1 / 17

PROPANE STEAM REFORMING FOR FUEL CELLS

PROPANE STEAM REFORMING FOR FUEL CELLS. By Tamika Brown. e -. e -. H 2. H 2. H 2. H 2. H 2. H 2. H 2. O 2. O 2. O 2. O 2. O 2. O 2. O 2. H 2 O. H 2 O. H 2 O. H +. H +. What is a Fuel Cell, and how does it work?. A fuel cell is an electrochemical device

yuri
Download Presentation

PROPANE STEAM REFORMING FOR FUEL CELLS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PROPANE STEAM REFORMING FOR FUEL CELLS By Tamika Brown

  2. e- e- H2 H2 H2 H2 H2 H2 H2 O2 O2 O2 O2 O2 O2 O2 H2O H2O H2O H+ H+ What is a Fuel Cell, and how does it work? • A fuel cell is an electrochemical device • that combines hydrogen fuel and oxygen • from air to produce electricity and water. • In a Polymer Electrolyte Fuel Cell, Hydrogen ions form at the anode, and • diffuse through the electrolyte and react • with oxygen at the cathode. • Anode: H2→ 2H + (aq) +2e- • Cathode: ½ O2 + 2H + (aq) + 2e- → H2O (l) Anode Cathode Electrolyte

  3. Uses of Fuel Cells • Transportation: • Phosphoric Acid Fuel Cell • Anode: H2(g) →2H + (aq) + 2e- • Cathode: ½ O2 (g) + 2H+ (aq) + 2e- → H2O(l) • Portable: • Proton Exchange Membrane Fuel Cell • Anode: H2(g) → 2H + (aq) + 2e- • Cathode: Cathode: ½ O2 (g) + 2H+ (aq) + 2e- → H2O(l) • Stationary: • Solid Oxide Fuel Cells • Anode: H2(g) + O2→ H2O(g) + 2e- • Cathode: ½ O2 (g) + 2e- → O2-

  4. Fuel Cell uses • Fuel Cell transit buses in Chicago (Ballard Corp) • Anode: H2(g) → 2H + (aq) + 2e- • Cathode: ½ O2 (g) + 2H+ (aq) + 2e- → H2O(l) • Energy Research Corp. • Anode: H2(g) + 2CO3 → H2O(g) + CO2(g) + 2e- • Cathode: ½ O2 (g) + CO2 + 2e- → 2CO3

  5. Hydrogen • Hydrogen is the most abundant element in the universe • No known sources of gaseous hydrogen • Hydrogen generated from another energy source such as petroleum or from water through electrolysis • energy (electricity) + 2 H2O ->  O2  + 2 H2 SO HOW DO WE GENERATE AN ADEQUATE SUPPLY OF HYDROGEN FOR FUEL CELLS . . . . .

  6. Fuel Processor/Reformer • Reformers convert hydrocarbon fuels into hydrogen • Steam and/or oxygen along with a catalyst are needed • Carbon dioxide is a byproduct Electric Power Conditioner Air Fuel Exhaust Fuel Processor Spent-Gas Burner Fuel Cell Stack Air H2 Thermal & Water Management

  7. 3 Types of Reactions *Steam Reforming: • Hydrocarbon+ Steam + catalyst → H2 + CO2 • Partial Oxidation Reforming: • Hydrocarbon + Oxygen + catalyst → H2 + CO2 • Autothermal Reforming: • Hydrocarbon + Oxygen + Steam + catalyst → H2 + CO2

  8. Why choose Steam Reforming? • Tailor to application • Ex. This particular investigation focuses on stationary uses such as power plants and industrial plants • Partial Oxidation (POx) can be tailored to meet certain vehicle regulatory standards • Autothermal Reforming (ATR) is a thermal balance between (POx) and Steam Reforming

  9. What is Hydrocarbon Source? • Liquefied Petroleum Gas (LPG), • Consists mainly of propane, propylene, butane and butylenes in various mixtures. • In the U.S. the mixture is mainly propane.

  10. Why choose LPG? • LPG can be used in the home, commercial businesses, industry, and transportation • The residential and commercial markets where LPG is used make up about 50% of the world total LP gas retail sales

  11. Fuel Processor/Reformer Hydrocarbon + H2O(g) + catalyst → H2 + O2 1.Inlets to Reactor a) Water → Steam b) Fuel (liquid) → Vapor c) Fuel (gas) d) Air (POx or ATR) e) Catalyst 2. Reactor a) Sampling ports 3. Analytical Train a) CO/CO2 detector b) Mass flow indicator

  12. What are the Goals of Experimentation? • Explore how operating conditions affect the reaction kinetics • Variables: temperature, flow rates, catalyst • Data from reactor model → kinetics → full scale reactor design for commercial use

  13. Challenges of Reforming Process • Flow Rates: • High efficiency is desired at faster flow rates • Waste less fuel and energy, less catalyst • Cost: • Parts can be expensive, as well as precious metal coated catalysts. • Catalyst: • Catalyst needs to withstand impurities such as sulfur, but also produce the most amount of hydrogen possible • Temperature: • High efficiency needs to be achieved at lower temperatures • Less of a hazard, cost of parts is cheaper, and less energy is needed to maintain system

  14. Challenges Continued • Response times: • Don’t want to have to wait periods of time for hydrogen to be produced in order for fuel cell to start working. • Durability: • Catalyst and Reformer need to be durable • Coking: • Carbon deposits in the reformer • This causes clogging in the system • Interference of components in fuel mixture • Alkenes interfere with alkane reforming • This is a problem for LPG, because it is not a homogenous mixture

  15. Conclusion • If we switch to a hydrogen economy • More efficient than combustion • Less air pollution (NOx, SOx, COx) • Easily transportable • Save money (less imports) • Fuel Reforming for Fuel Cells is an intermediary technology for the production of hydrogen until a renewable source of energy can be discovered.

  16. Acknowledgments I would like to thank John Kopasz for giving me the opportunity to participate in this and other research projects. I would like to thank Dan Applegate for his knowledge and helpfulness. I express sincere gratitude to Laura Miller for her patience, time, and wisdom. Last but not least, I would like to thank the U.S. Department of Energy for giving students a change to grow scientifically as well as professionally.

  17. References • “What is a Fuel Cell.” Fuel Cells 2000. 2 March 2004. • http://www.fuelcells.org/whatis.htm • Carter, David, “Fuel Cell Power: What’s taking so long?” • IPMI 25th International Precious Metals Conference, June 9-12, 2001. • “Electrolysis: Obtaining hydrogen from water: The Basis for a Solar-Hydrogen Economy.” 4 April 2005. http://www.nmsea.org • “Chicago’s Fuel Cell Buses Mobilized.” Hydrogen Newsletter Winter 1998: Hydrogen Buses. 4 April 2005. http://www.hydrogenus.com/advocate/ad31cta.htm • “Pocket-size PEMs.” Pocket-size PEMs. 4 April 2005. http://www.memagazine.org/backissues/february2000/features/pems/pems.html • Miller, Laura, “Safety Review for Long Term Test Reactor CMT50-0006-EP-Rev 08 NEPA Document ER-281.” February 17, 2005 pp. 1-15. • Laura, Miller, “Science Careers in Search of Women Conference.” March 10, 2005. • “What is Propane?” Alternative Fuels Data Center: What is Propane?” 23 March 2005. http://www.eere.energy.gov/afdc/altfuel/whatisprop.html. • “What is LP Gas?” World LP Gas Association. 29 March 2005. http://www.worldpgas.com/mainpages/aboutpgas/whatislpgas.php.

More Related