1 / 15

Optimal Non-Circular Chain-Rings for Improved Cycling Performance

This journal club article discusses the use of non-circular chain-rings in cycling to optimize power output and minimize energy expenditure. The study investigates different shapes and orientations of chain-rings and their impact on muscular work. The results show that elliptical chain-rings with an eccentricity of 1.29 yield the greatest improvement in power output. The use of optimal chain-rings also reduces the potential for knee injuries during the pedal stroke.

wrathbone
Download Presentation

Optimal Non-Circular Chain-Rings for Improved Cycling Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Kevin Levi-Goerlich BAM Journal Club 9/26

  2. Introduction • Cycling • Push down on pedal in order to go forward • Maximal speed for minimal energy expenditure • Pedaling mechanics • Goal is to maximize the amount of power generated during each stroke • Emphasis on a smooth pedal stroke

  3. Introduction • Chainrings - Circular -Non-circular Why?

  4. Introduction

  5. Introduction • Is a non-circular chain-ring more efficient? • If so, what shape? • What offset?

  6. Methods • Forward dynamic muscle model simulation • Model • 9 segments • 10 muscle groups • Chain Ring Optimization • Circles • Ellipses • Rounded Squares • Orientation

  7. Methods • Analysis • Model was run at cadence of 60, 90, and 120rpm • 4 complete cycles were performed • Data was extracted from the last cycle • Muscular work was compared in each region to the circular control model.

  8. Results

  9. Discussion • Elliptical Chain Rings yielded the greatest improvement in power • Eccentricity of 1.29 yielded a 3% improvement at 90rpm when compared to circular simulation • Angular Velocity decreases • Takes advantage of force-length-velocity properties of muscles

  10. Discussion

  11. Discussion Injury potential • Most cycling overuse injuries are due to knee joint forces • The increased duration in the “power phase” may increase joint torques and increase knee injury potential. • 9.4%increase • However • 45% reduction in the shear and normal force impulses in the patellofemoral joint and shear forces in the tibiofemoral joint when using optimal chaing ring. • Reduced injury potential at the most vulnerable part of the pedal stroke.

  12. Discussion Limitations • Constraints from the Hill—Muscle model • Force depression • Muscle activation-deactivation changes • Drive train characteristics • Negligible • Fixed hip position • Used known circular chain ring position • Hip movement is possible, but unlikely.

  13. Discussion Application • This study focuses on maximal force output, however the same optimized chain ring conditions could benefit submaximal cycling performance.

  14. Questions?

  15. References • Cycling Muscle Usage. (n.d.). Retrieved from http://www.bikejames.com/wp-content/uploads/2012/05/ 20090505_032518_CyclingMusclesC.gif • Rankin, J. W., & Neptune, R. R. (2008). A theoretical analysis of an optimal chainring shape to maximize crank power during isokinetic pedaling. Journal of Biomechanics, 41(28), 1494-1502.

More Related