1 / 3

VT 2000 Default Timers

VT 2000 Default Timers. The VT 2000 has 61 Default timers. 50 timers control equipment start/stop times. The rest control safeties, ultrasonics, etc. The key to proper timer adjustment is to first complete the 102 steps in the “Installation Start-Up & Test Procedure” document.

ashlyn
Download Presentation

VT 2000 Default Timers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VT 2000 Default Timers • The VT 2000 has 61 Default timers. • 50 timers control equipment start/stop times. • The rest control safeties, ultrasonics, etc. • The key to proper timer adjustment is to first complete the 102 steps in the “Installation Start-Up & Test Procedure” document.

  2. Start Stop Timer Setup • Measure distance from the measuring photoeye to the equipment in question. Divide this distance in inches by 8 to get the approximate start count time.

  3. VT 2000 Default Timers • All Start Stop Timers Must Be Individually Set. • D897 Top Brush Measured Distance. • D898 Ultrasonic Measured Distance. • D903 #1 Wraps Stop: Should Be Set To 8 After Rear Of Car. • D905 #2 Wraps Stop: Should Be Set To 8 After Rear Of Car. • D906, D907, D908: New Chemical Arch Registers. Simply Select 1 Of 8 Chemicals To Be Applied.

More Related