1 / 1

Laser-Synchronization

This document discusses the laser synchronization process for achieving precise output and frequency control using EP016 and EP195 components. It explores the use of phase comparators, delay scalars, and loop filters to maintain synchronization at reference frequencies such as 1/n and 1/m. The system's performance includes a filter with a cutoff frequency of 20 kHz and a DC gain of 100. Additionally, we provide setup instructions for adjusting synchronization to the reference frequency within a delay range of 0 to 10 ns, specifically designed for SMD applications.

xenia
Download Presentation

Laser-Synchronization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser-Synchronization EP016 EP195 Output Amps EP16VA Phase comparator Delay Scalar EP140 Loop Filter Reference Frequency 1/n set AD712K EP16VA Scalar Laser feed back 1/m EP016 EP16VA Filter w=20kHz DC Gain=100 all in SMD Ref: 1.3GHz or 9MHz Laser: 81MHz or 1.3GHz Delay: 0...10ns Sync. must by adjusted to ref.freq Sync

More Related