1 / 30

Modified 10-20 Set Up for Sleep Recordings

Modified 10-20 Set Up for Sleep Recordings. Jon W. Atkinson, BS, RPSGT. Goals. Provide: Historical perspective into 10-20 measurement Detailed measuring/marking procedure Tips to aid in success Demonstration. Historical perspective.

ann-medina
Download Presentation

Modified 10-20 Set Up for Sleep Recordings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modified 10-20 Set Upfor Sleep Recordings Jon W. Atkinson, BS, RPSGT

  2. Goals • Provide: • Historical perspective into 10-20 measurement • Detailed measuring/marking procedure • Tips to aid in success • Demonstration

  3. Historical perspective • Herbert Jasper, 1958. “Report of the committee on methods of clinical examination in electroencephalography: 1957” – described EEG placement based on anatomical landmarks • EEG was at the forefront of non-invasive neurodiagnosis • Provided consistent, replicable location of EEG electrodes and a standard nomenclature

  4. Historical perspective • Alan Rechtschaffen and Anthony Kales, 1968. “A Manual of Standardized Terminology, Techniques and Scoring System For Sleep Stages of Human Subjects” • Adopted C3,4 and O1,2 to contralateral ears in the scoring manual • A need for consistency and replication (largely for research purposed) … Sleep disorders per se was little considered at that time. • Based on “normal” subjects

  5. Historical perspective • Conrad Iber, et al,2007 The AASM Manual for the Scoring of Sleep and Associated Events: Rules, Terminology and Technical Specifications • Added F3, 4 to the standard electrode placements • Enhance the appearance of “qualifying” slow waves and K complexes • Problems • Many technicians/technologists were unfamiliar with the mechanics of F3,4 localization • Not well addressed in training programs or not followed through by students • Personal observation – proper localization of F3,4 was rare, even among RPSGT’s!!!

  6. Measuring and marking procedure

  7. Nasion 50% 50% Inion Anterior-Posterior Midsagittal Plane • Find landmarks nasion & inion; measure distance between the two being sure to keep the tape taut • Mark 50% of nasion-inion distance perpendicular to the tape

  8. Nasion 10% 20% 20% 10% Inion Completing the A-P measurement • Measure from nasion to inion • Mark 50% point (Cz) • Mark 20% forward from Cz (Fz) • Mark another 20% forward (Fpz). This leaves 10% to the nasion. • Mark 40% back from Cz (Oz). This leaves 10% to the inion. 40%

  9. A-P measurement Note position of ring finger and thumb as anchors for tape tautness 50% mark

  10. A-P measurement 20% forward from 50% mark Additional 20% forward, leaving 10% from nasion

  11. A-P measurement 40% back from 50% mark, 10% up from the inion indicated by the wax pencil

  12. Nasion L-PAN R-PAN 10% 10%% 20% 20% 20% 20% 50% 50% Inion Mid-coronal plane • Measure distance between L-PAN & R-PAN and mark 50% to complete CZ • Measure 20% down from Cz and mark for C3 and an additional 20% and mark T3 • Measure 20% down from Cz and mark for C4 and an additional 20% and mark T4

  13. Mid-coronal measurement Note again, anchoring of tape with thumb and ring finger or pinkie to pull the tape taut.

  14. Mid-coronal measurement 50% mark perpendicular to tape 20% down from 50% mark

  15. Mid-coronal measurement Additional 20% down, leaving 10% up from the R-PAN 50% mark (at the pencil) and 20% (C3) down and 20% down (T3)

  16. Nasion L-PAN R-PAN Inion Circumference • Eyeball the middle of the Fp plane by making a mark in the middle of the forehead sighting down to the nasal septum. (Fpz) • Measure the circumference from the Fpz through the T3 marking through the Oz plane through the T4 marking back to Fpz • Mark the base of the over the inferior frontal areas on each side.

  17. Circumference 10% • Measure and mark 50% of the circumference from Fpz to locate Oz • Mark 5% of the entire circumference on either side of Oz to locate O1 and O2 • Make a mark 5% on either side of FPz (FP1 & FP2) • Mark 10% of the circumference from FP1 and FP2 to localize F7 and F8 Nasion 10% 10% 5% 5% L-PAN R-PAN 5% 5% Inion 10%

  18. Circumference “Eyeballing” midline for the FPz mark Measuring the circumference through the 10% lines; I just mentioned the needle electrodes

  19. Circumference 50% of the circumference for Oz 5% marks on either side of Oz for O1 and O2

  20. Circumference 5% mark on either side of Fpz for Fp1 and Fp2 Additional 10% back from Fp2 on the 10% line for F8

  21. Marking Anterior Coronal Line • Measure from L Inferior Frontal (F7) line through Fz to R Inferior Frontal line (F8). • Mark 50% to finalize Fz • Mark 25% (half of the half) to create initial marks for F3 and F4 Nasion L-PAN R-PAN 25% 50% Inion

  22. Marking Anterior Coronal Line Measuring from F7 to F8 through FZ. Note anchoring and taut tape. 50% mark and then 25% (half of the half) for F3

  23. Nasion L-PAN R-PAN Inion Finalizing F3, F4, C3 and C4 • Measure from FP1 through F3 and C3 to O1 • Mark 50% to finalize C3 and 25% (half of the half) forward to finalize F3 • Measure from FP2 through F4 and C4 to O2 • Mark 50% to finalize C4 and 25% forward to finalize F4 25% 50%

  24. Finalizing F3, F4, C3 and C4 Measuring from Fp1to O1 through F3, C3. Note anchoring and taut tape. Marking 50% of the Fp1-O1 distance and then marking “half of the half” forward.

  25. Final product Antero-superior view. Note the mild bow from Fp’s to F’s to C’s .

  26. Localize M1 and M2. • Pull forward and outward on the pinna. • Most people have a little fold of skin about midway up on the ear where it attaches to the side of the head. • Locate the mastoid just superior to this fold. • Too high will produce higher amplitude EEG (alpha like) activity and contaminate your signal when used as a reference for the F’s, C’s and O’s • too low will produce muscle artifact from sterno-cleido-mastoideus

  27. Summary • A-P, mark Cz, Fz, Fp line and O line • Mid-coronal, mark Cz, C3 and C4, T3 and T4 • Circumference through the 10 percent line, mark Fp1 , Fp2, O1 and O2 • Anterior coronal, mark Fz, F3, F4 • Parasagittal, from Fp’s to O’s, mark C3 and C4, F3 and F4 • Localize mastoids for M1 and M2

  28. Tips • Keep the tape taut • Use ring finger or pinkie and thumb as anchors • Mark perpendicular to the tape • Remember to mark F7,8 when marking the circumference • Move the tape as few times as possible • Practice, Practice, Practice • Do it every time

  29. References • Jasper, H. "Report of the committee on methods of clinical examination in electroencephalography: 1957". Electroencephalography and Clinical Neurophysiology 10 (2): 370–375, Elsevier, 1958. • Iber, C; Ancoli-Israel, S; Chesson, A; Quan, SF. for the American Academy of Sleep Medicine. The AASM Manual for the Scoring of Sleep and Associated Events: Rules, Terminology and Technical Specifications. Westchester: American Academy of Sleep Medicine; 2007. • Rechtschaffen, A; Kales, A. A Manual of Standardized Terminology, Techniques and Scoring System For Sleep Stages of Human Subjects. US Dept of Health, Education, and Welfare; National Institutes of Health, 1968

More Related