Chemical Hazards

1. Chemical Hazards The overall objective for this module is that participants will extract and interpret chemical hazard information from a Material Safety Data Sheet

2. Overview • Chemical terms and definitions that will help you when handling chemicals • General properties of common chemicals and how to handle them appropriately • How to use the Material Safety Data Sheet to find information about a chemical

3. Expectations • Identify three types of organic hydrocarbons • Identify the three major hazards associated with organic compounds • List the three main types of inorganic chemicals • Identify the major hazard associated with inorganic chemicals • Identify the two chemical types indicated on the pH scale • Identify a corrosive material based on the OSHA definition • Use the Material Safety Data Sheet to find information about a chemical

4. What Are Chemicals?

5. Periodic Table of the Elements

6. Chemical Symbols • Calcium Ca • Carbon C • Oxygen O Combine to form Calcium Carbonate CaCO3 A Chemical Compound!

7. Two Major Chemical Groups • Organic • Inorganic

8. Organic Chemicals • Based on the chemistry of carbon • Hydrocarbons are the root of most organic chemicals

9. Organic Chemicals • Aromatic Hydrocarbons • Benzene, toluene, xylene, and naphthalene • Halogenated Hydrocarbons • Freon, CFC’S, and PCB’S • Phosphorylated Hydrocarbons • Organophosphates • Oxygenated Hydrocarbons • Aldehydes, ketones, and carboxylic acids

10. Hazards of Organic Chemicals • Most are flammable • Characteristics such as flashpoints lower and upper flammability and autoignition temperatures should be known • Most are anesthetics • They should always be used in well-ventilated spaces • Some are carcinogens • Toxicity limits should be known and appropriate personal protective equipment worn

11. Inorganic Chemicals • Acids • Bases • Salts cleaner

12. pH Scale

13. Identifying Acids • Acids have a pH less than 7 • High concentration of H+ ions • Turn litmus paper red • Taste tart • React with metals to form hydrogen gas

14. Identifying Bases • Bases have a pH greater than 7 • Low concentration of H+ ions • Turn litmus paper blue • Taste bitter • Have a slippery, soapy feel

15. Identifying Salts • Salts are one or more metal ions combined with one or more nonmetal ions • Formed when an acid and base react with one another • May be toxic and contain heavy metals

16. Hazard of Inorganic Chemicals • Corrosive • The second most commonly used and transported group of hazardous materials. • “Any liquid that has a severe corrosion rate on steel”.

17. Hazard of Inorganic Chemicals • Corrosive OSHA Definition: • “A chemical that causes visible destruction of, or irreversible alterations in, living tissue by chemical action at the site of contact.” 

18. Properties of Chemicals • Physical properties - Can be measured • Chemical properties - How a chemical will react

19. Physical Properties • Volatility • Boiling point • Vapor pressure • Measure of pressure that a gas/vapor will exert on the inside of a closed container • Measured in mm of mercury or inches of mercury • As temperatures rise the vapor pressure increases

20. Physical Properties • Evaporation rate • Melting / Freezing point • Specific gravity • Water = 1 • Less than one is less dense and will float in water • More than one is more dense and will sink in water

21. Physical Properties • Vapor Density • When the gases and vapors are compared to normal room air (air = 1) • Any gas or vapor that has a number less than one is less dense and will rise in air • Any gas or vapor that has a number larger than one is more dense and will sink in air • Solubility • Chemical Compatibility

22. Physical Properties • pH • It is a scale • Low and high numbers are corrosive • Flashpoint • Minimum temperature at which a substance gives off vapor sufficient to form an ignitable mixture with air

23. Physical Properties • Flammable - Flashpoint below 1410 F • Combustible -Flashpoint above 1410 F and below 2000 F • Ignitable - Flashpoint less than 1410 F

24. Physical Properties • Lower Flammable Limit (LFL or LEL) and Upper Flammable Limit (UFL or UEL) • Are the range of chemical vapor to air ratio that needs to exist before a chemical will ignite

25. Physical Properties • Lower Flammable Limit • Lowest concentration, by volume in air, which will explode, ignite, or burn when there is an ignition source • Upper Flammable Limit • Maximum concentration, by volume in air, which will explode, ignite, or burn when there is an ignition source

26. Fires • Three elements necessary for a fire to occur: • Oxidizer (promote burning) • Fuel (something to burn) • Ignition source

27. Chemical Properties • Oxidizers • Pyrophoric • Water reactive

28. Oxidizers Chemicals that contain oxygen and will give it up readily May cause or enhance the combustion of other materials

29. Pyrophoric Solids and liquids spontaneously ignite in air at certain temperatures

30. Water Reactive Chemicals become spontaneously flammable or give off flammable or toxic gas when in contact with water

31. Chemical References Material Safety Data Sheets The Chemical Dictionary Product Label Farm Chemical Handbook Poison Control Center

32. Material Safety Data Sheets (MSDS) OSHA Requirements Identity Physical and Chemical Characteristics Physical Hazards Health Hazards Routes of Entry PEL and TLV

33. OSHA Requirements Carcinogenicity Precautions for Safe Handling and Use Control Measures Emergency and First Aid Procedures Date of Preparation Name, Address, Phone Number of Prepare Material Safety Data Sheets (MSDS)

34. Understanding types of chemicals, properties, potential hazards, and use of reference materials will enable you to handle chemicals safely and appropriately