1 / 24

Ch 19 Earthquakes

Ch 19 Earthquakes. Forces within Earth. Stress = total force acting on crustal rocks per unit area . Strain = deformation of materials in response to stress. Fault. = any fracture or system of fractures along which earth moves. = due to crustal rock failure when stress is too great.

ziarre
Download Presentation

Ch 19 Earthquakes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ch 19 Earthquakes

  2. Forces within Earth • Stress = total force acting on crustal rocks per unit area • Strain = deformation of materials in response to stress

  3. Fault • = any fracture or system of fractures along which earth moves. • = due to crustal rock failure when stress is too great

  4. Types of Seismic Waves • = vibrations of ground made from an earthquake • Types: I. Body Waves: • Primary (P) • Secondary (s) II. Surface Waves: • Surface

  5. Earthquake Waves • Primary Waves • Aka – P waves • Squeeze and push rocks in the direction along which the waves are traveling. • Typically L to R • Secondary Waves • Aka – S waves • Slower than p • Second set of waves to be felt. • Moves at right angles to the wave- “jump rope”

  6. Surface Waves • The 3rd type of wave • Slowest of all • Sideways, up and down movement • Usually the most destructive due to the most ground movement

  7. Seismic Waves • Spread from the point of crustal rock failure • Point of wave origin is called FOCUS • Point directly above the FOCUS on the surface is called EPICENTER.

  8. Interesting fact… • The speed and direction of seismic waves can determine the inside composition of the earth!

  9. To review… • Answer book Questions 1-4 on page 533

  10. 19.2 Seismic Waves and Earth’s interior • Seismometer = a sensitive piece of equipment that measures the earth’s vibrations and disturbances • Seismogram = the written record produced by a seismometer. - These can be used to determine the epicenter of an earthquake based on the p and s wave recording times.

  11. Travel time curves

  12. Distance from the epicenter

  13. 19.3 Measuring and Locating Earthquakes • Richter Scale = the numerical rating system that measures the energy (aka -magnitude!) of the wave and the height (aka – amplitude) of it!

  14. Richter Scale

  15. To find the Magnitude: • You must measure the Height of the S wave. • This is called the AMPLITUDE

  16. Nomogram • Then you use your Distance measurement along with your found Amplitude. • The line that connects the two will cross over the amplitude!

  17. Modified Mercalli Scale • Is a scale that measures the DAMAGE done by the intensity of the earthquake.

  18. 19.4 Earthquakes and Society • Earthquake hazards are determined by many factors, can be identified, and then minimized.

  19. I. Structural failures • 1. Weak ground floors -The supporting walls of the ground floor collapse, so the building begins to pancake. • Pancaking – When the bottom floors crumble allowing the upper layers to land on top – layer by layer

  20. 2. Wood or Cement? • Wooden buildings are actually better than cement buildings. The wood can bend a bit, while the cement building will crack apart!

  21. 3. Building Height… • The taller the building, the more likely it will vibrate with the waves and fall!

  22. II. Land and Soil Failure • 1. May trigger landslides in sloped areas • In 1970 in Peru, a 7.8 magnitude quake produced a landslide that buried several towns and killed an estimated 30,000 people

  23. 2. Soil Liquefaction • Sand is really saturated with water and the shaking allows the water to accumulate and cause it to act like a true liquid.

  24. III. Tsunami • Giant wave caused by vertical seafloor motions.

More Related