1 / 12

XTAX table repair

XTAX table repair. 12 tables repaired 8 initially foreseen (T2+T4) + 4 repaired in addition (T6). Story-board (I). 1 Bunker assembly 2 shielding roof removal 3 service disconnection. 4 table handling ( see beam tracks ). Story-board (II).

ziya
Download Presentation

XTAX table repair

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. XTAX table repair 12 tables repaired 8 initially foreseen (T2+T4) + 4 repaired in addition (T6)

  2. Story-board (I) 1 Bunker assembly 2 shielding roof removal 3 service disconnection 4 table handling (seebeamtracks )

  3. Story-board (II) 5 springremoval 6 oldmotorremoval 7 new motor installation 8 table back handling

  4. New hardware implemented on this worksite • PR537 crane made remotely controlled • Vision system deployed (10 cameras) • New remote controlled lifting jigs (1 and 2 hooks) • Inspection & Remote RP surveytool • On-line dosimetry • Improved communication means (headsets, audio conferenceduringrepair) 2 4 3 5

  5. XTAX table routing in TCC2 Dry runwithdummy table  routingaccuratelydefined (X,Y,Z) and tested T2 T4 T6

  6. Encountered challenging situations

  7. Recoveryaction on 13/04/2012 • During its removal, one cup housing the downstream right foot of the 043018 table felt down and must be repositioned. • Once re-installed, the table 043018 turned out to be misaligned by 4 cm at the level of the positioning grid system • Investigation on spare parts  confirm our feeling of a wrong repositioning of the cup. • Decide an inspection on site • Dose rate estimate around 20 mSv/h  shielding required • Shielding installation ( L shape 4 cm thick lead dose rate reduced to 2.3 – 2.7 mSv/h) • Removal of the felt down cup + 3 rollers & inspection of the 2 other cups • Replacement by spare parts

  8. Quality Assurance plan • One slip by repaired table • Who did what, when, how,… • Motor test report • Test in laboratory (motor only) • Test in the bunker (motor + gearbox) • Final test in place (motor + load, full range tested) H2 aval 021025

  9. Dosimetry stats

  10. Dosimetry stats

  11. Dosimetry stats Motorrepairprocedureverywellstudied and optimised real dose <<<< estimates Proximity intervention lessoptimised  real doses = estimates Ways of improvement : cold cell or new connection design

  12. Dosimetry stats Self-commitment of max 600 uSv/ personunder control

More Related