • Position alignment • Station alignment • fiber alignment on station • High speed DAQ ~1kHz is necessary

  4. Step 2 • With solenoid magnetic field • Study tracking performance • Defocused beam in f30cm • Low momentum beam 0.2 – 0.6 GeV/c • Select muons by TOF/ACC • Measure muon momentum by TOF • sT1=50ps, shodoscope=60ps  sTOF=66ps • 300 MeV/c  dp/p = 1.7% • 400 MeV/c  dp/p = 2.8% • Difficulties • decay in flight • path length on spiral track in magnetic field • energy loss

  5. Preparation works • TOF • Establish calibration / online monitoring scheme • Improve support structure for easy manipulation • ACC • Establish calibration with LED • gain monitoring in beam time • DAQ • temperature monitor logging • AFE slow control • Quick VLSB readout

  6. Time line • July, 2005 • KEK-PS T585 has been approved for 1 week beam time (20 shifts) at KEK-PS p2 beam line • Aug. 24th • Start to prepare VLPC Cryostat in p2 experimental area • Successful operation of Cryocooler • Reach 7K • Sep. 1st • Infrastructure in p2 area • Stable operation of Cryostat • Sep. 5th • Slow control by Linux • AFE initialization • Temperature control • VLSB readout in UniDAQ framework • Around Sep. 12th • Cosmic-ray test • establish trigger scheme • test DAQ system • Around Sep. 21th • Place solenoid magnet • Move Cryostat beside solenoid • Sep. 27th– Sep. 30th • Accelerator tuning • Sep. 30th • Start physics run • Could be delayed to Oct. 3rd, if accelerator needs more tuning

More Related