An Overview of the PCR

1. An Overview of the PCR

2. “The polymerase chain reaction (or PCR) is a technique for the in vitroamplification of a desired sequence of DNA”

3. PCR allows the generation of a large quantity of DNA product from only a few starting copies. It has been shown that PCR can be used to generate a detectable quantity of DNA from only one starting target (or template) molecule.

4. PCR was developed in the mid-1980's, but has already found multiple applications, such as: • Rapid amplification of intact genes or gene fragments • Generation of large amounts of DNA for sequencing • Analysis of mutations for medical applications • Amplification of chromosomal regions adjacent to genes of known sequence And many more· Development of PCR won the Nobel prize for Kary Mullis and co-workers.

5. PCR…. • PCR allows the specific synthesis of a predetermined DNA region via the use of two small, specifically designed fragments of DNA (primers or oligonucleotides), • two termini nucleic acid molecule amplified. • PCR amplification reactions in general are highly specific, specificity being determined by the correct hybridisation of primer specific sequences to complementary sequences present on the target DNA molecule to be amplified

8. steps in PCR • There are three major steps in a PCR, which are repeated for 30 or 40 cycles. This is done on an automated cycler, which can heat and cool the tubes with the reaction mixture in a very short time. • Denaturation at 94°C :all enzymatic reactions stop (for example : the extension from a previous cycle). • Annealing at 54°C :Brownian motion. • Ionic bonds are constantly formed and broken • The more stable bonds …..on that little piece of double stranded DNA …. the polymerase can attach….starts copying the template. • extension at 72°C :ideal working temperature for the polymerase. • The primers……already have a stronger ionic attraction to the template than the forces breaking these attractions. • Primers that are on positions with no exact match, get loose again • The bases (complementary to the template) are coupled to the primer on the 3' side

10. PCR theory “The PCR reaction is a DNA synthesis reaction that depends on the extension of primers annealed to opposite strands of a dsDNA template that has been denatured (melted apart) at temperatures near boiling. By repeating the melting, annealingandextension steps, several copies of the original template DNA can be generated”

11. Brief Overview of PCR Requirements

12. PCR Reaction Mix • Target DNA • specifically primers • Deoxyribonucleotide triphosphates • magnesium ions • Thermostable DNA polymerase (Thermus thermophilus, T. flavus, T. litoralis, T. brokianus) • water. • RT (Avian Myeloblastoma Virus (AMV) and Moloney Murine Leukemia Virus (MMLV) All prepared in a total typical PCR reaction volume of 20-50 μl

13. PCR Con….. • composition of the PCR reaction mix may vary dependant on the DNA polymerase used • Low concentrations of detergents such as Triton X-100, Tween-20, betain or dimethylsulphoxide (DMSO) may also be included in the PCR mix to help increase the specificity of primer binding. • DMSO may assist in overcoming problems caused by secondary structure or possibly even inhibitory compounds. • The composition of the PCR mix should ideally be optimized • All PCR reaction ingredients should be stored in a freezer in a dedicated “clean” room • multiple PCRs in a single “batch”

14. Miscellaneous Considerations • Several additional factors ….Success or failure of PCR • Nature and use of the PCR reaction tube • Changes in the quality of ingredients affect the sensitivity and specificity of the PCR reaction • Controls are particularly important

15. DNA Extraction /RNA Extraction

16. The Different Types and Varietiesof Nucleic Acid Target Molecules • must be readily accessible to primers and DNA polymerase and free from inhibitory concentrations of contaminating proteins, lipids, carbohydrates and salts • Blood samples • RNA • DNA • Serum samples

17. A Brief Description of DNA and RNA Targets • Bacteria • Viruses • Class I: Double stranded DNA viruses. human papilloma viruses (cervical cancer). Replicate in the host cell cytoplasm. • Class II: Single stranded DNA viruses One example is Parvovirus B19 • Class III: Double stranded RNA viruses example is rotaviruses • Class IV: single stranded RNA viruses example is Poliomyelitis virus • Class V: single stranded RNA viruses, Influenza viruses • Class VI: Retroviruses, HIV

18. Contaminations…. • Blood • Inhibitors • kits • RNase • gloves should be worn • use of disposable RNase free plastic……. • work surfaces are also …RNase free • inactivated by….. DEPC (diethyl pyrocarbonate) or commercially available …… RNase AWAY, RNase ERASE, RNA Clean • DEPC in water being used to remove RNase • DEPC also hydrolyses the imidazole ring of purines and destroys nucleic acids. • 180°C to inactivate the DEPC • DEPC….toxic carcinogen that……….safety precautions • DNase

19. Primers

20. Primers • Hybridisation • provide the 3′ hydroxyl ends • position of the primers along DNA strands defines length of the PCR amplification product generated Primers • PCR amplification products (100–200 nucleotides), long PCR amplification products (3,000–5,000 bp) • primer annealing sites on the target DNA must be known • 18–22 nucleotides

21. Primers….. • hybridise to either the parallel or anti-parallel strand • need to be precisely complementary to their target sequences, some sequence data from the terminal ends of the DNA is required for primer design (Fig. 1.1). • Once hybridised …. 3¢-hydroxyl terminus required by DNA polymerases • effectively acting as Okazaki fragments

23. PCR Primer Design and Quality Requirements • base composition • length of primer • GC-content • annealing temperatures, • no internal complementary regions • Complementary regions…..primer/primer hybridisation…… “primer dimer” • secondary structure….. primer dimers • primer-dimer formation…..multiplex PCR protocols, • Y=G, z=C, x=T, and w=A

25. main rules for effectiveprimer design • 18 and 30 nucleotides (bp) in length. • no internal complementary regions (e.g. multiple guanosine and cytosine repeats) • GC content 50% • genetically stable….. Conserved sequences • inosine nucleotide • annealing temperatures…65°C • annealing temperatures ….. ±5°C

26. Primer Hybridisation Depend (Annealing) • annealing time….dependent on the ramp rate • heating capacity…..PCR thermocycler used • volume of the PCR mix • the concentrations of the primer and target template • composition of the sample buffer • primer length • GC content • reaction tubes • Tm = 2 (T+A) + 4 (G+C)

27. Primer Synthesis • Commercial companies • nucleic acid synthesising machines (e.g. the ABI 3400 DNA synthesizer, USA).

28. Effect of Mismatches Between PCRPrimer and Target • Mutations in the target sequence or incorrectly designed PCR primers • resulting in incomplete base pairing between the two nucleic acid molecules….. lowers the annealing temperature (Tm)……reducing the yield of specific PCR amplification products • base pair mismatches 3¢-end of the primer …… larger impact than those near the 5¢-end of the primer

29. Primer Concentration • 0.1–1 μM concentration ….. (in 50 μl) • but excess of primer…….non-specific PCR products so • Increasing annealing temperature • lowering the initial primer concentration • primer concentration versus magnesium ion concentration

30. Deoxynucleotide Triphosphates(DNTPs)

31. DNTPs…. • building blocks of nucleic acid molecules • necessary components of PCR mixes • The four individual deoxynucleotides…in PCR • Deoxyadenosine triphosphate, dATP • Deoxythymidine triphosphate, dTTP • Deoxycytosine triphosphate, dCTP • Deoxyguanosin triphosphate, dGTP • purchased either individually or as an mix • stable when stored at −20°C • Acidic in nature…so...working and stock solutions …. to be neutralized with alkaline compounds • 10 mM stock solutions • dNTPs may be lost due to non-specific heat inactivation…… during a 40 cycle PCR program….. loss of dNTPs may be in 50% of the original amount added to the PCR mix

32. DNTPs…. • dNTPs…pH 7.2...negative charge….ability to bind both mono- and divalent cations…..mg ions • Mg ions …. bound by dNTPs

34. Factors Affecting the Choice of dNTP Concentration • use a concentration of dNTPs …. only a fraction at the end of the PCR cycling • if the dNTP limiting...rate of dNTP incorporation will be reduced • 10μl……..0.2 μl

35. Modified dNTPs Typical PCR protocol….all four dNTPs • specially modified dNTPs may also be added to the PCR • helix destabilizing nucleotide>>7-deaza- 2′-deoxyguanosine • Inosine is a naturally occurring nucleotide structural build in block tRNA • capable of base pairing with any of the four dNTPs • helps to overcome amplification problems • solve problems related to sequence variation within the target DNA. • useful in amplifying CpG islands (GC rich sequence found in the promoter sequences of many higher eukaryotes)

36. Disadvantage of the use ofModified dNTPs • 7-deaza-2′-deoxyguanosine is very difficult to stain using ethidium bromide. • So dGTP is also added to the PCR mix at a concentration 25% • their presence modifies restriction digest recognition sites…. these sites may no longer be recognized by restriction enzymes.

37. M-nucleoside…… • Alternatively, another universal nucleoside (1-(2′-deoxy-β-D-ribofuranosyl)-3-nitropyrrole) has been described in the literature • This nucleoside is known as “M-nucleoside” • maintains the ability …. four normal dNTPs • its incorporation in PCR primers affects the Tm of primer annealing much less markedly than inosine

39. The PCR Buffer

40. PCR Buffer • (10X concentrated) PCR reaction buffer • DNA polymerase activity…pH conditions should be maintained • ammonium sulphate help to remove any inhibitory products, such as pyrophosphate, ….. accumulate during PCR amplification.

41. Monovalent Ions

42. Monovalent Ions…… • Sodium (Na+), potassium (K+) and ammonium (NH+4) ions stimulate the activity of polymerases • Potassium ions have an optimum stimulatory effect on PCR DNA polymerases • NH+ 4 ions compete for the hydrogen bonds

43. Divalent

44. Magnesium Ions…… • important ingredient of PCR reaction • co-factor for thermostable DNA polymerase activity, stimulating the enzymes • optimization is frequently performed in combination with an experiment to determine the optimum dNTP concentration • magnesium ion concentration range of between 0.5 and 5 Mm • elevated magnesium ion concentrations inhibit PCR……double stranded DNA …actually stabilized …. • increasing the risk of nonspecific product amplification

45. Taq and Other ThermostableDNA Polymerases

46. DNA Polymerases…… • DNA polymerase….the success of PCR • Klenow fragment of DNA-dependent DNA polymerase I…. disadvantage • 1 lacks a 5¢-3¢ exonuclease activity.... • optimum reaction temperature at 37°C… • impossible to generate PCR….longer than 400 bp

47. Taq polymerase “in 1976 Chien described a 94kD thermostable DNA-dependant DNA polymerase derived from a eubacterium called Thermus aquaticus” • 3¢-5¢ proofreading domain…. missing

49. The Advantages and Disadvantages of Taq over Klenow Fragment DNA Polymerase

50. Advantages… • Heat stable … half-life of 130 minutes at a temperature of 92.5°C. • Reaction vial not… opened in order to add fresh enzyme … reducing contamination • optimum reactivity …. 70°C-80°C…helps to prevent any secondary or tertiary structure • High optimum temperature …prevent mispriming of the PCR primer • Has increased processivity at elevated incubation temperature. • Capacity to synthesize relatively long PCR products…4,000 bp (8,000–10,000 DNA quality) • Generates significantly higher yields of amplification products (ten times higher) 60 nucleotides per second at 72°C, but • only 1.5 nucleotides per second at 37°C • Enzyme is not inhibited by chemical contaminants remaining after nucleic acid extraction, e.g. chloroform • Taq enzyme frequently adds an overhanging nucleotide