1 / 29

Pipeline Architecture since 1985

Pipeline Architecture since 1985. Last time, we completed the 5-stage pipeline MIPS. Processors like this were first shipped around 1985 Still a fundamentally solid design Nevertheless, there have been advances in the past 25 years. Deeper Pipelines Dynamic Branch Prediction

Download Presentation

Pipeline Architecture since 1985

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pipeline Architecture since 1985 • Last time, we completed the 5-stage pipeline MIPS. • Processors like this were first shipped around 1985 • Still a fundamentally solid design • Nevertheless, there have been advances in the past 25 years. • Deeper Pipelines • Dynamic Branch Prediction • Branch Target Buffers (removing the taken branch penalty) • Multiple Issue / Superscalar • Out-of-order Scheduling • I will briefly overview these ideas • For more complete coverage, see CS433

  2. Informal Early Feedback, Part I • Top likes: (in order of frequency) • Presentation style • Handouts & in-class questions • Piazza • Everything • Discussion sections • Slides • SPIMbot • Appropriate MPs

  3. Informal Early Feedback, Part II • Top wants: (in order of frequency) • Video record lecture • Upload annotated lecture slides / MP solutions faster • Release slides before lecture • More (online) practice problems • More office hours • More SPIMbot testcases • Motivate the hardware material • List corresponding readings

  4. Informal Early Feedback, Part III • Top gripes: (in order of frequency) • Xspim is janky (use QtSpim) • EWS machines suck, let us run on our own computers • Drop handin, use SVN • Errors in MPs

  5. Recall our equation for execution time • Make things faster by making any component smaller!! CPU timeX,P = Instructions executedP * CPIX,P * Clock cycle timeX • We proposed pipelining to reduce clock cycle time. • If some is good, more is better right? Hardware can affect these

  6. “Superpipeling” MIPS R4000

  7. More Superpipelining

  8. Historical data from Intel’s processors Pipeline depths and frequency at introduction. What Happened?

  9. There is a cost to deep pipelines • Two effects: • Diminishing returns: pipeline register latency becomes significant • Negatively impacts CPI (longer stalls, more instructions flushed)

  10. Mitigating CPI loss 1: Dynamic Branch Prediction • “Predict not-taken” is cheap, but • Some branches are almost always taken • Like loop back edges. • It turns out, instructions tend to do the same things over and over again • Idea: Use past history to predict future behavior • First attempt: • Keep 1 bit per branch that remembers last outcome • What fraction of time will the highlighted branch mispredict? for (int i = 0 ; i < 1000 ; i ++) { for (int j = 0 ; j < 10 ; j ++) { // do something } }

  11. Two-bit branch prediction • Solution: add longer term memory (hysteresis) • Use a saturating 2-bit counter: • Increment when branch taken • Decrement when branch not-taken • Use top bit as prediction • How often will the branch mispredict? T T T T T T T T T NT T T T T T …

  12. Branch prediction tables • Too expensive to keep 2 bits per branch in the program • Instead keep a fixed sized table in the processor • Say 1024 2-bit counters. • “Hash” the program counter (PC) to construct an index: • Index = (PC >> 2) ^ (PC >> 12) • Multiple branches will map to the same entry (interference) • But generally not at the same time • Programs tend to have working sets.

  13. When to predict branches? • Need: • PC (to access predictor) • To know it is a branch (must have decoded the instruction) • The branch target (computed from the instruction bits) • How many flushes on a not taken prediction? • How many flushes on a taken prediction? • Is this the best we can do?

  14. Mitigating CPI loss 1: Branch Target Buffers • Need: • PC • To know it is a branch • The branch target • Create a table: Branch Target Buffer • Allocate an entry whenever a branch is taken (& not already present) Already have at fetch. Can remember and make available at fetch

  15. 1 0 1 0 Add BTB accessed in parallel with reading the instruction • If matching entry found, and … • 2-bit counter predicts taken • Redirect fetch to branch target • Instead of PC+4 • What is the taken branch penalty? • (i.e., how many flushes on a predicted taken branch?) Misprediction from EX stage Match & Taken Target BTB PC 4 P C Read address Instruction [31-0] Instruction memory

  16. Back to our equation for execution time CPU timeX,P = Instructions executedP * CPIX,P * Clock cycle timeX • Removing stalls & flushes can bring CPI down 1. • Can we bring it lower?

  17. Multiple Issue

  18. Issue width over time

  19. Static Multiple Issue • Compiler groups instructions into issue packets • Group of instructions that can be issued on a single cycle • Determined by pipeline resources required • Think of an issue packet as a very long instruction • Specifies multiple concurrent operations • Compiler must remove some/all hazards • Reorder instructions into issue packets • No dependencies within a packet • Pad with nop if necessary

  20. Example: MIPS with Static Dual Issue • Dual-issue packets • One ALU/branch instruction • One load/store instruction • 64-bit aligned • ALU/branch, then load/store • Pad an unused instruction with nop

  21. Hazards in the Dual-Issue MIPS • More instructions executing in parallel • EX data hazard • Forwarding avoided stalls with single-issue • Now can’t use ALU result in load/store in same packet • add $t0, $s0, $s1load $s2, 0($t0) • Split into two packets, effectively a stall • Load-use hazard • Still one cycle use latency, but now two instructions • More aggressive scheduling required

  22. Scheduling Example • Schedule this for dual-issue MIPS Loop: lw $t0, 0($s1) # $t0=array element addu $t0, $t0, $s2 # add scalar in $s2 sw $t0, 0($s1) # store result addi $s1, $s1,–4 # decrement pointer bne $s1, $zero, Loop # branch $s1!=0 • IPC = 5/4 = 1.25 (c.f. peak IPC = 2)

  23. Loop Unrolling • Replicate loop body to expose more parallelism • Reduces loop-control overhead • Use different registers per replication • Called register renaming • Avoid loop-carried anti-dependencies • Store followed by a load of the same register • Aka “name dependence” • Reuse of a register name

  24. Loop Unrolling Example • IPC = 14/8 = 1.75 • Closer to 2, but at cost of registers and code size

  25. Dynamic Multiple Issue = Superscalar • CPU decides whether to issue 0, 1, 2, … instructions each cycle • Avoiding structural and data hazards • Avoids need for compiler scheduling • Though it may still help • Code semantics ensured by the CPU • By stalling appropriately • Limited benefit without compiler support • Adjacent instructions are often dependent

  26. Out-of-order Execution (Dynamic Scheduling) • Allow the CPU to execute instructions out of orderto avoid stalls • But commit result to registers in order • Example lw $t0, 20($s2)add $t1, $t0, $t2sub $s4, $s4, $t3slti $t5, $s4, 20 • Can start sub while add is waiting for lw • Why not just let the compiler schedule code?

  27. Implementing Out-of-Order Execution Basically, unroll loops in hardware: • Fetch instructions in program order (≤4/clock) • Predict branches as taken/not-taken • To avoid hazards on registers, rename registersusing a set of internal registers (~80 registers) • Collection of renamed instructions might execute in a window (~60 instructions) • Execute instructions with ready operands in 1 of multiple functional units (ALUs, FPUs, Ld/St) • Buffer results of executed instructions until predicted branches are resolved in reorder buffer • If predicted branch correctly, commit results in program order • If predicted branch incorrectly, discard all dependent results and start with correct PC

  28. Dynamically Scheduled CPU Preserves dependencies Hold pending operands Results also sent to any waiting reservation stations Reorders buffer for register writes Can supply operands for issued instructions

  29. Takeaway points • The 5-stage pipeline is not a bad mental model for SW developers: • Integer arithmetic is cheap • Loads can be relatively expensive • Especially if there is not other work to be done (e.g., linked list traversals) • We’ll further explain why starting on Friday • Branches can be relatively expensive • But, primarily if they are not predictable • In addition, try to avoid long serial dependences; given double D[10] • ((D[0] + D[1]) + (D[2] + D[3])) + ((D[4] + D[5]) + (D[6] + D[7])) • Is faster than: • (((((((D[0] + D[1]) + D[2]) + D[3]) + D[4]) + D[5]) + D[6]) + D[7]) • There is phenomenal engineering in modern processors

More Related