What is an Audio Processor? http://masterdigital.com/24bit/radioprocess.htm Every radio station uses a transmission audio processor in front of its transmitter. The processor's most important function is to control the peak modulation of the transmitter to the legal requirements of the regulatory body in each station's nation. However, very few stations use a simple peak limiter for this function. Instead, they use more complex audio chains. These can accurately constrain peak modulation while significantly decreasing the peak-to-average ratio of the audio. This makes the station sound louder within the allowable peak modulation.
What is the goal of an Audio Processor? http://masterdigital.com/24bit/radioprocess.htm Manufacturers have tuned broadcast processors to process the clean, dynamic program material that the recording industry has typically released throughout its history. (The only significant exception that comes to mind is 45-rpm singles, which often were overtly distorted.) Because these processors have to process speech, commercials, and oldies in addition to current material, they can't be tuned exclusively for "hypercompressed," distorted CDs. Indeed, experience has shown that there's no way to tune them successfully for this degraded material.
Loudness Wars http://masterdigital.com/24bit/radioprocess.htm About three years ago, we started to notice CDs arriving at radio stations that had been pre-distorted in production or mastering to increase their loudness. For the first time, we started seeing frequently reoccurring flat topping caused by brute-force clipping in the production process. Broadcast processors react to pre-distorted CDs exactly the same way as they have reacted to accidentally clipped material for more than 20 years-they exaggerate the distortion. Because of phase rotation, the source clipping never increases on-air loudness-it just adds grunge.
Loudness Wars http://masterdigital.com/24bit/radioprocess.htm
Loudness Wars Now the Norm http://masterdigital.com/24bit/radioprocess.htm The problem today is that we now have sophisticated and powerful audio processing for the broadcast transmission system and this processing does not coexist well with a signal that has already been severely clipped. Unfortunately, with current pop CDs, the example shown above is more the norm than the exception.
How does the Audio Processor handle hypercompressed material? http://masterdigital.com/24bit/radioprocess.htm There is a myth that broadcast processing will affect hypercompressed material less than it will more naturally produced material. This is true in only one aspect-if there is no long-term dynamic range coming in, then the broadcast processor's AGC will not further reduce it. However, the broadcast processor will still operate on the short-term envelopes of hypercompressed material and will further reduce the peak-to-average ratio, degrading the sound even more.
The Problem http://masterdigital.com/24bit/radioprocess.htm Hypercompressed material does not sound louder on the air. It sounds more distorted, making the radio sound broken in extreme cases. It sounds small, busy, and flat. It does not feel good to the listener when turned up, so he or she hears it as background music. Hypercompression, when combined with "major-market" levels of broadcast processing, sucks the drama and life from music. In more extreme cases, it sounds overtly distorted and is likely to cause tune-outs by adults, particularly women.
How it works: Phase Rotator http://masterdigital.com/24bit/radioprocess.htm The phase rotator is a chain of allpass filters (typically four poles, all at 200Hz) whose group delay is very non-constant as a function of frequency. The phase rotator makes voice waveforms more symmetrical and can sometimes reduce the peak-to-average ratio of voice by 3-4dB. Because this processing is linear (it adds no new frequencies to the spectrum, so it doesn't sound raspy or fuzzy)
How it works: AGC (automatic gain control) http://masterdigital.com/24bit/radioprocess.htm Its function is to compensate for operator errors (in live production environments) and for varying average levels (in automated environments). The price to be paid is simple: the AGC will eliminate long-term dynamics in your recording. Virtually all radio station program directors want their stations to stay loud always, eliminating the risk that someone tuning the radio to their station will either miss the station completely or will think that it's weak and can't be received satisfactorily. Radio people often call this effect "dropping off the dial."
How it works: Stereo Enhancement http://masterdigital.com/24bit/radioprocess.htm The common purpose of stereo enhancement is to make the signal stand out dramatically when the car radio listener punches the tuning button. It's a technique to make the sound bigger and more dramatic. Not all processors implement stereo enhancement.
How it works: Equalization http://masterdigital.com/24bit/radioprocess.htm EQ has two purposes in a broadcast processor. The first is to establish a signature for a given radio station that brands the station by creating a "house sound." The second purpose is to compensate for the frequency contouring caused by the subsequent multiband dynamics processing and high frequency limiting.
How it works: Multiband Compression and Limiting http://masterdigital.com/24bit/radioprocess.htm The multiband compressor/limiter reduces dynamic range and increases audio density to achieve competitive loudness and dial impact.
How it works: Pre-Emphasis and HF Limiting http://masterdigital.com/24bit/radioprocess.htm FM radio is pre-emphasized at 50 microseconds or 75 microseconds, depending on the country in which the transmission occurs. Pre-emphasis is a 6dB/octave high frequency boost that's 3dB up at 2.1kHz (75µs) or 3.2kHz (50µs). With 75µs pre-emphasis, 15kHz is up 17dB!
How it works: Pre-Emphasis and HF Limiting http://masterdigital.com/24bit/radioprocess.htm Depending on the processor's manufacturer, pre-emphasis may be applied before or after the multiband compressor/limiter. The important thing for mixers and mastering engineers to understand is that putting lots of energy above 5kHz creates significant problems for any broadcast processor because the pre-emphasis will greatly increase this energy. To prevent loudness loss, the processor applies high frequency limiting to these boosted high frequencies. HF limiting may cause the sound to become dull, distorted, or both, in various combinations. One of the most important differences between competing processors is how effectively a given processor performs HF limiting to minimize audible side effects. In state-of-the-art processors, HF limiting is usually performed partially by HF gain reduction and partially by distortion-cancelled clipping.
How it works: Clipping http://masterdigital.com/24bit/radioprocess.htm In most processors, the clipping stage is the primary means of peak limiting. It's crucial to broadcast processor performance. Because of the FM pre-emphasis, simple clipping doesn't work well at all. In the late seventies, one of the authors of this article (R.O.) invented distortion-cancelled clipping. This manipulates the distortion spectrum added by the clipper's action. In FM, it typically removes the clipper-induced distortion below 2kHz (the flat part of the receiver's frequency response). This typically adds about 1dB to the peak level emerging from the clipper, but, in exchange, allows the clipper to be driven much harder than would otherwise be possible. Clipping also causes minimal HF loss by comparison to HF limiting that uses gain reduction. For these reasons, most FM broadcast processors use the maximum practical amount of clipping that's consistent with acceptably low audible distortion.
About the Orban 8200: Inputs and Outputs http://www.broadcaststore.com/store/model_detail.cfm?id=798442 Connectors: XLR-type, EMI-suppressed. Pin 1 Chassis, Pins 2 and 3 electronically balanced, floating and symmetrical.
About the Orban 8200: Remote Computer Connect http://www.broadcaststore.com/store/model_detail.cfm?id=798442 Configuration: RS-232 interfaces to connect to IBM PC-compatible computers, directly or via modem, for remote control and metering.
About the Orban 8200: Misc. Information http://www.broadcaststore.com/store/model_detail.cfm?id=798442 LOCATION:As close to FM exciter as practical. DIGITAL SIGNAL PROCESSINGDevice: Motorola DSP56001.Performance: 24-bit processing. 144dB internal dynamic range. PRESET PROGRAMMINGFunction: Save processing settings for recall from the front panel, by remote control, by remote computer or by Automation preset switching.Number of user presets: 32. DIMENSIONS19" (48.3cm) wide, 7" (17.8cm) high, 15" (38.1cm) deep. 4 rack units. The first FM processor adopting DSP technology (1991).
About the Orban 8200: How it’s advertised http://www.broadcaststore.com/store/model_detail.cfm?id=798442 The Orban OPTIMOD-FM 8200 provides every feature that a broadcaster needs. It controls peak modulation precisely without composite clipping. Its pristine baseband protects subcarriers, RDS, and the stereo pilot tone, maximizing real-world receiver performance. Its versatile subjective setup controls allow the broadcaster to match it precisely to the target audience. And its natural, musical sound delivers proven ratings and audience share.