1 / 11

Data Warts and Causes

Data Warts and Causes. Pressure Temperature Salinity . Data Warts & Causes: Temperature. Thermal mass errors. As the float ascends through temperature gradients, the cell corrupts the water temperature. The temperature corruption induces a conductivity error.

zalika
Download Presentation

Data Warts and Causes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Data Warts and Causes Pressure Temperature Salinity

  2. Data Warts & Causes: Temperature • Thermal mass errors. • As the float ascends through temperature gradients, the cell corrupts the water temperature. The temperature corruption induces a conductivity error.

  3. Data Warts & Causes: Temperature • Salinity drifts caused by long-term temperature drifts?

  4. Warts & Causes: Pressure • Druck Snowflakes • Internal shorts caused by conductive particles suspended in oil. • Pressure samples are erratic or off-scale.

  5. Warts & Causes: Pressure • Druck Microleaks

  6. Warts & Causes: Pressure • APEXs with Apf8 controllers don’t report negative surface pressure.

  7. Warts & Causes: Salinity • Salinity drifts high of correct.

  8. Warts & Causes: Salinity • Salinity drifts high toward correct. • TBT contamination flushes out of the cell as the profile is collected.

  9. Warts & Causes: Salinity • Salinity jumps low of correct.

  10. Warts & Causes: Salinity • Salinity hooks. • STP sample collected at the apogee of descent forms a high-of-correct “hook” with respect to shallower samples.

  11. Warts & Causes: Salinity • Salinity hooks. • Ascent/descent asymmetry in Bernoulli flushing. • Higher salinity water in cell carried from surface (or park level) to deep profile level. • Incomplete flushing results in salinity that is high-of-correct by ~0.005PSU.

More Related