1 / 17

Risk in Well Plugging & Abandonment by Twachtman Snyder & Byrd, Inc. September 2006

Risk in Well Plugging & Abandonment by Twachtman Snyder & Byrd, Inc. September 2006. Twachtman Snyder & Byrd, Inc. Houston, Texas, based company founded in 1987. Provides project management, well P&A and contracting services to the oil and gas industry.

coye
Download Presentation

Risk in Well Plugging & Abandonment by Twachtman Snyder & Byrd, Inc. September 2006

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Risk in Well Plugging & Abandonmentby Twachtman Snyder & Byrd, Inc.September 2006

  2. Twachtman Snyder & Byrd, Inc. • Houston, Texas, based company founded in 1987. • Provides project management, well P&A and contracting services to the oil and gas industry. • Specialized in decommissioning of offshore facilities. • Consulting services for decommissioning planning and liability assessment.

  3. Robert C. Byrd Over 30 Years in the Offshore Industry • Joined TSB in 1993 • Responsible for Risk and Liability Consulting Services • Educational Background: • B.Sc. Marine Engineering, US Coast Guard Academy • M.Sc. Ocean Engineering, Unv. of Alaska, Fairbanks • M.Sc. Structural Engineering, Unv. of California, Berkeley • Ph.D. Engineering, Unv. of California, Berkeley

  4. Well Plugging & AbandonmentSummary

  5. WELL PLUGGING & ABANDONMENT • Rigless Method used predominantly in Gulf of Mexico & North Sea • Rig-based method used primarily on subsea wells

  6. Well P&A Objectives • Assure isolation of hydrocarbon zones • Protection of fresh water aquifers • Prevention of migration of fluids & gases

  7. General Well P&A Procedure • Cement plug is placed below and across the lowest production zone, tagged and tested. • Cement plugs across all production zones • All open annuli are plugged. • Tubing cut approximately -100 m below the mud line (BML) and the tree is removed. • Production casing removed to -100 m BML. • Surface cement plug is pumped into the casing with top at -32 m BML.

  8. Well P&A - Rig vs. Rigless Step 1 Typical Wellbore Schematic

  9. Well P&A - Rig vs. Rigless Step 2 Bottom Plugs Set With Tubing Pulled Out of Hole

  10. Well P&A - Rig vs. Rigless Step 3 Balanced Plug on Rigless and Stopped Plug With the Rig

  11. Well P&A - Rig vs. Rigless Step 4 Rigless with Cut Casing and CIBP; Rig with Same but with a little more Casing Out of the Hole

  12. Performance Risk Issues in Well P&A • Time lapse between well completion and P&A • Deterioration of hardware • Loss of, incomplete or inaccurate records • Often performed long after platforms shut-in • P&A personnel often know little about the wells • Cost pressure: Not income generating

  13. Risk Mitigation Factors in Well P&A • Formations generally produced out, therefore pressures not high. • Systems and tools are available to deal with any eventuality.

  14. Well P&A Cost Risk Example

  15. Drilling Rig Production Equipment Deck Quarters Power Generation Jacket Pipeline Piles Conductors/Wells OffshorePlatform Components

  16. Other Risk Issues in Well P&A

  17. Risk in Well P&A • Conclusions • The performance risk in well P&A is primarily economic: It is very difficult to estimate the cost accurately for a single well. • We can estimate the cost of multiple wells probabilistically. • These Risks Pale in comparison with the uncertainty following a Catastrophic Event (Hurricane).

More Related