1 / 24

Welding, Cutting and Brazing 29 CFR 1910, Subpart Q

Welding, Cutting and Brazing 29 CFR 1910, Subpart Q. Compressed Gases. Covered in Subpart H, but an integral part of welding, cutting, and brazing Compressed gas hazards Gases used for cutting, brazing, and “shielding” the weld. Cylinder Inspection.

devin
Download Presentation

Welding, Cutting and Brazing 29 CFR 1910, Subpart Q

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Welding, Cutting and Brazing 29 CFR 1910, Subpart Q

  2. Compressed Gases • Covered in Subpart H, but an integral part of welding, cutting, and brazing • Compressed gas hazards • Gases used for cutting, brazing, and “shielding” the weld

  3. Cylinder Inspection Most compressed gas cylinders must be periodically tested/recertified (DOT) All cylinders contain markings/symbols that indicate certification status

  4. Specific Gases • Several of the gases have specific OSHA standards • These gases include acetylene, hydrogen, oxygen, nitrous oxide, ammonia, and LPG

  5. Basic Fire Prevention • Fire hazards must be removed, or • Guards installed, or • Welding/cutting must NOT take place • Hot work permit should be used to ensure that all fire hazards are controlled • Use of fire watch • 1/2 hour after operation ceases

  6. Fire Prevention (cont.) Fire extinguishers must be charged/available Neverweldin the presence of explosive atmospheres Do not weld on used drums, barrels, tanks, or other containers Test potentially explosive containers for flammable atmospheres Shut off cylinder valves when they are not in use

  7. Protection of Personnel • Keep working surfaces clean and unobstructed • Wear eye protection • Use safety glasses under welding hood • Protective clothing must be used per 1910.132 • Welding in confined spaces • Machines located outside of space • Other confined space precautions apply (1910.146)

  8. Oxygen-Fuel Welding • 29 CFR 1910.253 • Acetylene • Flammable • Unstable • Cannot be piped above 15 psi

  9. Basic Rules for Oxyacetylene Welding • Blow out cylinder valve • Release regulator • Stand to one side of regulator • Open cylinder valve slowly • Not more than 15 psi

  10. Basic Rules (cont.) • Purge oxygen and acetylene passages • Light the acetylene • Never use oil or grease • Do not use oxygen • Keep your work area clean

  11. Storage of Fuel Cylinders • Storage area must be well ventilated • Cylinders must be at least 20 feet from combustibles • Valves must be closed • Valve protection must be in place • Inside storage must be limited to 2,000 cubic feet. • Cylinders must be stored in upright position • Oxygen must be at least 20 feet from fuel gas or 5 feet with a 1/2 hour fire barrier

  12. Gas Cylinder Precautions • Never lift cylinders by the service valve or valve protection (use slings, net, etc.) • Keys, handles, hand wheels must be present • Use proper regulator • Open acetylene valve no more than 11/2 turns

  13. Protective Devices • Pressure relief valves • Backflow preventers • Fuel gas hose—red (sometimes black) • Oxygen hose—green • Hose protection required • Pressure-reducing regulators

  14. Arc Welding Electric current fuses parent metal and welding rod Indispensable in metal working Used for carbon and alloy steels and non-ferrous metals

  15. Shielding • Air must be kept away from weld area • Shielding protects the integrity of the weld joint • Flux or gas mixture is used as a “shield”

  16. Common Arc Welding Processes • Shielded metal arc welding (stick welding) • Gas metal arc welding (MIG welding) • Gas tungsten arc welding (TIG welding) • Flux cored arc welding • Submerged arc welding • Arc cutting • Plasma arc cutting

  17. Installation and Maintenance • Welding machine must be grounded • Work area must be dry and free of hazards • Connections must be tightly made • Splices within 10 feet of holder are prohibited • Cables must be maintained and conductors well insulated

  18. Welding Health Hazards • Zinc • Cadmium • Beryllium • Iron Oxide • Mercury • Lead • Fluorides • Chlorinated hydrocarbon solvents • Phosgene • Carbon monoxide • Ozone • Nitrogen Oxides 11006115 Copyright ã1999 Business & Legal Reports, Inc.

  19. Welding Physical Hazards • Ultraviolet radiation • Infrared radiation • Intense visible light

  20. Lens Shades for Typical Welding Lens Shade Number 10-14 11-12 12 3 or 4 4-8 Welding Process Shielded metal arc Gas metal arc Gas Tungsten arc Torch brazing Gas welding

  21. Quiz 1. Fuel cylinders must be stored at least _____ feet from combustibles. 2. Shielding is a process used to protect the eyes from welding fume. True or False 3. Three physical welding hazards are ____________ radiation, infrared radiation and intense visible light. 4. You should not use oxygen as a substitute for air. True or False 5. As long as they are secure, fuel cylinders can be stored on their side. True or False

  22. Quiz (cont.) 6. Gas Metal Arc Welding is also known as _____________ welding. 7. Exposure to zinc fumes may cause metal fume fever. True or False 8. Cylinder inspection requirements are regulated by the Department of ____________________. 9. Acetylene has a very narrow flammable range. True or False 10. Backflow prevention should be provided for oxygen cylinders. True or False

  23. Quiz Answers 1. Fuel cylinders must be stored at least 20 feet from combustibles. 2. False. Shielding is a process used to keep air away from the weld. 3. Three physical welding hazards are ultraviolet radiation, infrared radiation, and intense visible light. 4. True. You should not use oxygen as a substitute for air. 5. False. Fuel cylinders must always be stored upright. 6. Gas Metal Arc Welding is also known as MIG welding.

  24. Quiz Answers (cont.) 7. True. Exposure to zinc fumes may cause metal fume fever. 8. Cylinder inspection requirements are regulated by the Department of Transportation. 9. False. Acetylene has a very wide flammable range. 10. True. Backflow prevention should be provided for all oxygen cylinders.

More Related