1 / 23

The Fundamental Tools

The Fundamental Tools. Of Science. Units. Some fundamental measurements in all of science: Length Time Mass Many others are combinations of these: Energy, Speed, Volume, Area. Units. International Standard Units (SI, aka metric) Length (m – meter) Mass (kg – kilogram)

wyanet
Download Presentation

The Fundamental Tools

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Fundamental Tools Of Science

  2. Units • Some fundamental measurements in all of science: • Length • Time • Mass • Many others are combinations of these: • Energy, Speed, Volume, Area

  3. Units • International Standard Units (SI, aka metric) • Length (m – meter) • Mass (kg – kilogram) • Time (s – seconds) • Energy (J – joules) • Temperature (K – kelvin)

  4. Temperature Scales 212 ˚F 100 ˚C 373 K 100 K 180˚F 100˚C 32 ˚F 0 ˚C 273 K Fahrenheit Celsius Kelvin Boiling point of water Freezing point of water Notice that 1 kelvin degree = 1 degree Celsius

  5. Temperature Scales 100 oF 38 oC 311 K oF oC K

  6. Significant Figures: Digits in a measurement having values that are known with certainty plus one digit having a value that is estimated.

  7. Reading Volume: Significant Figures on an Instrument

  8. Measurements that contain a greater number of significant figures are more precise than measurements that contain fewer significant figures. • Always select an instrument that gives you the most significant figures. Only report as many sig figs as that instrument allows

  9. The Rules

  10. All numbers 1-9 are significant. Zeros are sometimes significant, here's how you can tell: If a decimal point is present, starts on the Pacific side, move across until you get to a 1-9 digit, and start counting to the end If a decimal point is absent, start on the Atlantic side, move across until you get to a 1-9 digit, and start counting to the end 1.100 has ? sig figs, 0.00540 has ?, 40.01 has ? 1005 contains ? sig. Figs., 23,000 has ?, 1,045,090 has ?

  11. When multiplying or dividing measurements: round the answer to the same number of digits as the measurement having the fewest number of significant figures. When adding or subtracting measurements: round the answer to the same number of decimal places as the measurement having the fewest number of decimal places.

  12. Higher precision 123456.7890 • Identify the LEAST PRECISE measurement. • Identify the MOST PRECISE digit (place) within that measurement. • Round the answer to this digit (place). Lower precision

  13. Conversion • Commonly Used Prefixes: • kilo = 1000 of something ( 1km= 1000m, kg) • deci =0.1 of something (10 dm = 1m) • centi = 0.01 of something (100 cm = 1m) • milli = 0.001 of something (103 mm = 1m) • micro = 0.000001 (106µm = 1m) • nano = 0.000000001 (109 nm = 1m) • pico = 0.000000000001 (1012 pm = 1m) Refer to Conversion Chart to additional prefixes

  14. Conversion • All conversion factors are fractions. 100 cm 100 cm 1 m 100 cm = = 1 1 km 103 m 103 m 103 m = = 1 1m 10-6µm 1m 10-6µm = = 1

  15. The Nature of Units • Units are multiplied and divided like numbers are. 10 meters 2 meters = 5 (the units cancel out) 10 meters x 10 meters x 10 meters = 103 m3 (the units combine as exponents) 50 miles 10 gallons = 5 miles/gallon (the units combine as a fraction) • Only IDENTICAL UNITS on 2 numbers can be added or subtracted. • The answer always has the same units. 100 kg – 25 kg = 75 kg 100 kg – 25 m = Meaningless Dribble

  16. How many seconds are in 54 days? • Write the measurement with its unit. • If it isn’t already a fraction, write it over 1. • Set up conversion factors that • Cancel units you want to get rid of • Replace with units you are looking for • Have values on the top and bottom that are equivalent • Multiply numbers across the top • Multiply numbers across the bottom • Divide to get answer, check units

  17. Scientific Notation • 10000000000000000000000 • 0.00000000000000000000000000001 • There has to be a better way to write those numbers • Rules for scientific notation • 1) Always express the number starting with the one’s place followed by any decimal digits, times a power of 10. • 2)To express a large number, count the number of decimal places needed to move to the one’splace, and make that number the exponent of ten. • 3) To express a very small number, count the number of decimal places needed to move to the one’s place, and make that number the NEGATIVE exponent of ten. • 4) After re-expressing the number in scientific notation, check it by writing out the expanded ten, and multiply it by the measured number.

  18. Scientific Notation • Examples: 0.000000000000000000000000000000001 = 1.0 x 10-35 94140000000000000000000000000000000 = 9.414 x 1035

  19. Accuracy Precision What's the difference??

  20. Accuracy – how close a measurement is to the true value Precision – how close a set of measurements are to each other accurate & precise precise but not accurate not accurate & not precise

  21. Instruments are... Accurate if calibrated to a standard Precise if they give many significant digits

  22. Percent Error To report the accuracy of your measurements Observed – True True X 100

  23. Average Deviation To report the precision of your measurements 1 Average your measurements 2 Find the absolute values of the differences between each measurement and the average 3 Average these differences

More Related