1 / 10

Implementation of a phased array antenna for the 2.45 GHz ISM band

Implementation of a phased array antenna for the 2.45 GHz ISM band. Presented By: Alejandro Fuentes 260725 Ricardo Pérez 260769. Undergrad thesis. National university of Colombia GMUN - CMUN group 2008. Conrad project and our project logos. http://gmun.unal.edu.co/cmun.

brock
Download Presentation

Implementation of a phased array antenna for the 2.45 GHz ISM band

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Implementation of a phased array antenna for the 2.45 GHz ISM band Presented By: Alejandro Fuentes 260725 Ricardo Pérez 260769 Undergrad thesis National university of Colombia GMUN - CMUN group 2008 Conrad project and our project logos. http://gmun.unal.edu.co/cmun

  2. HIGH FRECUENCY CIRCUIT MATERIALS PROPERTIES UNAL 2008  Page 2

  3. Materials properties Definitions Dielectric constant • Ratio of permittivity of a substance to permittivity of free space. • Ratio of capacitance between a system using a dielectric insulator versus using a vacuum. Dissipation factor (loss tangent) • Loss in insulator. • Ratio of energy loss in dielectric to energy stored in it per cycle. Source: [1] UNAL 2008  Page 3

  4. Materials properties Considerations • εr changes wavelength and characteristic impedance. • High tolerance in εr cause unwanted reflections. • Dissipation factor must be low to avoid heat and adding extra items. Source: [1] UNAL 2008  Page 4

  5. Materials properties Definitions Insulation resistance • Ability to resist the flow of current through the material. • Surface and volume resistivity. Dielectric strength • Voltage gradient an insulating material can resist before dielectric breakdown occurs. Dielectric breakdown : failure of insulating material to resist current flow. UNAL 2008  Page 5

  6. Materials properties Considerations • Resistivity affects electrical performance of signal. • High values of resistivity ensure there is no leakage through dielectric. • Ensure the potential applied never reaches the dielectric strength value. • Thickness, frequency and environment affect dielectric strength. UNAL 2008  Page 6

  7. Materials properties Definitions Moisture absorption • The amount of moisture, in percentage, that a material will absorb under specified conditions. Peel strength • Measure of the strength of an adhesive bond. UNAL 2008  Page 7

  8. Materials properties Considerations • Moisture raise εr, this means that modifies wavelength and characteristic impedance. • Oxidation and thermal enviroment reduce bond strength. • Substrate must withstand respectives chemical processes. UNAL 2008  Page 8

  9. High Frequency laminates table (Rogers corporation) Source: [1] UNAL 2008  Page 9

  10. References • Literature about high frequency laminates. http://www.rogerscorp.com/acm/literature.aspx UNAL 2008  Page 10

More Related