1 / 19

DOT Submittal Requirements

DOT Submittal Requirements. A Manufacturer’s Perspective Andrew S. Fulkerson DOT Market Specialist The Euclid Chemical Company. What do the following product types have in common? Rapid Setting Cement Based Repair Materials Epoxy Adhesives Non-Shrink Cement Based Grouts.

Pat_Xavi
Download Presentation

DOT Submittal Requirements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DOT Submittal Requirements A Manufacturer’s Perspective Andrew S. Fulkerson DOT Market Specialist The Euclid Chemical Company

  2. What do the following product types have in common? Rapid Setting Cement Based Repair Materials Epoxy Adhesives Non-Shrink Cement Based Grouts

  3. They all have an ASTM Standard Specification that gives Pass/Fail Criteria. ASTM C 881 - Epoxy Adhesives ASTM C 928 - Rapid Setting Cement Based Repair Material ASTM C 1107 - Non-Shrink Cement Based Grouts

  4. Does this matter? NO!!

  5. Most DOT’s require independent laboratory testing for their specification. These testing requirements may include the following: • ASTM • Modified ASTM • State Test Methods • National Transportation Product Evaluation Program (NTPEP)

  6. Rapid Hardening Repair for Florida Section 930 – Materials for Concrete Repair • Rapid Hardening Mortar • Very Rapid Hardening Mortar • MAPC (High Stress Areas)

  7. Rapid Hardening Repair for Texas DMS 4655 – Concrete Repair Materials • Type A-1-Horizontal Repairs < 4 in. • Type A-2 – Horizontal Repairs > 4 in. • Type A-3 – Vertical or Overhead Repairs < 1 in. • Type A-4 – Vertical or Overhead Repair between 1 in. and 6 in. • Type B – Ultra-Rapid Repairs

  8. Lets look at the following Section 930 – Materials for Concrete Repair • Rapid Hardening Mortar • Very Rapid Hardening Mortar DMS 4655 – Concrete Repair Materials • Type A-1-Horizontal Repairs < 4 in.

  9. How do they compare?

  10. How do they compare? The differences are as follows: • Testing Age and method of Compressive Strength • Florida Requires ASTM C 109 @ 3 hrs, 24 hrs, 7D, and 28D • Texas requires ASTM C 39 @ 6 hr, 24 hrs, and 28D • Method for Coefficient of Thermal Expansion • Florida requires ASTM C 531 • Texas requires their own test method which requires higher temperatures

  11. The differences are as follows: Slant Shear Bond Strength ASTM C 882 Florida requires 24 hrs and 7 D Texas requires 3 D with much higher value and gives a specified concrete mix design for the test cylinders Shrinkage Florida Requires ASTM C 157 using 1 in. beams with a specified curing period that differs from ASTM C 928. Texas requires ASTM C 157 using 3 in. beams with another specified curing period that differs from Florida and ASTM C 928 How do they compare?

  12. Other Requirements Outside of Testing • Packaging • Lot numbering • Born on Date vs. Use By Date • Shelf Life • Recertification • Re-testing frequencies • Certification Letter on each Lot

  13. NTPEP Now lets throw more requirements into the mix!!!! NTPEP is a testing program through AASHTO that utilizes the laboratories of certain DOT’s to test a wide array of products. Curing Compounds, chemical admixtures, polymer modified overlayments, and rapid setting repair materials, to name a few.

  14. Alabama Colorado Georgia Kentucky Louisiana Maine Missouri New Jersey Tennessee Wisconsin NTPEP All ten of the following States require this testing along with an independent laboratory report to show compliance to their actual specification for Rapid Hardening Concrete Repair.

  15. What does this mean for Manufacturer’s • Additional cost for product approval • Delayed results, NTPEP testing is done once a year and has a two year testing cycle. • Colorado requires this testing to be re-started every 3 yrs after approval. • NTPEP requires it every 5 yrs after initial testing is conducted.

  16. One example was given regarding the amount of testing required to get a product approved in multiple State’s. Manufacturer’s must choose the right product to meet the specifications but also to give a return on investment.

  17. QUESTIONS???? Thank You

More Related